2 layers94 × 57 mm
2 layers38.1 × 43.2 mm
Addon
bullestock/chillerLasersaur chiller
- Size
- 38.1 × 43.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 12
- Nets
- 10
- Pads
- 28
- Tracks, vias
- 39, 22
- Routed
- Yes
- KiCad
- KiCad 7 (file 20230606)
- Created
- 1 Sep 2015
- Updated
- 20 May 2024
Overview
Addon is an open-source printed circuit board by bullestock, from the bullestock/chiller repository on GitHub. It is a 2-layer board of 38.1 × 43.2 mm with 12 parts on 10 nets, routed with 39 tracks and 22 vias.
It is built around the BC547 and IRFZ44N. Its parts include 5 connectors, 3 resistors, 2 diodes and 2 transistors.
Main components
2Parts
12| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 12V in | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J1 |
| 1 | 1N4004 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
| 1 | 2k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q1 |
| 1 | Buzzer | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | Ext | Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J4 |
| 1 | Fan control | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | Fan out | Connector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | IRFZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q2 |
More from bullestock/chiller
1Similar boards
- 2 layers63.2 × 54.4 mm
Mosfet fan switch
kavehs87/nuc-fan-controller
KiCad 10 board: 19V->12V buck for two 2-pin 12V fans, 12V->5V->3.3V for a 3.3V Pro Mini, follows the NUC ITE's PWM duty, and simulates the tach signal. ERC/DRC clean.
28 parts - 2 layers149.9 × 100.3 mm
- 2 layers89.4 × 83.2 mm
- 2 layers153.5 × 125.2 mm
- 2 layers91.4 × 71.1 mm
Pico w rover
NikodemBartnik/Mini-Mars-Rover
Educational robotic platform made to look like a mini mars rover
20 parts143MIT - 2 layers54.6 × 85.1 mm
- 2 layers97.8 × 66 mm
Pico Watering System
NikodemBartnik/Pico-Watering-System
Raspberry Pi Pico based automated watering system for your garden
33 parts59MIT - 4 layers262 × 110.5 mm
HM CENTRAL-02 painel
BenjamimKrug/robo_humanoide
Repositorio para arquivos gerais necessários para o desenvolvimento do Robô humanoide
303 parts10
Questions
How big is the Addon PCB?
It measures 38.1 × 43.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Addon use?
12 parts, built around the BC547 and IRFZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Addon KiCad files?
From the bullestock/chiller repository on GitHub, at the commit this page was made from: the board is pcb/addon/addon.kicad_pcb and its schematic pcb/addon/addon.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Addon design in my own project?
Its repository states no licence, so its author keeps all rights: ask bullestock before reusing the design.