2 layers104.1 × 125 mm
Dial MVP2
borgel/bolton_buttons
Small devices to add keys to devices that have too few
33 parts13MPL-2.0
4 layers25.5 × 157.5 mm
Linear MVP3
borgel/bolton_buttons13Small devices to add keys to devices that have too few
- Size
- 25.5 × 157.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 69
- Pads
- 247
- Tracks, vias
- 740, 75
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 Dec 2018
- Updated
- 27 Apr 2019
Overview
Linear MVP3 is an open-source printed circuit board by borgel, from the borgel/bolton_buttons repository on GitHub, published under the MPL-2.0 licence. It is a 4-layer board of 25.5 × 157.5 mm with 43 parts on 69 nets, routed with 740 tracks and 75 vias.
It is built around the TCA9555RTWR(UMW). Its parts include 17 switches, 8 capacitors, 6 ICs, 5 resistors and 2 diodes. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
1README
README.mdbolton_buttons
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C101, C102, C103, C104, C105, C106, C107, C108 |
| 8 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW201, SW202, SW207, SW208, SW210, SW211, SW214, SW215 |
| 4 | R_Pack 10k | Resistor_SMD:R_Array_Convex_4x1206 | RN101, RN102, RN103, RN104 |
| 4 | Rotary_Encoder_Switch | Borgel Custom:PEC11R | SW101, SW102, SW103, SW104 |
| 4 | SW_Push | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx83-2LFS | SW203, SW205, SW212, SW213 |
| 3 | APA102_5050 | Borgel Custom:LED-5050 | U102, U105, U108 |
| 2 | 4.7k | Resistor_SMD:R_0805_2012Metric | R101, R102 |
| 2 | 500r | Resistor_SMD:R_0805_2012Metric | R114, R202 |
| 2 | LED_ALT | Borgel Custom:LED_0603_SmallSilk | D101, D201 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R201 |
| 1 | 24LC16-SOT-23-5 | Package_TO_SOT_SMD:SOT-23-5 | U103 |
| 1 | LOGO | Borgel Custom:BTG Logo 0.5in | G*** |
| 1 | SW_Push | Borgel Custom:Schurter-MTG | SW105 |
| 1 | TCA9555RTWR | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U201 |
| 1 | Teensy-LC | teensy:Teensy30_31_32_LC | U101 |
More from borgel/bolton_buttons
1Similar boards
- 4 layers24 × 24 mm
Wp plus
loopj/wavephoenix-plus
The WavePhoenix+ is a custom PCB which allows you to add WaveBird support to portable Wii/GameCube consoles. It is footprint compatible with the 4Layer Technologies GC+ 2.0 board, and emulates both a physical GameCube…
48 parts8 - 4 layers52 × 115.7 mm
- 4 layers136.2 × 25 mm
- 4 layers127.8 × 56.1 mm
Controller
sudo-junkie/Controller
ESP32-based replacement PCB for UCOM USB game controller, with LCD, IMU, IR TX/RX and more...
105 parts1 - 4 layers71 × 150.5 mm
- 2 layers100 × 116 mm
Custom macropad
hossainmahmudchowdhury-boop/20-key-macropad
A small 20-key MacroPad built around the Seeeduino XIAO microcontroller. It has a custom circuit board. The MacroPad has 20 keys in a 4×5 grid.
115 parts - 2 layers103 × 86.5 mm
Input-16--module
sillevl/spha-btni-hardware
SPHA 16-channel input module with microcontroller, input/output circuitry, and CAN connectivity.
112 parts - 2 layers103 × 86.5 mm
Relay module light
sillevl/spha-rel6-hardware
Open the .kicadpro file in KiCad. The design includes files originating from an older KiCad workflow; review schematic links, footprints, design rules, zones, and manufacturing outputs after any conversion or upgrade.
70 parts
Questions
How big is the Linear MVP3 PCB?
It measures 25.5 × 157.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Linear MVP3 use?
43 parts, built around the TCA9555RTWR(UMW). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Linear MVP3 KiCad files?
From the borgel/bolton_buttons repository on GitHub, at the commit this page was made from: the board is mvp3/Linear-MVP3/Linear-MVP3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Linear MVP3 design in my own project?
Its repository publishes it under the MPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).