Skip to the content
4 layers44.1 × 37.1 mmESP32-S3-Mini PCB, the printed circuit board in 3D

ESP32-S3-Mini PCB

boriben/ESP32-S3-Mini-PCB

Simple PCB for S3 mini module. Includes battery charging and measurement, buck-boost converter to make full use of lipo batteries, and edge SMA antenna connector.

Size
44.1 × 37.1 mm
Copper layers
4
Thickness
1.6 mm
Parts
40
Nets
66
Pads
234
Tracks, vias
338, 137
Pours
6
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
11 Feb 2026
Updated
24 Jun 2026

Overview

ESP32-S3-Mini PCB is an open-source printed circuit board by boriben, from the boriben/ESP32-S3-Mini-PCB repository on GitHub. It is a 4-layer board of 44.1 × 37.1 mm with 40 parts on 66 nets, routed with 338 tracks and 137 vias.

It is built around the ESP32-S3-MINI-1U-N8, BQ24090DGQR and USBLC6-2SC6. Its parts include 11 resistors, 10 connectors, 9 capacitors, 4 ICs and 3 switches. It belongs with the power boards and the ESP32 boards of this library.

Main components

3

README

README.md

ESP32-S3-Mini-PCB

I had a s3 mini module laying around, so I decided to design a board for it. Now I have even more s3 minis laying around :D I learned a lot from this project! IMG_3736

Parts

40
QtyValueFootprintReferences
35.1KResistor_SMD:R_0402_1005MetricR1, R2, R5
21.5kResistor_SMD:R_0402_1005MetricR7, R8
210uCapacitor_SMD:C_0402_1005MetricC3, C5
210uCapacitor_SMD:C_0603_1608MetricC1, C2
2220kResistor_SMD:R_0402_1005MetricR11, R12
222uCapacitor_SMD:C_0603_1608MetricC8, C11
2Conn_01x02_SocketConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ6, J9
2Conn_01x08_SocketConnector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_VerticalJ4, J10
1100nCapacitor_SMD:C_0402_1005MetricC4
110kResistor_SMD:R_0402_1005MetricR9
11uCapacitor_SMD:C_0402_1005MetricC9
11uHInductor_SMD:1277AS-H-1R0M=P2L1
12.1kResistor_SMD:R_0402_1005MetricR3
12kResistor_SMD:R_0402_1005MetricR6
14.7uCapacitor_SMD:C_0402_1005MetricC10
1540Resistor_SMD:R_0402_1005MetricR10
1BAT+Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ7
1BAT-Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_VerticalJ2
1BOOTButton_Switch_SMD:3x4x2mm buttonSW1
1BQ24090DGQPackage_SO:HVSSOP-10-1EP_3x3mm_P0.5mm_EP1.57x1.88mm_ThermalViasU5
1CHGLED_SMD:LED_0603_1608MetricD3
1Conn_01x04_SocketConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ8
1E01 SMASMA-J-P-H-ST-EM1:SAMTEC_SMA-J-P-H-ST-EM1J5
1ENButton_Switch_SMD:3x4x2mm buttonSW3
1ESP32-S3-MINI-1URF_Module:ESP32-S2-MINI-1UU1
1ISET_SWButton_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mmSW4
1MHF4IPEX MHF4:IPEX_20449-001E-03J3
1PGLED_SMD:LED_0603_1608MetricD1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U3
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASVJ1
1~Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mmU4

Similar boards

  • 4 layers132.5 × 82 mmWandfernsprecher, the printed circuit board in 3D

    Wandfernsprecher

    hanebefl/wandfernsprecher-hw

    GSM conversion for a old German Wandfernsprecher telephone

    93 parts6
  • 2 layers29 × 62.2 mmSteer32, the printed circuit board in 3D

    Steer32

    jpt1729/Steer32

    Steer32 is an ESP32 Devboard with support for a lipo battery and a 1.9" IPS Screen

    58 parts
  • 6 layers50 × 70 mmMP3player, the printed circuit board in 3D

    MP3player

    sneakylizard123-4/MP3player

    Why the STM32H743: it has the RAM to buffer audio enough peripherals that almost every feature ended up on its own bus and 480MHz means I never have to care about optimization.

    150 parts
  • 6 layers100 × 60 mmAether, the printed circuit board in 3D

    Aether

    nasheed-x/aether

    Aether is a versatile flight computer for testing flight hardware and software, focusing on sensor fusion to monitor rocket states and interface with on-board systems.

    180 parts10
  • 2 layers50.2 × 95.2 mmCheetoPet, the printed circuit board in 3D

    CheetoPet

    Cheet0sDelet0s/cheetoPet

    an esp32 s3 based tamagotchi

    104 parts3GPL-2.0
  • 2 layers44 × 20 mmUsb dmx, the printed circuit board in 3D

    Usb dmx

    Soraxem/trance

    Open Lighting hardware

    21 parts1CERN-OHL-P-2.0
  • 4 layers84.5 × 53.1 mmPinaBio Paca v2.0, the printed circuit board in 3D

    PinaBio Paca v2.0

    AlejandroPina/PinaBio-Paca-v2.0-beta

    PinaBio Paca v2.0 beta

    89 parts
  • 2 layers42.5 × 21.8 mmAirDAP, the printed circuit board in 3D

    AirDAP

    guolic1/AirDAP

    基于 ESP32-S3 的无线调试器,支持 CMSIS-DAP 调试烧录和串口通信。 通过 USB 直连,或使用 Windows / Linux 主机服务将网络设备映射为 USB 调试器和串口。

    79 partsMIT

Questions

How big is the ESP32-S3-Mini PCB PCB?

It measures 44.1 × 37.1 mm and has 4 copper layers, 1.6 mm thick.

What parts does the ESP32-S3-Mini PCB use?

40 parts, built around the ESP32-S3-MINI-1U-N8, BQ24090DGQR and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ESP32-S3-Mini PCB KiCad files?

From the boriben/ESP32-S3-Mini-PCB repository on GitHub, at the commit this page was made from: the board is pcb.kicad_pcb and its schematic pcb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ESP32-S3-Mini PCB design in my own project?

Its repository states no licence, so its author keeps all rights: ask boriben before reusing the design.