

Tester
Padauk based WS2812 LED tester
- Size
- 35 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 12
- Pads
- 44
- Tracks, vias
- 96, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 20 Jan 2021
- Updated
- 15 Dec 2023
Overview
Tester is an open-source printed circuit board by brainsmoke, from the brainsmoke/ws2812tester repository on GitHub. It is a 2-layer board of 35 × 20 mm with 13 parts on 12 nets, routed with 96 tracks and 4 vias.
Its parts include 5 connectors, 2 capacitors, 2 resistors and 2 ICs. It belongs with the lEDs and displays boards and the PIC boards of this library.
README
README.mdPadauk based WS2812 LED tester
- tests using low brightness [0..15] & temporal dithering for a smooth animation
- Tests using a 3v3 data signal (which should be OK for V5 LEDs)

Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 2 | C | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2 |
| 2 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4, J5 |
| 1 | AP2204K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Conn_01x01_Male | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | PIC12F1501-ISN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | USB_C_Receptacle_USB2.0 | USB-C-Power-tester:TYPE-C-31-M-17 | J1 |
The 11 most common of 13 parts.
Similar boards
- 2 layers40 × 20 mm

- 2 layers74.9 × 49.5 mm

- 2 layers35 × 29 mm

MagSpoofTC
samyk/magspoof
A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.
13 parts4.2k - 2 layers20.6 × 23.6 mm

AO-03 signal amplifier
fossasia/pslab-scripts
Pocket Science Lab - Scripts for Sensor Experiments
13 parts1.6kApache-2.0 - 2 layers47 × 35.6 mm

- 2 layers95 × 95 mm

Cube batteryboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels
13 parts1.1kGPL-3.0 - 2 layers15.2 × 20.3 mm

Pt100stick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
13 parts1.1kGPL-3.0 - 2 layers53.9 × 23.2 mm

Buffer
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
13 parts1kGPL-3.0
Questions
How big is the Tester PCB?
It measures 35 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tester use?
13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tester KiCad files?
From the brainsmoke/ws2812tester repository on GitHub, at the commit this page was made from: the board is pcb/tester/tester.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tester design in my own project?
Its repository states no licence, so its author keeps all rights: ask brainsmoke before reusing the design.