8 layers50 × 50 mm
8 layers50 × 50 mm
Power
box1o/woki-camerainfrared marker tracking camera
- Size
- 50 × 50 mm
- Copper layers
- 8
- Thickness
- 1.6 mm
- Parts
- 5
- Nets
- 100
- Pads
- 104
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 10 Oct 2026
- Updated
- 10 Oct 2026
Overview
Power is an open-source printed circuit board by box1o, from the box1o/woki-camera repository on GitHub, published under the MIT licence. It is an 8-layer board of 50 × 50 mm with 5 parts on 100 nets.
It is built around the DF40HC(3.0)-100DS-0.4V(51).
Main components
1README
README.mdwoki cam
modular infrared camera for optical tracking of retroreflective markers.
Parts
5| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MNT_HOLE_M3 | MNT_HOLE_M3 | H1, H2, H3, H4 |
| 1 | DF40HC(3.0)-100DS-0.4V(51) | Woki:CONN_DF40_100P_F | J1 |
More from box1o/woki-camera
2- 8 layers50 × 50 mm
Similar boards
- 4 layers128.5 × 40 mm
Scalenode cm4-baseboard
antmicro/scalenode-cm4-baseboard
Baseboard for Raspberry Pi 4 Compute Module optimized for clustering
146 parts152Apache-2.0 - 4 layers118 × 117 mm
Cm4-robot
Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.
268 parts81 - 2 layers70 × 20 mm
PicoBerry V1.0
mfolejewski/PicoBerry
PicoBerry - small CM4 carrier board with full 40-pin GPIO header
36 parts63 - 6 layers107 × 68 mm
Cm4-baseboard
antmicro/cm4-baseboard
Experimental baseboard supporting System on Modules with Raspberry Pi CM4/CM5 pinout
516 parts36Apache-2.0 - 4 layers100 × 100 mm
- 4 layers171.5 × 243.8 mm
- 4 layers93.3 × 58.9 mm
LTELink
UBCOAerospaceClub/LTELink
A base board for the Raxda CM3 to stream live video and telemetry through LTE
107 parts1CERN-OHL-W-2.0 - 4 layers56.2 × 70.5 mm
Questions
How big is the Power PCB?
It measures 50 × 50 mm and has 8 copper layers, 1.6 mm thick.
What parts does the Power use?
5 parts, built around the DF40HC(3.0)-100DS-0.4V(51). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power KiCad files?
From the box1o/woki-camera repository on GitHub, at the commit this page was made from: the board is boards/01-power/power.kicad_pcb and its schematic boards/01-power/power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).