8 layers50 × 50 mm
8 layers50 × 50 mm
Fpga control
box1o/woki-camerainfrared marker tracking camera
- Size
- 50 × 50 mm
- Copper layers
- 8
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 200
- Pads
- 208
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 10 Oct 2026
- Updated
- 10 Oct 2026
Overview
Fpga control is an open-source printed circuit board by box1o, from the box1o/woki-camera repository on GitHub, published under the MIT licence. It is an 8-layer board of 50 × 50 mm with 6 parts on 200 nets.
It is built around the DF40C-100DP-0.4V(51) and DF40HC(3.0)-100DS-0.4V(51). It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Main components
2
DF40C-100DP-0.4V(51)
SMD,P=0.4mm-35℃~+85℃ 0.4mm 100P 2 300mA Gold Slot Type Butting Surface Mount,Vertical SMD,P=0.4mm Board-to-Board and Backplane Connector ROHSHirose ElectricBoard-To-Board And Backplane Connector
DF40HC(3.0)-100DS-0.4V(51)
SMD,P=0.4mm-35℃~+85℃ 0.4mm 100P 2 300mA Gold Slot Type Butting Surface Mount,Vertical SMD,P=0.4mm Board-to-Board and Backplane Connector ROHSHirose ElectricBoard-To-Board And Backplane Connector
README
README.mdwoki cam
modular infrared camera for optical tracking of retroreflective markers.
Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MNT_HOLE_M3 | MNT_HOLE_M3 | H1, H2, H3, H4 |
| 1 | DF40C-100DP-0.4V(51) | Woki:CONN_DF40_100P_M | J1 |
| 1 | DF40HC(3.0)-100DS-0.4V(51) | Woki:CONN_DF40_100P_F | J2 |
Questions
How big is the Fpga control PCB?
It measures 50 × 50 mm and has 8 copper layers, 1.6 mm thick.
What parts does the Fpga control use?
6 parts, built around the DF40C-100DP-0.4V(51) and DF40HC(3.0)-100DS-0.4V(51). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Fpga control KiCad files?
From the box1o/woki-camera repository on GitHub, at the commit this page was made from: the board is boards/02-fpga-control/fpga_control.kicad_pcb and its schematic boards/01-power/power.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Fpga control design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from box1o/woki-camera
2- 8 layers50 × 50 mm
Similar boards
- 4 layers128.5 × 40 mm
Scalenode cm4-baseboard
antmicro/scalenode-cm4-baseboard
Baseboard for Raspberry Pi 4 Compute Module optimized for clustering
146 parts152Apache-2.0 - 4 layers118 × 117 mm
Cm4-robot
Twisted-Fields/acorn-robot-electronics
PCB hardware designs in KICAD for Acorn, the precision farming rover from Twisted Fields.
268 parts81 - 2 layers70 × 20 mm
PicoBerry V1.0
mfolejewski/PicoBerry
PicoBerry - small CM4 carrier board with full 40-pin GPIO header
36 parts63 - 6 layers107 × 68 mm
Cm4-baseboard
antmicro/cm4-baseboard
Experimental baseboard supporting System on Modules with Raspberry Pi CM4/CM5 pinout
516 parts36Apache-2.0 - 4 layers100 × 100 mm
- 4 layers171.5 × 243.8 mm
- 4 layers93.3 × 58.9 mm
LTELink
UBCOAerospaceClub/LTELink
A base board for the Raxda CM3 to stream live video and telemetry through LTE
107 parts1CERN-OHL-W-2.0 - 4 layers56.2 × 70.5 mm
