Skip to the content
2 layers56 × 49 mmSA818-Breakout, the printed circuit board in 3D

SA818-Breakout

brucemack/microlink18

An open source EchoLink/AllStarLink implementation that runs on a simple microcontroller.

Size
56 × 49 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
20
Pads
65
Tracks, vias
58, 55
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
23 Jan 2024
Updated
28 Oct 2025

Overview

SA818-Breakout is an open-source printed circuit board by brucemack, from the brucemack/microlink repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 56 × 49 mm with 21 parts on 20 nets, routed with 58 tracks and 55 vias.

Its parts include 7 capacitors, 3 connectors, 2 ICs, 2 inductors and 1 resistor. It belongs with the radio and wireless and interfaces and adapters boards and the RP2040 boards of this library.

README

hw/ML3/README.md

This file contains the details for the version 3 (ML3) of the MicroLink hardware. This is the first version that has a real enclosure so we are paying more attention to mechanical detail.

Enclosure Considerations

Connectors That Penetrate the Enclosure

  • DC power connector - 5.5mm jack, male center pin positive.
  • Signal/audio connector - DB9, female.

Indicators That Penetrate the Enclosure

  • Three indicator LEDs - D1 Red, D3 blue, D4 green

Thermal

  • The 3.3V LDO gets warm so there should be airflow in that vicinity

Change Log (V3)

R1 (17-Apr-2024)

  • Moved Pi Pico W daughter card up by 1.00mm.
  • Moved clear area under Pi Pico W daughter card up by 0.75mm.
  • Moved J2 (5.5mm power jack) up by 2.5mm.
  • Moved J1 (DB9) right by 2.5mm.

DRC Notes:

  • There are 12 warnings: "Silkscreen clipped by board edge."

Parts

21
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_4mmH1, H2, H3, H4
3C_Small_USCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3, C4, C7
2100nCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC5, C6
222uCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
2L_IronInductor_THT:L_Axial_L6.6mm_D2.7mm_P10.16mm_Horizontal_Vishay_IM-2L1, L2
2TestPointTestPoint:TestPoint_Pad_2.5x2.5mmTP1, TP8
14.7Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR9
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1Conn_01x10Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_VerticalJ3
1Conn_Coaxialbruce-footprints:SMA_Amphenol_901-144_VerticalJ1
1NCP1117-5.0_SOT223Package_TO_SOT_SMD:SOT-223-3_TabPin2U10
1~bruce-footprints:SA818U1

More from brucemack/microlink

5
  • 2 layers125 × 56 mmML2, the printed circuit board in 3D

    ML2

    brucemack/microlink

    An open source EchoLink/AllStarLink implementation that runs on a simple microcontroller.

    73 parts18GPL-3.0
  • 2 layers130 × 56 mmML3, the printed circuit board in 3D

    ML3

    brucemack/microlink

    An open source EchoLink/AllStarLink implementation that runs on a simple microcontroller.

    73 parts18GPL-3.0
  • 2 layers130 × 56 mmML4, the printed circuit board in 3D

    ML4

    brucemack/microlink

    An open source EchoLink/AllStarLink implementation that runs on a simple microcontroller.

    73 parts18GPL-3.0
  • 2 layers125 × 56 mmML1, the printed circuit board in 3D

    ML1

    brucemack/microlink

    An open source EchoLink/AllStarLink implementation that runs on a simple microcontroller.

    71 parts18GPL-3.0
  • 2 layers100 × 59 mmML0, the printed circuit board in 3D

    ML0

    brucemack/microlink

    An open source EchoLink/AllStarLink implementation that runs on a simple microcontroller.

    65 parts18GPL-3.0

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the SA818-Breakout PCB?

It measures 56 × 49 mm and has 2 copper layers, 1.6 mm thick.

What parts does the SA818-Breakout use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the SA818-Breakout KiCad files?

From the brucemack/microlink repository on GitHub, at the commit this page was made from: the board is hw/SA818-Breakout/SA818-Breakout.kicad_pcb and its schematic hw/ML0/AudioIn.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the SA818-Breakout design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).