Skip to the content
2 layers25 × 70 mmBpf-1, the printed circuit board in 3D

This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.

Size
25 × 70 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
18
Pads
70
Tracks, vias
97, 20
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
3 Jan 2025
Updated
2 Jun 2025

Overview

Bpf-1 is an open-source printed circuit board by brucemack, from the brucemack/sdr2 repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 25 × 70 mm with 31 parts on 18 nets, routed with 97 tracks and 20 vias.

It is built around the SN74CBT3253D. Its parts include 15 capacitors, 4 inductors, 3 connectors and 1 IC.

Main components

1

README

README.md

Overview

This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.

System Picture

Build/Debug Commands

One-time setup of make process:

text
    git submodule update --init
    mkdir build
    cd build
    cmake -DPICO_BOARD=pico2 ..

Command used to flash code to board:

text
    ~/git/openocd/src/openocd -s ~/git/openocd/tcl -f interface/cmsis-dap.cfg -f target/rp2350.cfg -c "adapter speed 5000" -c "rp2350.dap.core1 cortex_m reset_config sysresetreq" -c "program main.elf verify reset exit"

Pico 2 Pinout Notes

text
GP0  - (Reserved for UART0 TX)
GP1  - (Reserved for UART0 RX)

GP2  - 
GP3  - 
GP4  - I2S SCK out to PCM1804 ADC and PCM5100 DAC
GP5  - RST out to PCM1804 ADC

GP6  - I2S DIN in from PC1804 ADC
GP7  - I2S BCK out to PC1804 ADC
GP8  - I2S LRCK out to PC1804 ADC
GP9  - I2S DOUT out to PCM5100 DAC

GP10 - I2S BCK out to PCM5100 DAC
GP11 - I2S LRCK out to PCM5100 DAC
GP12 - User button input 0
GP13 - User button input 1
GP14 - PTT input 
GP15 - 
GP16 - I2C0 SDA for Si5351 (Addr 0x60)
GP17 - I2C0 SCL for Si5351 (Addr 0x60)

GP18 - I2C1 SDA for display and IO expander
GP19 - I2C1 SCL for display and IO expander

IO Expander Notes

text
P0 - User indicator LED output
P1 - Audio amplifier enable (Low=enable output, high=shutdown amplifier)
P2 - ADC Input Select (Low=Microphone preamp out, High=QSD channel out)
P3 - TX band select 0
P4 - TX band select 1
P5 - RX band select 0
P6 - RX band select 1
P7 - Transmit PA enable (active low)

Wiring Notes

  • TXRX board I_PLUS (J4:1) -> Audio Breakout INL_PLUS (J4:1)
  • TXRX board I_MINUS (J4:2) -> Audio Breakout INL_MINUS (J4:2)
  • TXRX board Q_PLUS (J4:3) -> Audio Breakout INR_PLUS (J4:4)
  • TXRX board Q_MINUS (J4:5) -> Audio Breakout INR_MINUS (J4:3)
  • Microphone input is connected to the INL_PLUS/INL_MINUS pins on the audio breakout board.

Hardware Notes

Instrumentation Amplifiers on Receive Board

See Horowitz and Hill (3rd ed, section 5.16, figure 5.88) for a description of the instrumentation amplifier configuration used on the receive board. Gain for this amplifier is controlled determined by 1 + 2 Rf / Rg. Notice that the feedback path is tapped after a 47 ohm resistor to set the output impedance of the stage.

Assuming Rf is 520, Rg is 100, the theoretical gain is about 11.

Random

dBm = 30 + 20 * log(Vrms/sqrt(Z0))

Research

Consider the PCM1863 ADC?

Consider the TS5A4624 analog switch (logic high = 2.4V w/ 5V supply)

Consider PCF8574A IO expander: https://www.ti.com/lit/ds/symlink/pcf8574a.pdf?ts=1728869550852&ref_url=https%253A%252F%252Fwww.mouser.com%252F

RF Transistor: https://www.nxp.com/docs/en/data-sheet/BFU590G.pdf

References

PCM1804 Datasheet PCM5100 Datasheet

Steps to Build CMSIS-DSP

The library gets built once in a parallel project:

text
    cd ~/pico
    mkdir CMSISDSP
    cd CMSISDSP
    git clone https://github.com/ARM-software/CMSIS-DSP.git        
    git clone https://github.com/ARM-software/CMSIS_6.git
    cp $PICO_SDK_PATH/external/pico_sdk_import.cmake .

Then setup the CMakeLists.txt shown below and build:

text
    mkdir build
    cd build
    # IMPORTANT! pico2 build enables the generation of FPU instructions
    cmake -DPICO_BOARD=pico2 ..
    make -j4

What the CMakeLists.txt looks like:

text
cmake_minimum_required (VERSION 3.6)

# Pull in Pico SDK (must be before project)
include(pico_sdk_import.cmake) 

set(HOME $ENV{HOME})
set(CMSISDSP ${HOME}/pico/CMSISDSP/CMSIS-DSP)
set(CMSISCORE ${HOME}/pico/CMSISDSP/CMSIS_6/CMSIS/Core)

# Define the project
project (cmsis-dsp VERSION 0.1)

# Initialise the Pico SDK
pico_sdk_init()

add_subdirectory(${CMSISDSP}/Source bin_dsp)

target_compile_options(CMSISDSP PUBLIC 
    -Wsign-compare
    -Wdouble-promotion
    -Ofast -ffast-math
    -DNDEBUG
    -Wall -Wextra  -Werror
    -fshort-enums 
    #-fshort-wchar
)

Example of referencing the built CMSIS-DSP library in a client project:

text
set(HOME $ENV{HOME})
target_include_directories(main PRIVATE
  ${HOME}/pico/CMSISDSP/CMSIS-DSP/Include
  ${HOME}/pico/CMSISDSP/CMSIS_6/CMSIS/Core/Include
)
target_link_libraries(main
  pico_stdlib
  ${HOME}/pico/CMSISDSP/build/bin_dsp/libCMSISDSP.a
)

License

SDR2 Rig - Copyright (C) Bruce MacKinnon KC1FSZ, 2025

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see https://www.gnu.org/licenses/.

FOR AMATEUR RADIO USE ONLY. NOT FOR COMMERCIAL USE WITHOUT PERMISSION.

Parts

31
QtyValueFootprintReferences
41.4ubruce-footprints:FT37-43 UnifilarL1, L2, L3, L4
4C_Variablebruce-footprints:VCAP_GKG30086-05_SGM-LC6, C7, C9, C12
4MountingHoleMountingHole:MountingHole_3.5mmH1, H2, H3, H4
4TestPointTestPoint:TestPoint_Pad_1.5x1.5mmTP1, TP2, TP3, TP4
2150pbruce-footprints:C_0805_2012Metric_HandSolderC10, C13
2260pbruce-footprints:C_0805_2012Metric_HandSolderC2, C4
226pbruce-footprints:C_0805_2012Metric_HandSolderC8, C14
277pbruce-footprints:C_0805_2012Metric_HandSolderC1, C5
2Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2, J3
10.1ubruce-footprints:C_0805_2012Metric_HandSolderC15
118pbruce-footprints:C_0805_2012Metric_HandSolderC3
15pbruce-footprints:C_0805_2012Metric_HandSolderC11
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ1
1SN74CBT3253Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU1

More from brucemack/sdr2

6
  • 4 layers70 × 100 mmTxrx-1, the printed circuit board in 3D

    Txrx-1

    brucemack/sdr2

    This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.

    98 partsGPL-3.0
  • 2 layers68 × 41 mmTx-1, the printed circuit board in 3D

    Tx-1

    brucemack/sdr2

    This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.

    55 partsGPL-3.0
  • 2 layers60.3 × 46.5 mmKc1fsz rx6, the printed circuit board in 3D

    Kc1fsz rx6

    brucemack/sdr2

    This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.

    54 partsGPL-3.0
  • 2 layers76.3 × 41.5 mmAudio breakout, the printed circuit board in 3D

    Audio breakout

    brucemack/sdr2

    This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.

    46 partsGPL-3.0
  • 2 layers50 × 80 mmUtil-1, the printed circuit board in 3D

    Util-1

    brucemack/sdr2

    This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.

    46 partsGPL-3.0
  • 2 layers34.8 × 29 mmKc1fsz rx7, the printed circuit board in 3D

    Kc1fsz rx7

    brucemack/sdr2

    This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.

    18 partsGPL-3.0

Similar boards

  • 2 layers101.6 × 137.4 mmOpenxcvr, the printed circuit board in 3D

    Openxcvr

    dawsonjon/OpenXcvr

    Cost Effective HF transceiver based on max1000 FPGA module

    155 parts38MIT
  • 2 layers97 × 79.5 mmMBRadioDual2, the printed circuit board in 3D

    MBRadioDual2

    LadyRoninEngineer/Si473x

    Data Supporting development of Si473x series radios

    104 parts35Unlicense
  • 2 layers81.3 × 33.7 mmSDRReciever, the printed circuit board in 3D

    SDRReciever

    Dizzerin/Software-Defined-Radio

    Quadrature sampling down converter software defined radio

    67 parts24
  • 2 layers79.8 × 23.9 mmSdr, the printed circuit board in 3D

    Sdr

    pd0wm/simple-sdr

    Software Defined Radio for MF bands using STM32F042

    49 parts11MIT
  • 2 layers100 × 80 mmDeltaSDR, the printed circuit board in 3D

    DeltaSDR

    cernohorsky/DeltaSDR

    HF Software Defined Radio Transceiver that includes ADC and DAC circuits. No soundcard is needed. Board communicates only trough one USB cable.

    180 parts9
  • 2 layers100 × 100 mmSDRReciever, the printed circuit board in 3D

    SDRReciever

    KonradMcClure/SDR_Receiver

    Software Defined Radio Receiver designed together with Caleb Froelich (https://github.com/froeca) for our Walla Walla University Electronics II project.

    78 parts7
  • 4 layers81.1 × 75 mmBrs flight computer, the printed circuit board in 3D

    Brs flight computer

    Big-Red-Sat/Big-Red-Sat-1

    This repository contains the designs for the Big Red Sat-1, a 1U CubeSat examining the performance of perovskite solar cells in low earth orbit.

    266 parts6
  • 2 layers74 × 72.1 mmENGR357 Project v1.1, the printed circuit board in 3D

    ENGR357 Project v1.1

    pricna/Software-Defined-Radio-Receiver

    Software Defined Radio receiver created for Engineering Electronics II at Walla Walla University.

    80 parts3MPL-2.0

Questions

How big is the Bpf-1 PCB?

It measures 25 × 70 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Bpf-1 use?

31 parts, built around the SN74CBT3253D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Bpf-1 KiCad files?

From the brucemack/sdr2 repository on GitHub, at the commit this page was made from: the board is hw/bpf-1/bpf-1.kicad_pcb and its schematic hw/audio-breakout/adc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Bpf-1 design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).