Skip to the content
2 layers20.5 × 19 mmTracksensor, the printed circuit board in 3D

RP2040 RR Crossing signal controller

Size
20.5 × 19 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
32
Pads
72
Tracks, vias
106, 32
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 Jan 2024
Updated
27 Feb 2025

Overview

Tracksensor is an open-source printed circuit board by buelowp, from the buelowp/rrcrossing repository on GitHub. It is a 2-layer board of 20.5 × 19 mm with 40 parts on 32 nets, routed with 106 tracks and 32 vias.

Its parts include 8 resistors and 8 ICs.

README

README.md

In track IR sensor for realistic crossing signals

This is a HW project based on a RPi Pico which will monitor 4 track sensors to determine which way a train is going, and then operate flashers and gates for one crossing. This actually works really well so far. But it needs more testing.

See a video in action at

Parts

40
QtyValueFootprintReferences
8100ΩPCM_JLCPCB:R_0402R1, R2, R3, R4, R5, R6, R7, R8
8GNDTestPoint:TestPoint_Pad_1.5x1.5mmH3, H6, H9, H12, H15, H18, H21, H24
8IOTestPoint:TestPoint_Pad_1.5x1.5mmH1, H4, H7, H10, H13, H16, H19, H22
8VCCTestPoint:TestPoint_Pad_1.5x1.5mmH2, H5, H8, H11, H14, H17, H20, H23
8~Personal:OPTO-SMD-4_ITR1204SR10AU1, U2, U3, U4, U5, U6, U7, U8

More from buelowp/rrcrossing

1
  • 2 layers60.3 × 49.5 mmXing Signals XIAO, the printed circuit board in 3D

    Xing Signals XIAO

    buelowp/rrcrossing

    RP2040 RR Crossing signal controller

    51 parts

Similar boards

  • 2 layers139.7 × 73.7 mm134pin 7-967288-1, the printed circuit board in 3D

    134pin 7-967288-1

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    40 parts1.2k
  • 2 layers149.4 × 177.4 mmLightsculpture, the printed circuit board in 3D

    Lightsculpture

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    40 parts915
  • 2 layers150 × 50 mmEleLab v2 Bus150, the printed circuit board in 3D

    EleLab v2 Bus150

    Chrismettal/EleLab_v2

    Cheap DIY lab system for hobbyists and the tinkering folk

    40 parts531GPL-3.0
  • 2 layers66.4 × 48.1 mmRaspberry, the printed circuit board in 3D

    Raspberry

    Chrismettal/flipper-zero-backpacks

    Backpack-style addon boards for the Flipper Zero!

    40 parts456
  • 2 layers44 × 44 mmTrackball, the printed circuit board in 3D

    Trackball

    jfedor2/rp2040-pmw3360

    RP2040+PMW3360 PCB and code

    40 parts432
  • 2 layers90.8 × 53.3 mmABSIS Bus Master, the printed circuit board in 3D

    ABSIS Bus Master

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    40 parts431
  • 2 layers59.6 × 109.5 mmDrop, the printed circuit board in 3D

    Drop

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    40 parts410
  • 2 layers123.8 × 73.5 mmAttic, the printed circuit board in 3D

    Attic

    simondlevy/Hackflight

    Minimalist flight-control toolkit for makers

    40 parts334GPL-3.0

Questions

How big is the Tracksensor PCB?

It measures 20.5 × 19 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Tracksensor use?

40 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Tracksensor KiCad files?

From the buelowp/rrcrossing repository on GitHub, at the commit this page was made from: the board is eda/sensor/tracksensor.kicad_pcb and its schematic eda/monitor/Xing Signals XIAO.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Tracksensor design in my own project?

Its repository states no licence, so its author keeps all rights: ask buelowp before reusing the design.