Skip to the content
2 layers24.3 × 14.5 mmAdc Adapter, the printed circuit board in 3D
Size
24.3 × 14.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
18
Pads
55
Tracks, vias
102, 4
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
27 Jul 2023
Updated
30 Aug 2025

Overview

Adc Adapter is an open-source printed circuit board by bryanbendall, from the bryanbendall/Brytec_PowerModuleRev5 repository on GitHub. It is a 2-layer board of 24.3 × 14.5 mm with 22 parts on 18 nets, routed with 102 tracks and 4 vias.

It is built around the LM324DT. Its parts include 12 resistors, 8 capacitors, 1 IC and 1 connector. It belongs with the interfaces and adapters boards of this library.

Main components

1

Parts

22
QtyValueFootprintReferences
4120Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR9, R10, R11, R12
4220pFCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC5, C6, C7, C8
44.7KResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5, R6, R7, R8
4C_SmallMyKiCadLibraries:C_0603_1608Metric_AdaptorC1, C2, C3, C4
4R_SmallMyKiCadLibraries:C_0603_1608Metric_AdaptorR1, R2, R3, R4
1Conn_01x01_PinConnector_PinHeader_2.00mm:PinHeader_1x01_P2.00mm_VerticalJ1
1LM324DTdigikey-footprints:SOIC-14_W3.9mmU1

More from bryanbendall/Brytec_PowerModuleRev5

1

Similar boards

  • 4 layers127 × 165 mmECU, the printed circuit board in 3D

    ECU

    lflaherty/ev-ecu

    Custom ECU (firmware and hardware) for Bespoke Electric Vehicles

    258 parts13Apache-2.0
  • 2 layers121 × 75.5 mmJlctest, the printed circuit board in 3D

    Jlctest

    cjheath/jlcbasic

    JLC Basic parts library for Kicad fetched and converted from EasyEDA

    46 parts5
  • 4 layers42.8 × 67.5 mmPCB Interface, the printed circuit board in 3D

    PCB Interface

    Domfunkle/NHP_Synth

    This project implements a dual-channel Direct Digital Synthesis (DDS) signal generator on the ESP32 platform. It features:

    80 parts
  • 2 layers80 × 29 mmSmoke extractorV1 1, the printed circuit board in 3D

    Smoke extractorV1 1

    nguterresn/smoke-extractor

    On CustomSymbols - Project based symbols.

    57 parts
  • 4 layers64.3 × 100 mmDrum trigger, the printed circuit board in 3D

    Drum trigger

    nullcrimson/piezo-conditioner

    220 parts
  • 4 layers222.3 × 146 mmKarca, the printed circuit board in 3D

    Karca

    rice-eclipse/karca

    arca but this time with a k

    243 partsCC-BY-SA-4.0
  • 2 layersBias controller, the printed circuit board in 3D

    Bias controller

    loxodes/vna

    Under development open hardware microwave vector network analyzer

    203 parts205

Questions

How big is the Adc Adapter PCB?

It measures 24.3 × 14.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Adc Adapter use?

22 parts, built around the LM324DT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Adc Adapter KiCad files?

From the bryanbendall/Brytec_PowerModuleRev5 repository on GitHub, at the commit this page was made from: the board is Board/Adc Adapter/Adc Adapter.kicad_pcb and its schematic Board/Adc Adapter/Adc Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Adc Adapter design in my own project?

Its repository states no licence, so its author keeps all rights: ask bryanbendall before reusing the design.