
Front PCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.

Custom-built controller for an RC car project, designed from scratch to explore embedded hardware and firmware.
Rc pad is an open-source printed circuit board by bszyca, from the bszyca/hw_rc_car_pad repository on GitHub. It is a 4-layer board of 149.5 × 66 mm with 87 parts on 63 nets, routed with 487 tracks and 73 vias.
It is built around the LP3985IM5-3.3. Its parts include 29 resistors, 23 capacitors, 9 switches, 3 ICs and 3 connectors. It belongs with the STM32 boards of this library.
Custom-built controller for an RC car project, designed from scratch to explore embedded hardware and firmware.
This project started as a way to:
The long-term goal is to build both:
This repository focuses on the controller pad.
The controller is built around:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 100n | Capacitor_SMD:C_0805_2012Metric | C3, C4, C5, C6, C7, C10, C11, C12, C13, C14, C15, C16, C17, C18 |
| 10 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R5, R6, R11, R12, R13, R14, R15 |
| 10 | 22 | Resistor_SMD:R_0805_2012Metric | R16, R17, R18, R19, R20, R27, R28, R29, R30, R31 |
| 9 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 6 | TestPoint | TestPoint:TestPoint_Pad_1.5x1.5mm | TP1, TP2, TP3, TP4, TP5, TP6 |
| 4 | 0 | Resistor_SMD:R_0805_2012Metric | R7, R8, R9, R10 |
| 4 | 10n | Capacitor_SMD:C_0603_1608Metric | C9, C21, C22, C23 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 4,7u | Capacitor_SMD:C_0805_2012Metric | C8, C19, C20 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R23, R24 |
| 2 | LOGO | logo:two_stars | G***, G*** |
| 2 | R_Potentiometer_Dual | Joystick:Joystick | RV1, RV2 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 2,2k | Resistor_SMD:R_0805_2012Metric | R22 |
| 1 | 4,7k | Resistor_SMD:R_0805_2012Metric | R21 |
| 1 | Battery Connector | Connector_JST:JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J1 |
| 1 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J2 |
| 1 | LED PWR BLUE | LED_THT:LED_D3.0mm | D1 |
| 1 | LED RED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | LOGO | logo:pad | G*** |
| 1 | LOGO | logo:double_stars | G*** |
| 1 | LOGO | logo:logo | G*** |
| 1 | LOGO | logo:stars | G*** |
| 1 | LP3985IM5-3.3 | LP3985IM5-3.3:SOT95P280X145-5N | U1 |
| 1 | NRF24L01_Breakout | RF_Module:nRF24L01_Breakout | U3 |
| 1 | OLED | SSD1306-mounting-holes:Display_128x64_096_I2C | J5 |
| 1 | STM32G0C1CETxN | Package_QFP:LQFP-48_7x7mm_P0.5mm | U4 |

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.

jibrilsharafi/EnergyMe-Home
Smart energy meter capable of monitoring up to 16 channels. Supports MQTT, REST API, Modbus TCP, InfluxDB, AWS IoT Core. Friendly UI and fully open source (PCB, schematics, components, source code)

bmurmann/EE628
EE 628: Analysis and Design of Integrated Circuits (University of Hawaiʻi at Mānoa)


jlcjak/frameoscope
oscilloscope expansion card / module for framework laptops

VIPQualityPost/lemon-pepper-stepper
simplefoc all-in-one 50W hybrid stepper + bldc driver

/Solar-Panel-Y-.kicad_pcb.jpg?size=s&soon)
AFS-pt/PROMETHEUS-1
Documentation lives here: https://afs-pt.github.io/PROMETHEUS-1
It measures 149.5 × 66 mm and has 4 copper layers, 1.6 mm thick.
87 parts, built around the LP3985IM5-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bszyca/hw_rc_car_pad repository on GitHub, at the commit this page was made from: the board is rc_pad.kicad_pcb and its schematic rc_pad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bszyca before reusing the design.