Skip to the content
2 layers26.2 × 26.2 mmMicrocontroller, the printed circuit board in 3D

It's a Twitterversary block, but with a screen and the internet.

Size
26.2 × 26.2 mm
Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
20
Pads
72
Tracks, vias
219, 8
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
16 Nov 2020
Updated
1 Sep 2022

Overview

Microcontroller is an open-source printed circuit board by bountylabs, from the bountylabs/blocks-with-screens repository on GitHub, published under the MIT licence. It is a 2-layer board of 26.2 × 26.2 mm with 15 parts on 20 nets, routed with 219 tracks and 8 vias.

It is built around the LIS2DW12 and WS2812B-5050RGB. Its parts include 5 capacitors, 4 resistors, 1 IC, 1 diode and 1 connector. It belongs with the ESP8266 boards of this library.

Main components

2

README

README.md

Blocks With Screens

.github/workflows/main.yml Twitter URL

Block in its natural habitatAnimated 3d blockPuzzle-style block

It's Twitterversary blocks, but with screens and internet. Originally a Fall 2019 Twitter HackWeek project by @johnboiles, @magus, @mikeperiscope, @seanfchan, and @smartfuse.

Assembly

Click here to view assembly instructions on YouTube

assembly-video-thumbnail

Tips, notes & corrections:

  • To protect the pins, we're shipping with two of the circuit boards attached to eachother. You'll need to separate these circuit boards before following the instructions above. Just gently pull them apart to separate them. They're hard to break :)
  • Some of the boards may have small tabs protruding from the sides which may cause them not to fit in the wooden block. This is a byproduct of the manufacturing process. Clip these tabs off with nail clippers or wire clippers.
  • Feel free to ask us on Twitter @blkswithscreens if you have any questions or problems!

Components

Blockware

This is the example software that you can run on the blocks. See blockware/README.md for installation instructions and a listing (with gifs!) of the available blockware.

CAD

This contains the various design files building the block hardware. Most importantly, it contains the Autodesk Eagle design files for the 3 PCBs that make up the block. See the README.md in that directory for an overview of the responsibilities of the three different boards.

Parts

15
QtyValueFootprintReferences
410KResistor_SMD:R_0805_2012MetricR1, R2, R3, R4
2100nFCapacitor_SMD:C_0805_2012MetricC3, C5
210uFCapacitor_SMD:C_0805_2012MetricC1, C4
2PINHD-1X8CLEANBIGmicrocontroller:1X08-CLEANBIGJP1, JP2
1.1uFCapacitor_SMD:C_0805_2012MetricC2
1ESP-12microcontroller:ESP-12X1
1LIS2DW12Package_LGA:LGA-12_2x2mm_P0.5mmU2
1SMDmicrocontroller:1X04_1MM_RAJ1
1WS2812B5050microcontroller:WS2812BLED1

Similar boards

  • 4 layers53 × 40 mmSB main board, the printed circuit board in 3D

    SB main board

    CharlieYu4994/SB_CAN

    为 Voron Design 的 StealthBurner 设计的 CAN 总线工具头板

    95 parts10
  • 2 layers46.4 × 18.8 mmDensor nfc v2, the printed circuit board in 3D

    Densor nfc v2

    TUDSSL/densor

    Densor is an intraoral sensor platform, attached to regular dental retainers or aligners, that can take measurements inside the mouth.

    25 parts3MIT
  • 4 layers20 × 38 mmDuet3 SZP, the printed circuit board in 3D

    Duet3 SZP

    Duet3D/Duet3-ScanningZProbe

    The Duet 3 Scanning Z probe is a CAN-FD connected inductive sensing board, with compatible inductive PCB coils. It allows for a point mesh of the bed to be built up quickly as no movement in Z is required to read the…

    81 parts2
  • 2 layers55 × 45 mmIot risk logger stm32l4, the printed circuit board in 3D

    Iot risk logger stm32l4

    polesskiy-dev/iot-risk-logger-stm32l4

    Open IoT risk data logger based on STM32L4 MCU

    52 parts2
  • 2 layersLCP Controller, the printed circuit board in 3D

    LCP Controller

    NOAA-PMEL/EDD-LCP_Control

    Control PCB & Firmware for Low Cost Profiler

    251 parts1MIT
  • 2 layers176.5 × 83.3 mmMultifunctional fn keyboard, the printed circuit board in 3D

    Multifunctional fn keyboard

    felix-myrie/multifunctional-fn-keyboard

    A function keyboard that is also a game controller

    27 partsMIT
  • 4 layers22 × 22 mmThing De La AI Back Of Hand, the printed circuit board in 3D

    Thing De La AI Back Of Hand

    i2cjak/Thing_De_La_AI_Back_Of_Hand

    This repository contains a KiCad project template provided by American Embedded. It is designed to be a starting point for new electronic designs, pre-configured with common settings, layers, and manufacturing outputs.

    10 partsCERN-OHL-P-2.0
  • 2 layers90 × 55 mmS3.1-before repack, the printed circuit board in 3D

    S3.1-before repack

    puji4810/coffe-scale

    USB-C J5 ──► U8 ESD ──► R19/R20 22R ──► U4 IO19/IO20 (native USB-Serial/JTAG) │VBUS ├─► U5 TP4057 充电 ──► J6 1S Li-ion └─► D1/Q1 负载切换 ──► VSYS ──► U6 XC6220 3V3 1A ──► VCC3V3 ──► U4/外设 └──► U7 HT7533 ──► VDDADC ──► U1/U3…

    96 partsApache-2.0

Questions

How big is the Microcontroller PCB?

It measures 26.2 × 26.2 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Microcontroller use?

15 parts, built around the LIS2DW12 and WS2812B-5050RGB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Microcontroller KiCad files?

From the bountylabs/blocks-with-screens repository on GitHub, at the commit this page was made from: the board is cad/pcb/kicad/microcontroller.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Microcontroller design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).