
Teensy eurorack
newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels

TeensyPicoCap4 is an open-source printed circuit board by bungernut, from the bungernut/TeensyPicoCap repository on GitHub. It is a 2-layer board of 77.5 × 63.5 mm with 42 parts on 85 nets, routed with 313 tracks and 28 vias.
It is built around the TEENSY 4.1. Its parts include 22 connectors, 6 capacitors, 6 resistors, 2 ICs and 1 fuse. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
| LOC | Part | Digikey |
|---|---|---|
| C2 | 4.7uF | 399-C0805C475K4RAC7210CT-ND |
| C3 | 10uF | 1276-1764-1-ND |
| C4 | 0.1uF | 399-C320C104K5R5TA7305CT-ND |
| C5 | 10nF C0G | 1292-0805N103J500CT-ND |
| C6 | 47uF | 1276-3063-1-ND |
| F1 | 500mA Polyfuse | F2112CT-ND |
| J1-J3 | 2p Term Block | 2057-EBWA-02-B-ND |
| J9 | RJ45 | 1278-1052-ND |
| J16 | Barrel Jack | CP-002A-ND |
| R1 | 1k Ref | |
| R2 | 1k RTD | 223-1807-ND |
| U1 | PicoCap04 | Mouser: PCAP04-BQFM-24 |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | Conn_01x01_Male | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm | J4, J6, J8, J10, J11, J12, J13 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 22 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5, R6 |
| 3 | Conn_01x02 | Connector_Phoenix_MC:PhoenixContact_MCV_1,5_2-G-3.81_1x02_P3.81mm_Vertical | J1, J2, J3 |
| 3 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J20, J21, J22 |
| 3 | Conn_01x08 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J17, J18, J19 |
| 2 | Conn_01x24 | Connector_PinHeader_2.54mm:PinHeader_1x24_P2.54mm_Vertical | J14, J15 |
| 2 | con | Connector_Wire:SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm | J5, J7 |
| 1 | 0.1uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C4 |
| 1 | 0F | Capacitor_THT:C_Axial_L5.1mm_D3.1mm_P12.50mm_Horizontal | C1 |
| 1 | 10nF C0G | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R3 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal | R1 |
| 1 | 1k RTD | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical | R2 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 47uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C6 |
| 1 | Barrel_Jack_Switch_Pin3Ring | Connector_BarrelJack:BarrelJack_Horizontal | J16 |
| 1 | PCap04 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | Polyfuse 500mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | RJ45_LED | Connector_RJ:RJ45_Cetus_J1B1211CCD_Horizontal | J9 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | Teensy4.1 | Teensy:Teensy41 | U2 |

newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels





jerry20091103/Teensy_Grovebox
A portable synth and music multi-tool made with Teensy 4.1

FundamentalFrequency/LMN-3-ECAD
Electrical CAD Files for the LMN-3 Project

DRWJSCHMIDT/T41
This is the repository for the officially released V10, V11, and V12 versions of the T41 Software Defined Transceiver hardware and kits.
It measures 77.5 × 63.5 mm and has 2 copper layers, 1.6 mm thick.
42 parts, built around the TEENSY 4.1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bungernut/TeensyPicoCap repository on GitHub, at the commit this page was made from: the board is PCB/TeensyPicoCap4/TeensyPicoCap4.kicad_pcb and its schematic PCB/TeensyPicoCap4/TeensyPicoCap4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bungernut before reusing the design.