

CMU - Current Measurement Unit
repository for mk11's DAQ current meter PCB
- Size
- 55.3 × 79.8 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 50
- Pads
- 173
- Tracks, vias
- 213, 61
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Dec 2025
- Updated
- 9 Feb 2026
Overview
CMU - Current Measurement Unit is an open-source printed circuit board by bruinformula, from the bruinformula/mk11-daq-nmp-currentmeter repository on GitHub. It is a 4-layer board of 55.3 × 79.8 mm with 39 parts on 50 nets, routed with 213 tracks and 61 vias.
It is built around the TPS5430DDAR, B340 and BAT54A, with the PRTR5V0U2X among its other parts. Its parts include 14 capacitors, 10 resistors, 3 diodes, 3 connectors and 2 ICs. It belongs with the sensors and measurement boards of this library.
Main components
4TPS5430DDAR
SOIC-8-EP-40℃~+125℃@(TJ) 1 1.221V~32.04V 3A 4.4mA 5.5V~36V 500kHz Adjustable Buck Buck Built-in No SOIC-8-EP DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersB340
SMC(DO-214AB)-55℃~+150℃ 1 Independent 100A 3A 40V 500mV@3A 500uA@40V SMC(DO-214AB) Schottky Diodes ROHSDiodes IncorporatedSchottky DiodesBAT54A
SOT-231 Pair Common Anode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky DiodesPRTR5V0U2X
SOT-143-55℃~+125℃ 0.3pF、0.8pF 100W 10V、15V 5V 6.5V 6A 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C301, C302, C303, C304 |
| 3 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R202, R203, R601 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C201, C202 |
| 2 | 22u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C501, C502 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R401, R402 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C602 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C601 |
| 1 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C306 |
| 1 | 12k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R201 |
| 1 | 15u | bfr_inductors:CDRH104RNP-150NC | L601 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C305 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R206 |
| 1 | 220u | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C603 |
| 1 | 24k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R205 |
| 1 | 3.3k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R602 |
| 1 | 4.7u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C307 |
| 1 | 8.2k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R204 |
| 1 | B340 | Diode_SMD:D_SMC | D601 |
| 1 | BAT54A | Package_TO_SOT_SMD:SOT-23 | D201 |
| 1 | CANH | bfr_utilities:TestPoint_Keystone_5019_Miniature | TP301 |
| 1 | CANL | bfr_utilities:TestPoint_Keystone_5019_Miniature | TP302 |
| 1 | Connector | Connector_Molex:Molex_Micro-Fit_3.0_43650-0400_1x04_P3.00mm_Horizontal | J501 |
| 1 | I2C OLED Display Connector | Connector_Molex:Molex_Micro-Fit_3.0_43650-0400_1x04_P3.00mm_Horizontal | J401 |
| 1 | Krill | bfr_connectors:TE_1-2199119-5 | MCU301 |
| 1 | LOGO | bfr_logos:BFR_Small | G*** |
| 1 | LOGO | images:gudetama | G*** |
| 1 | MCP6002-xSN | Package_SO:SOIC-8_5.3x6.2mm_P1.27mm | U201 |
| 1 | PRTR5V0U2X | Package_TO_SOT_SMD:SOT-143 | D202 |
| 1 | SMD Test Point | bfr_utilities:TestPoint_Keystone_5019_Miniature | TP201 |
| 1 | Sensor Connector | Connector_Molex:Molex_Micro-Fit_3.0_43650-0400_1x04_P3.00mm_Horizontal | J702 |
| 1 | TPS5430DDAR | Package_SO:TI_SO-PowerPAD-8 | U601 |
Similar boards
- 4 layers100 × 68 mm

- 2 layers140 × 90 mm

- 2 layers92.5 × 62.5 mm

DropGenPCB
harrislab-brown/DropGen
DropGen uses a fluid reservoir and a piezoelectric buzzer to precisely and repeatably dispense small droplets on demand.
25 parts12CC-BY-SA-4.0 - 2 layers121 × 75.5 mm

Jlctest
cjheath/jlcbasic
JLC Basic parts library for Kicad fetched and converted from EasyEDA
46 parts5 - 2 layers18.5 × 32.5 mm

- 2 layers90 × 90 mm

PocketPSU elec main
jarrod89/pocketPSU
Input1: - Output1 can be used to supply pocketPSU via a battery - Optional battery charging capability (addon board with BMS)
97 parts2 - 4 layers70 × 80 mm

Neptune toolboard
LoicGRENON/Neptune_toolboard
a CAN bus toolboard designed to be used for 3D printing and SMD pick and place using Klipper
114 parts2GPL-3.0 - 2 layers45.3 × 56.3 mm

Abb welcome gateway v3
fquinto/abb-welcome-gateway
ESP32 gateway for ABB‑Welcome / Busch‑Welcome 2‑wire intercoms. Doorbell notifications + remote door control in Home Assistant. Includes PCB design and firmware.
69 parts1CERN-OHL-W-2.0
Questions
How big is the CMU - Current Measurement Unit PCB?
It measures 55.3 × 79.8 mm and has 4 copper layers, 1.6 mm thick.
What parts does the CMU - Current Measurement Unit use?
39 parts, built around the TPS5430DDAR, B340, BAT54A and PRTR5V0U2X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CMU - Current Measurement Unit KiCad files?
From the bruinformula/mk11-daq-nmp-currentmeter repository on GitHub, at the commit this page was made from: the board is Current Meter V1/CMU - Current Measurement Unit.kicad_pcb and its schematic Current Meter V1/CMU - Current Measurement Unit.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CMU - Current Measurement Unit design in my own project?
Its repository states no licence, so its author keeps all rights: ask bruinformula before reusing the design.