

SparkFun HX711 Load Cell
- Size
- 30.5 × 22.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 18
- Pads
- 65
- Tracks, vias
- 98, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 25 Feb 2020
- Updated
- 6 Mar 2021
Overview
SparkFun HX711 Load Cell is an open-source printed circuit board by bols-blue-org, from the bols-blue-org/Kicad-project repository on GitHub. It is a 2-layer board of 30.5 × 22.9 mm with 30 parts on 18 nets, routed with 98 tracks and 5 vias.
It is built around the HX711 and MMBT4403. Its parts include 7 capacitors, 5 resistors, 2 ICs, 2 connectors and 1 transistor. It belongs with the sensors and measurement boards of this library.
Main components
2HX711
SOP-16-40℃~+85℃ 1.4mA 10Hz、80Hz 1MHz~20MHz、11.0592MHz 2 2.6V~5.5V 20mV、40mV、80mV 24 Built-in External、Built-in SPI Support Yes SOP-16 Analog to Digital Converters (ADC) ROHSAvia SemiconAnalog To Digital Converters (ADC)MMBT4403
SOT-23-55℃~+150℃ 1 PNP 100 100nA 200MHz 300mW 400mV 40V 5V 600mA PNP SOT-23 Bipolar (BJT) ROHShongjiachengBipolar (BJT)
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF | SparkFun_HX711_Load_Cell:0603-CAP | C1, C2, C3, C4, C5 |
| 4 | STAND-OFF | SparkFun_HX711_Load_Cell:STAND-OFF | STANDOFF1, STANDOFF2, STANDOFF3, STANDOFF4 |
| 2 | 100 | SparkFun_HX711_Load_Cell:0603-RES | R3, R4 |
| 2 | 10uF | SparkFun_HX711_Load_Cell:1210 | C6, C7 |
| 2 | FIDUCIAL1X2 | SparkFun_HX711_Load_Cell:FIDUCIAL-1X2 | FID1, FID2 |
| 2 | M05PTH | SparkFun_HX711_Load_Cell:1X05 | J1, JP4 |
| 1 | 10K | SparkFun_HX711_Load_Cell:0603-RES | R5 |
| 1 | 20k | SparkFun_HX711_Load_Cell:0603-RES | R1 |
| 1 | 3.3uH | SparkFun_HX711_Load_Cell:0805 | L1 |
| 1 | 8.2K | SparkFun_HX711_Load_Cell:0603-RES | R2 |
| 1 | FRAME-LETTER | SparkFun_HX711_Load_Cell:CREATIVE_COMMONS | FRAME1 |
| 1 | HX711 | SparkFun_HX711_Load_Cell:SO16 | U1 |
| 1 | JUMPER-PAD-2-NC_BY_TRACE | SparkFun_HX711_Load_Cell:PAD-JUMPER-2-NC_BY_TRACE_YES_SILK | SJ2 |
| 1 | M02PTH | SparkFun_HX711_Load_Cell:1X02 | JP2 |
| 1 | MMBT4403 | SparkFun_HX711_Load_Cell:SOT23-3 | Q1 |
| 1 | OSHW-LOGOS | SparkFun_HX711_Load_Cell:OSHW-LOGO-S | U7 |
| 1 | REVISION | SparkFun_HX711_Load_Cell:REVISION | U$1 |
| 1 | SFE_LOGO_FLAME.1_INCH | SparkFun_HX711_Load_Cell:SFE_LOGO_FLAME_.1 | LOGO3 |
| 1 | SFE_LOGO_NAME_FLAME.1_INCH | SparkFun_HX711_Load_Cell:SFE_LOGO_NAME_FLAME_.1 | LOGO1 |
More from bols-blue-org/Kicad-project
5- 2 layers46 × 27 mm

- 2 layers65 × 56 mm

- 2 layers61 × 37 mm

- 2 layers

- 2 layers

Similar boards
- 4 layers81.2 × 81.2 mm

- 2 layers68 × 81.5 mm

- 2 layers65 × 45 mm

Bb kicad
FilMarini/bigbanger
An ESP32-based Bluetooth-enabled scaling device for climbing training,compliant with the Tindeq Progressor API, with firmware available in Micropython or Rust.
57 parts10Apache-2.0 - 2 layers101.2 × 89.2 mm

HX711
SolderedElectronics/Load-cell-ampfilier-HX711-board-hardware-design
Hardware design, BOM, gerbers and 3D files for Load-cell-ampfilier-HX711-board designed by Soldered Electronics.
580 parts8 - 2 layers48 × 32 mm

Mito
jvasilakes/mito
A tiny, cheap, hackable, completely open-source force gauge for isometric finger strength training.
31 parts6 - 4 layers90.6 × 58.1 mm

EcoApi pcb
EcoApi/EcoApi_BeeHiveMonitoring
describ options with 0R resistors. etc ...
179 parts4GPL-3.0 - 4 layers75 × 100 mm

Test rig black box
callumsnowden/aero21412_test_rig
AERO21412 Avionics Coursework 1 – Wind Tunnel Test Rig "Black Box"
102 parts1MIT - 2 layers83.8 × 61 mm

Thrust v2
jmajew/thrust_tool
DIY tool for measurements of thrust, torque, etc., of an electric motor with propeller
187 parts1GPL-3.0
Questions
How big is the SparkFun HX711 Load Cell PCB?
It measures 30.5 × 22.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SparkFun HX711 Load Cell use?
30 parts, built around the HX711 and MMBT4403. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SparkFun HX711 Load Cell KiCad files?
From the bols-blue-org/Kicad-project repository on GitHub, at the commit this page was made from: the board is loadcell2/SparkFun_HX711_Load_Cell.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the SparkFun HX711 Load Cell design in my own project?
Its repository states no licence, so its author keeps all rights: ask bols-blue-org before reusing the design.