2 layers29 × 99 mm
Main pcb
Testbild-synth/HAGIWO-029-033-Eurorack-quantizer
Through hole PCB version of the HAGIWO Dual Quantizer/SH101 Sequencer Eurorack Module-.
28 parts40MIT
2 layers96.6 × 88.6 mm
Water ctrl hw
bou6/water_ctrl_hw- Size
- 96.6 × 88.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 23
- Nets
- 38
- Pads
- 84
- Tracks, vias
- 133, 6
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 10 Oct 2024
- Updated
- 10 Oct 2024
Overview
Water ctrl hw is an open-source printed circuit board by bou6, from the bou6/water_ctrl_hw repository on GitHub. It is a 2-layer board of 96.6 × 88.6 mm with 23 parts on 38 nets, routed with 133 tracks and 6 vias.
It is built around the LD1117V33, BC547A and SRD-12VDC-SL-C. Its parts include 4 capacitors, 4 resistors, 3 ICs, 3 diodes and 2 connectors.
Main components
3
LD1117V33
TO-2200℃~+125℃@(Tj) 1 1.2V@(800mA) 100uV 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Thermal Shutdown Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
BC547A
TO-92100mA 110 15nA 300MHz 45V 600mV NPN TO-92 Bipolar (BJT) ROHSDIOTECBipolar (BJT)
SRD-12VDC-SL-C
插件,19.2x15.6mm100mΩ 10ms 10ms 12V 15A 250V@AC 360mW 400Ω 5 Non-Polarized - Single Coil One set changeover: 1C (SPDT - changeover) 插件,19.2x15.6mm Power Relays ROHS松乐Power Relays
Parts
23| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D3 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 2K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | BC547A | Package_TO_SOT_THT:TO-92_Inline | Q2 |
| 1 | Jack-DC | Connector_BarrelJack:BarrelJack_CUI_PJ-063AH_Horizontal | J2 |
| 1 | LD1117V33 | LD1117V33:TO255P1020X450X1968-3 | U1 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | U5 |
| 1 | RED_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | SRD-12VDC-SL-C | SRD-12VDC-SL-C:RELAY_SRD-12VDC-SL-C | K2 |
| 1 | SW_SPST | Button_Switch_SMD:SW_SPST_B3U-1000P | SW2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_Xinya_XY308-2.54-2P_1x02_P2.54mm_Horizontal | J3 |
| 1 | YELLOW_LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | myNodemcUv3 | myNodemcuv3:myNodeMcuv3 | U2 |
Similar boards
- 2 layers83.5 × 83.7 mm
Leomanangka esp32-4-channel relays esp32-4-channel relays
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
63 parts1 - 2 layers104.2 × 144.9 mm
CC PCB V1
danielwilczak101/EasyDrift
ERAU and EPPL collaberation to create an autonomous drift cart that drives around campus.
37 parts - 2 layers92 × 72.2 mm
- 4 layers144.2 × 82.8 mm
SmartFuseBox
k3ldar/PowerControlHub
PowerControlHub is a flexible automation controller for 12V systems. It combines relay switching, sensor monitoring, and smart‑home connectivity (MQTT, Home Assistant, REST, BLE) into one device.
93 parts5GPL-3.0 - 2 layers100 × 74 mm
Qym solder
basson/qym-solder
QymSolder - Soldering station three in one - hakko t12, hot air gun, d909/898D or analog.
135 parts4GPL-3.0 - 2 layers215 × 90 mm
Motor Board
acwright/Sherline-CNC-Conversion
Project files for my Sherline Lathe and Mill CNC conversion
46 parts1MIT - 4 layers83 × 67.5 mm
MarineBoard
Cadburies/SisuAssistant
Sailing yacht Sisu: Home Assistant + ESPHome Marine Board (alternator regulation, tanks) + MQTT kernel, Signal K/Grafana/InfluxDB on a NAS, and Sisu Nav chart & weather-routing cockpit.
162 parts1Apache-2.0
Questions
How big is the Water ctrl hw PCB?
It measures 96.6 × 88.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Water ctrl hw use?
23 parts, built around the LD1117V33, BC547A and SRD-12VDC-SL-C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Water ctrl hw KiCad files?
From the bou6/water_ctrl_hw repository on GitHub, at the commit this page was made from: the board is water_ctrl_hw.kicad_pcb and its schematic water_ctrl_hw.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Water ctrl hw design in my own project?
Its repository states no licence, so its author keeps all rights: ask bou6 before reusing the design.