2 layers42.9 × 70.5 mm
Lightningtrigger
kanestoboi/lightningtrigger
A lightning detection tool for high-speed DSLR photography
72 parts1
2 layers80 × 100 mm
Camera trigger using PIR sensor
- Size
- 80 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 137
- Nets
- 100
- Pads
- 373
- Tracks, vias
- 955, 84
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 3 Feb 2018
- Updated
- 28 Mar 2018
Overview
Pir is an open-source printed circuit board by buha, from the buha/pir-trigger repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 80 × 100 mm with 137 parts on 100 nets, routed with 955 tracks and 84 vias.
It is built around the IRA-S210ST01, MAX44009EDT+T and EL817-S1, with the MBR0530, RE1C002UN-TP and 1N4148X-TP among its other parts. Its parts include 41 capacitors, 34 resistors, 8 diodes, 7 ICs and 5 switches. It belongs with the radio and wireless boards and the STM32 boards of this library.
Main components
9
IRA-S210ST01
插件-40℃~+70℃ 2V~15V 插件 Ambient Light Sensors ROHSMurataAmbient Light Sensors
MAX44009EDT+T
DFN-6-EP(2x2)Low power/sleep mode、Spectral correction/filtering、High dynamic range measurement、Interrupt/event trigger、Automatic gain control DFN-6-EP(2x2) Ambient Light Sensors ROHSMaxim Integrated (Analog Devices)Ambient Light Sensors
EL817-S1
SMD-4SMD-4 New Arrivals ROHSEverlight ElectronicsUncategorised
MBR0530
SOD-1231 Independent 30V 5.5A 500mA 550mV@500mA 80uA@30V SOD-123 Schottky Diodes ROHSJiangsu Changjing Electronics Technology (CJ)Schottky Diodes
RE1C002UN-TP
SOT-5231 N-channel 120pF 15pF 20V 20pF 250mΩ@4.5V、300mΩ@2.5V 280mW 750mV 800mA SOT-523 MOSFETs ROHSTECH PUBLICMOSFETs
1N4148X-TP
SOD-523-65℃~+150℃ 1 Independent 1.25V@150mA 150mA 1uA@75V 200mW 2A 4ns 75V SOD-523 Switching Diodes ROHSMicro Commercial ComponentsSwitching DiodesIML-0688
SMD-25℃~+60℃ SMD LED Indication - Discrete ROHSMurataLED Indication - Discrete
SI2323DS
SOT-23-3-55℃~+150℃ 1 P-Channel 1.7W 190pF 20V 290pF 39mΩ@4.5V、58mΩ@2.5V 4.1A 450mV 7.8nC@4.5V 740pF SOT-23-3 MOSFETs ROHSTECH PUBLICMOSFETs
SJ-2523-SMT-TR
SMD-25℃~+85℃ 12V 1A 2.5mm Headphone Jack Brass、Copper alloy Silver SMD Audio Connectors ROHSCUIAudio Connectors (Headphones)
README
README.mdpir-trigger
Camera trigger using PIR sensor
Specifications
- 2.7" Eink screen
- PIR sensor
- Light sensor
- Camera focus and shutter control (any camera with 2.5mm native or adapted cable release)
- 5 way navigational buttons
- >1 year on a 3V CR2477
- Weatherproof
Parts
137| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | TEST | Measurement_Points:Measurement_Point_Round-TH_Small | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10, TP23, TP29, TP30, TP37, TP38 |
| 10 | 10k | Resistors_SMD:R_1206 | R2, R3, R4, R15, R16, R19, R20, R22, R24, R26 |
| 8 | 1uF | Capacitors_SMD:C_1206 | C22, C23, C25, C26, C27, C29, C30, C32 |
| 7 | 100nF | Capacitors_SMD:C_1206 | C18, C21, C24, C28, C34, C38, C40 |
| 7 | MBR0530 | MBR0530:SOD3716X135N | D2, D3, D4, D5, D6, D7, D8 |
| 7 | TEST | Measurement_Points:Measurement_Point_Round-SMD-Pad_Small | TP11, TP12, TP13, TP15, TP16, TP17, TP18 |
| 6 | 150 | Resistors_SMD:R_1206 | R12, R13, R28, R29, R30, R34 |
| 5 | 100k | Resistors_SMD:R_1206 | R14, R18, R21, R23, R25 |
| 5 | SW_DPST-KSC931 | KSC931J_LFS:KSC8(J) | SW1, SW2, SW3, SW4, SW5 |
| 4 | 12pF | Capacitors_SMD:C_1206 | C35, C36, C37, C39 |
| 4 | EL817S | EL817S:EL817S | IC3, IC4, IC7, IC8 |
| 3 | Jumper | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | JP1, JP2, JP4 |
| 2 | 0.01μF | Capacitors_SMD:C_1206 | C5, C17 |
| 2 | 0.1μF | Capacitors_SMD:C_1206 | C4, C16 |
| 2 | 100n | Capacitors_SMD:C_1206 | C20, C33 |
| 2 | 10μF | Capacitors_SMD:C_1206 | C2, C14 |
| 2 | 13k | Resistors_SMD:R_1206 | R5, R8 |
| 2 | 1M | Resistors_SMD:R_1206 | R9, R10 |
| 2 | 1μF | Capacitors_SMD:C_1206 | C3, C15 |
| 2 | 32 Mhz | Crystals:Crystal_SMD_2012-2pin_2.0x1.2mm_HandSoldering | Y1, Y2 |
| 2 | 4.7uF | Capacitors_SMD:C_1206 | C19, C31 |
| 2 | 47nF | Capacitors_SMD:C_1206 | C9, C12 |
| 2 | RE1C002UN | RE1C002UNTCL:SOT50P160X85-3N | Q2, Q3 |
| 1 | 0 | Resistors_SMD:R_1206 | R1 |
| 1 | 0.1uF | Capacitors_SMD:C_1206 | C41 |
| 1 | 0.47 | Resistors_SMD:R_1206 | R17 |
| 1 | 1000pF | Capacitors_SMD:C_1206 | C6 |
| 1 | 100pF | Capacitors_SMD:C_1206 | C7 |
| 1 | 100u | Capacitors_SMD:CP_Elec_5x5.3 | C13 |
| 1 | 100μF | Capacitors_SMD:C_1206 | C1 |
| 1 | 1K | Resistors_SMD:R_1206 | R27 |
| 1 | 1N4148X-TP | Diodes_SMD:D_SOD-123 | D1 |
| 1 | 2.2k | Resistors_SMD:R_1206 | R33 |
| 1 | 2.9k | Resistors_SMD:R_1206 | R32 |
| 1 | 22uF | Capacitors_SMD:C_1206 | C11 |
| 1 | 22μF | Capacitors_SMD:C_1206 | C8 |
| 1 | 3.3K | Resistors_SMD:R_1206 | R11 |
| 1 | 3.3nF | Capacitors_SMD:C_1206 | C10 |
| 1 | 36k | Resistors_SMD:R_1206 | R31 |
| 1 | 56k | Resistors_SMD:R_1206 | R6 |
| 1 | 680k | Resistors_SMD:R_1206 | R7 |
| 1 | 68uH | Inductors_SMD:L_1206 | L1 |
| 1 | CR2477 3V Battery | Battery_Holders:Keystone_105_1x2430-CoinCell | BT1 |
| 1 | GDEW027W3 | FH12A-24S-0.5SH(55):FH12A-24S-0.5SH | J2 |
| 1 | IML-0688 | Murata-Fresnel:IML-0688 | MK1 |
| 1 | IRA-S210ST01 | IRA-S210ST01:IRA-S210ST01 | IC2 |
| 1 | Jumper_NC_Dual | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | JP3 |
| 1 | MAX44009EDT+T | MAX44009EDT+T:SON65P200X200X65-7N | IC1 |
| 1 | SI2323DS | SI2323DS-T1-E3:SOT95P237X112-3N | Q1 |
| 1 | SJ-2523-SMT-TR | SJ-2523-SMT-TR:SJ-2523-SMT-TR | J1 |
| 1 | STM32L476RETx | Housings_QFP:LQFP-64_10x10mm_Pitch0.5mm | U1 |
| 1 | SWD | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | J3 |
| 1 | UART | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | J4 |
The 133 most common of 137 parts.
Questions
How big is the Pir PCB?
It measures 80 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pir use?
137 parts, built around the IRA-S210ST01, MAX44009EDT+T, EL817-S1 and MBR0530. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pir KiCad files?
From the buha/pir-trigger repository on GitHub, at the commit this page was made from: the board is pcb/pir.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pir design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers95 × 72 mm
Smart Bike Light Grp07 V03
Emwm/BikeLightIoT7
An ESP32-based smart tracking and monitoring system for bicycles, combining GNSS (GPS) tracking, motion detection, power management, battery monitoring, and LoRa communication to create an intelligent, low-power system…
23 parts - 2 layers67 × 54.5 mm
- 2 layers75 × 64 mm
ESP24V HA XIAO
Traxes/dimplex-zl400-esphome
ESPHome controller for Dimplex ZL 300/400 VF ventilation units – isolated 24 V I/O, XIAO ESP32-C6, KiCad PCB, 3D-printed case. | ESPHome-Steuerung für Dimplex-Lüftungsgeräte ZL 300/400 VF mit Home Assistant.
47 partsMIT - 2 layers60.5 × 65.5 mm
- 4 layers180.4 × 157.2 mm
- 4 layers95.4 × 36.2 mm
- 6 layers95.4 × 36.1 mm
