4 layers26 × 26 mm
2 layers30.5 × 20.3 mm
Ontvanger
bovdham/pcb_stoppcb files for the stop quest project
- Size
- 30.5 × 20.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 62
- Pads
- 145
- Tracks, vias
- 150, 14
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 9 May 2022
- Updated
- 16 May 2022
Overview
Ontvanger is an open-source printed circuit board by bovdham, from the bovdham/pcb_stop repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 30.5 × 20.3 mm with 19 parts on 62 nets, routed with 150 tracks and 14 vias.
It is built around the STM32WB30CEU5A, QAM-RX10-433 and TPS61200DRC, with the BAT-HLD-001 and AO3401A among its other parts. Its parts include 5 capacitors, 5 ICs, 4 resistors, 2 connectors and 1 diode. It belongs with the STM32 boards of this library.
Main components
5
STM32WB30CEU5A
UFQFPN-48(7x7)-100dBm -10℃~+85℃ 1Mbps 2.4GHz 2V~3.6V 4dBm 7.9mA 8.8mA SPI、USART、I2C ZigBee、Bluetooth、802.15.4 transceiver UFQFPN-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)QAM-RX10-433
SIP-4RF ModulesRF Solutions
TPS61200DRC
VSON-10-EP(3x3)-40℃~+125℃@(TJ) 1 1.65MHz 1.8V~5.5V 300mV~5.5V Adjustable Boost Boost Built-in Yes VSON-10-EP(3x3) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
BAT-HLD-001
SMDSMD Button And Strip Battery Connector ROHSTE ConnectivityButton And Strip Battery Connector
AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3 |
| 2 | 10k | Resistor_SMD:R_0201_0603Metric | R1, R2 |
| 1 | 180k | Resistor_SMD:R_0201_0603Metric | R4 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 2.2uH | Inductor_SMD:L_0402_1005Metric | L1 |
| 1 | 22uF | Capacitor_SMD:C_0402_1005Metric | C5 |
| 1 | 2M | Resistor_SMD:R_0201_0603Metric | R3 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BAT-HLD-001 | KiCad libs:BATHLD001 | U1 |
| 1 | Conn_01x04_Male | Connector_PinHeader_1.00mm:PinHeader_1x04_P1.00mm_Vertical | J1 |
| 1 | D_Schottky | Diode_SMD:D_0402_1005Metric | D1 |
| 1 | MCP73831-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | QAM-RX10-433 | KiCad libs:QAMRX10433 | IC2 |
| 1 | STM32WB30CEU5A | KiCad libs:QFN50P700X700X60-49N-D | IC1 |
| 1 | TPS61200DRC | Package_SON:Texas_S-PVSON-N10_ThermalVias | U3 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105133-0001 | J2 |
Questions
How big is the Ontvanger PCB?
It measures 30.5 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ontvanger use?
19 parts, built around the STM32WB30CEU5A, QAM-RX10-433, TPS61200DRC and BAT-HLD-001. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ontvanger KiCad files?
From the bovdham/pcb_stop repository on GitHub, at the commit this page was made from: the board is Ontvanger/Ontvanger.kicad_pcb and its schematic HardwareImplementatiePCB/HardwareImplementatiePCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ontvanger design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers68.2 × 73.5 mm
- 2 layers145 × 75 mm
- 2 layers
Lightclock
Anvarys/lightclock
Light Clock A custom PCB-based Clock/Alarm with a runrise alarm, a circle of capacitive touch controls to easily choose the time and a 2.42" OLED display
202 parts - 4 layers35.1 × 76.3 mm
Tiny4FSK
New-England-Weather-Balloon-Society/Tiny4FSK
Horus Binary v2 HAB Tracker
90 parts96CERN-OHL-W-2.0 - 4 layers61.8 × 79.6 mm
- 2 layers56 × 56 mm
PiPower v2
wyolum/pi-power
Full featured power options for the Raspberry Pi. 12V, 5V, Lipo, with push/push on/off and power meter.
81 parts4MIT - 2 layers38.1 × 50.8 mm
SAO Demo Controller
ageppert/SAO_Demo_Controller
A small inline SAO with an RP2040 used to demo SAOs that require smarts, but don't have it built-in.
59 parts3