
Wandfernsprecher
hanebefl/wandfernsprecher-hw
GSM conversion for a old German Wandfernsprecher telephone

Simple PCB for S3 mini module. Includes battery charging and measurement, buck-boost converter to make full use of lipo batteries, and edge SMA antenna connector.
ESP32-S3-Mini PCB is an open-source printed circuit board by boriben, from the boriben/ESP32-S3-Mini-PCB repository on GitHub. It is a 4-layer board of 44.1 × 37.1 mm with 40 parts on 66 nets, routed with 338 tracks and 137 vias.
It is built around the ESP32-S3-MINI-1U-N8, BQ24090DGQR and USBLC6-2SC6. Its parts include 11 resistors, 10 connectors, 9 capacitors, 4 ICs and 3 switches. It belongs with the power boards and the ESP32 boards of this library.
I had a s3 mini module laying around, so I decided to design a board for it. Now I have even more s3 minis laying around :D
I learned a lot from this project!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 5.1K | Resistor_SMD:R_0402_1005Metric | R1, R2, R5 |
| 2 | 1.5k | Resistor_SMD:R_0402_1005Metric | R7, R8 |
| 2 | 10u | Capacitor_SMD:C_0402_1005Metric | C3, C5 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 220k | Resistor_SMD:R_0402_1005Metric | R11, R12 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric | C8, C11 |
| 2 | Conn_01x02_Socket | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J6, J9 |
| 2 | Conn_01x08_Socket | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4, J10 |
| 1 | 100n | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 1uH | Inductor_SMD:1277AS-H-1R0M=P2 | L1 |
| 1 | 2.1k | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 4.7u | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 540 | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | BAT+ | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J7 |
| 1 | BAT- | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | BOOT | Button_Switch_SMD:3x4x2mm button | SW1 |
| 1 | BQ24090DGQ | Package_SO:HVSSOP-10-1EP_3x3mm_P0.5mm_EP1.57x1.88mm_ThermalVias | U5 |
| 1 | CHG | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | Conn_01x04_Socket | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | E01 SMA | SMA-J-P-H-ST-EM1:SAMTEC_SMA-J-P-H-ST-EM1 | J5 |
| 1 | EN | Button_Switch_SMD:3x4x2mm button | SW3 |
| 1 | ESP32-S3-MINI-1U | RF_Module:ESP32-S2-MINI-1U | U1 |
| 1 | ISET_SW | Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mm | SW4 |
| 1 | MHF4 | IPEX MHF4:IPEX_20449-001E-03 | J3 |
| 1 | PG | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | ~ | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U4 |

hanebefl/wandfernsprecher-hw
GSM conversion for a old German Wandfernsprecher telephone

jpt1729/Steer32
Steer32 is an ESP32 Devboard with support for a lipo battery and a 1.9" IPS Screen

sneakylizard123-4/MP3player
Why the STM32H743: it has the RAM to buffer audio enough peripherals that almost every feature ended up on its own bus and 480MHz means I never have to care about optimization.

nasheed-x/aether
Aether is a versatile flight computer for testing flight hardware and software, focusing on sensor fusion to monitor rocket states and interface with on-board systems.




guolic1/AirDAP
基于 ESP32-S3 的无线调试器,支持 CMSIS-DAP 调试烧录和串口通信。 通过 USB 直连,或使用 Windows / Linux 主机服务将网络设备映射为 USB 调试器和串口。
It measures 44.1 × 37.1 mm and has 4 copper layers, 1.6 mm thick.
40 parts, built around the ESP32-S3-MINI-1U-N8, BQ24090DGQR and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the boriben/ESP32-S3-Mini-PCB repository on GitHub, at the commit this page was made from: the board is pcb.kicad_pcb and its schematic pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask boriben before reusing the design.