2 layers185.4 × 109 mm
2 layers69 × 58.7 mm
Remote
bullestock/remote1- Size
- 69 × 58.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 68
- Pads
- 198
- Tracks, vias
- 411, 116
- Pours
- 49
- Routed
- Yes
- KiCad
- KiCad 8.99 (file 20241010)
- Created
- 13 Jul 2017
- Updated
- 6 Sep 2026
Overview
Remote is an open-source printed circuit board by bullestock, from the bullestock/remote repository on GitHub. It is a 2-layer board of 69 × 58.7 mm with 40 parts on 68 nets, routed with 411 tracks and 116 vias.
It is built around the ESP32-WROOM-32U, ADS7828E and 74HC165D, with the AMS1117-3.3 and MMBT3904 among its other parts. Its parts include 10 resistors, 9 capacitors, 7 connectors, 5 ICs and 2 transistors. It belongs with the ESP32 boards of this library.
Main components
5
ESP32-WROOM-32U
SMD,19.2x18mm-40℃~+85℃ -97dBm 2.4GHz 20.5dBm 3V~3.6V Bluetooth4.2 ESP32-DOWD UART、SDIO、SPI、I2C、GPIO、PWM、ADC、DAC、CAN SMD,19.2x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
ADS7828E
TSSOP1612-Bit, 8-Channel Sampling Analog-To-Digital Converter with I2C™ InterfaceTexas InstrumentsUncategorised
74HC165D
SO-16-40℃~+125℃ 1 28ns@6V,50pF 2V~6V 35MHz 500mW 74HC 8 Parallel or Serial to Serial SOIC-16 Shift Registers ROHSNexperiaShift Registers
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_0603_1608Metric | C4, C6, C7, C10 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric | C1, C3, C5 |
| 2 | 0R | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 100k | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 74HC165 | Package_SO:SOP-16_3.9x9.9mm_P1.27mm | U1, U2 |
| 2 | Conn_01x08 | Connector_JST:JST_XH_B08B-XH-A_1x08_P2.50mm_Vertical | J4, J5 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | N/M | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | SW_SPST | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1, SW2 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 1k2 | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 220u/16V | Capacitor_SMD:CP_Elec_10x10.5 | C8 |
| 1 | 2k2 | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | ADS7828 | Package_SO:TSSOP-16_4.4x5mm_P0.65mm | U4 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U7 |
| 1 | Conn_01x02 | Connector_JST:JST_XH_B02B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | Conn_01x07 | Connector_JST:JST_XH_B07B-XH-A_1x07_P2.50mm_Vertical | J3 |
| 1 | Debug | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | ESP32-WROOM-32U | RF_Module:ESP32-WROOM-32U | U5 |
| 1 | Jumper | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | MC130VX | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J7 |
| 1 | TestPoint | TestPoint:TestPoint_Keystone_5000-5004_Miniature | TP1 |
Questions
How big is the Remote PCB?
It measures 69 × 58.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Remote use?
40 parts, built around the ESP32-WROOM-32U, ADS7828E, 74HC165D and AMS1117-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Remote KiCad files?
From the bullestock/remote repository on GitHub, at the commit this page was made from: the board is controller/remote.kicad_pcb and its schematic controller/esp32.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Remote design in my own project?
Its repository states no licence, so its author keeps all rights: ask bullestock before reusing the design.
More from bullestock/remote
2- 2 layers49.7 × 83.3 mm
Similar boards
- 4 layers46 × 72 mm
Bosch kf163-control
robinolejnik/bosch-kf163-control
Replacement PLL PCB for Bosch KF83/KF163/KF453 radios
132 partsMIT - 2 layers129.6 × 89.8 mm
PowerMeter REV36
dj1yr/LJ-RF-Powermeter-Teensy-4.1
Here is a collection of files for the RF Powermeter with Teensy 4.0/4.1. Since I could not find any source files for the PCB, I designed two boards based on Robert Entwistle (WA2T) and the really impressive software by…
75 parts - 2 layers43.9 × 44.5 mm
- 2 layers100 × 80 mm
InSomnia
kaorii-ako/inSomnia
Adaptive, context-aware wake clock — wakes you while you're already stirring, stays quiet if you're already up. ESP32-S3 + thermal array.
53 parts1 - 2 layers190.6 × 87 mm
- 2 layers230 × 160 mm
- 2 layers60 × 64 mm
Blueaudio puck
Zektopic/esp32-blue-audio-puck
Turn wired headphones wireless: an ESP32 Bluetooth audio receiver (A2DP sink) with I2S DAC output, parametric EQ, AVRCP remote control and battery-aware power management. Built on ESP-IDF v5.5.
50 parts1MIT - 2 layers39.1 × 68.9 mm
BaseChipOnly
ZonatedCord/Yggdrasill
Smart LED plant pot — ESP32 PCB, WS2812B/SK6812 LEDs, WLED firmware, modular 3D-printed vase, and a native iOS app with Apple's Liquid Glass design.
34 parts1