

Hw BOB ATSAMD11D
ATSAMD11D breakout board
- Size
- 21.6 × 26.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 25
- Pads
- 79
- Tracks, vias
- 158, 9
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20220211)
- Created
- 24 Jul 2019
- Updated
- 23 Mar 2022
Overview
Hw BOB ATSAMD11D is an open-source printed circuit board by burgrp, from the burgrp/hw-BOB-ATSAMD11D repository on GitHub. It is a 2-layer board of 21.6 × 26.7 mm with 16 parts on 25 nets, routed with 158 tracks and 9 vias.
It is built around the ATSAMD11D14A-SSU and SPX3819M5-L-3-3. Its parts include 6 capacitors, 4 crystals, 3 resistors, 2 ICs and 1 diode. It belongs with the SAM D and SAM boards of this library.
Main components
2ATSAMD11D14A-SSU
SOIC-20-300milSOIC-20-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)SPX3819M5-L-3-3
SOT-23-5-40℃~+85℃@(Ta) 1 20V 3.3V 420mV@(100mA) 500mA 5uA 70dB@(1kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdhw-BOB-ATSAMD11D
ATSAMD11D breakout board
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5, C6 |
| 2 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4 |
| 2 | Conn_01x10_Male | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | X1, X2 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 1k5 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 270R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 4.5n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | ATSAMD11D14A-SS | Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | SPX3819M5-L-3-3 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | SWD | Drake:SWD | X3 |
| 1 | USB_B_Micro | Drake:conn_usb_B_micro_smd-2 | X4 |
Similar boards
- 2 layers76.2 × 50.8 mm

- 4 layers68.6 × 53.3 mm

Pcb main nautilus atmega4809
apcountryman/pcb-main-nautilus-atmega4809
A Microchip ATmega4809 based mainboard PCB.
91 parts - 2 layers31 × 38 mm

- 2 layers30 × 60 mm

SplitFlapDriverATtiny1616V4
adamgmakes/SplitFlapDisplay
A modular, 3D-printed split-flap display controllable over RS485 from a Raspberry Pi. Each module holds 64 characters and modules can be chained together to build a display of any width.
25 parts190 - 4 layers35.6 × 17.8 mm

- 2 layers25.6 × 23 mm

Breakout
skorokithakis/tiny-ESP8266-breakout
A very small and basic ESP8266 breakout board
12 parts115BSD-2-Clause - 4 layers15.2 × 19 mm

- 2 layers31.4 × 20.6 mm

Window sensor V5
gadjet/Window-Door-sensor-Version-5
Version 5 of the Window/Door sensor project this time with ultra low current consumption
32 parts70GPL-2.0
Questions
How big is the Hw BOB ATSAMD11D PCB?
It measures 21.6 × 26.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hw BOB ATSAMD11D use?
16 parts, built around the ATSAMD11D14A-SSU and SPX3819M5-L-3-3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hw BOB ATSAMD11D KiCad files?
From the burgrp/hw-BOB-ATSAMD11D repository on GitHub, at the commit this page was made from: the board is board/hw-BOB-ATSAMD11D.kicad_pcb and its schematic board/hw-BOB-ATSAMD11D.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hw BOB ATSAMD11D design in my own project?
Its repository states no licence, so its author keeps all rights: ask burgrp before reusing the design.