
Datalogger esp8266 PANELIZED
BrunoRicci/DataloggerDHT22
Temperature and humidity datalogger telemetry device for CONICET agrarial research purposes.

Temperature and humidity datalogger telemetry device for CONICET agrarial research purposes.
Sensor PCB is an open-source printed circuit board by BrunoRicci, from the BrunoRicci/DataloggerDHT22 repository on GitHub. It is a 2-layer board of 15.3 × 40 mm with 7 parts on 5 nets, routed with 25 tracks and 0 vias.
It is built around the DHT22. Its parts include 2 resistors, 1 capacitor, 1 IC and 1 connector. It belongs with the sensors and measurement boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 100 | Resistors_SMD:R_0805 | R1 |
| 1 | 10k | Resistors_SMD:R_0805 | R2 |
| 1 | 10uFx6v3 | Capacitors_THT:CP_Radial_D4.0mm_P2.00mm | C1 |
| 1 | DHT22 | Connectors_Molex:Molex_KK-6410-03_03x2.54mm_Straight | J1 |
| 1 | DHT22 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | U1 |
| 1 | e | Mounting_Holes:MountingHole_3.2mm_M3_DIN965_Pad | e |
The 6 most common of 7 parts.

BrunoRicci/DataloggerDHT22
Temperature and humidity datalogger telemetry device for CONICET agrarial research purposes.

BrunoRicci/DataloggerDHT22
Temperature and humidity datalogger telemetry device for CONICET agrarial research purposes.

BrunoRicci/DataloggerDHT22
Temperature and humidity datalogger telemetry device for CONICET agrarial research purposes.

BrunoRicci/DataloggerDHT22
Temperature and humidity datalogger telemetry device for CONICET agrarial research purposes.

Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)

mcbittech/souliss-smart-thermostat-WiFi
ESP8266 WiFi Smart Thermostat based on Souliss IoT Framework

justinmklam/iot-sourdough-starter-monitor
Tracking the fermentation of sourdough starter over the cloud.

MakersAsylumIndia/M19O2
M19O2 open source hardware Oxygen Concentrator based on the Pressure Swing Adsorption cycle aka Skarstorm cycle

kbx81/ClimateSprinklerController
ESP32-based climate and sprinkler controller for use with ESPHome

felixwittwer/homeassistant_automaic_greenhouse
A cool Project to make your greenhouse smart. What about automaic irrigation and collecting enviromental data right from your garden.

AnaviTechnology/anavi-thermometer
WiFi Smart Thermometer with ESP8266, DHT22, DS18B20, OLED display and slots for up to 3 I2C sensor modules

Finomnis/AirQualitySensor
Simple Air Quality sensor based on nRF52840, Zigbee, AM2302/DHT22 and Senseair S8
It measures 15.3 × 40 mm and has 2 copper layers, 1.6 mm thick.
7 parts, built around the DHT22. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the BrunoRicci/DataloggerDHT22 repository on GitHub, at the commit this page was made from: the board is Hardware/Datalogger_esp8266/Sensor_PCB/Sensor_PCB/Sensor_PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask BrunoRicci before reusing the design.