

Mod synth kick
Modular Synth PCBs and Firmware
- Size
- 41.9 × 109.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 42
- Pads
- 124
- Tracks, vias
- 209, 0
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 Jun 2019
- Updated
- 27 Sep 2019
Overview
Mod synth kick is an open-source printed circuit board by bobbarnes1981, from the bobbarnes1981/mod_synth repository on GitHub. It is a 2-layer board of 41.9 × 109.2 mm with 41 parts on 42 nets, routed with 209 tracks and 0 vias.
It is built around the LM358 and BC547. Its parts include 15 resistors, 10 capacitors, 7 connectors, 3 diodes and 2 transistors. It belongs with the audio and music boards of this library.
Main components
2README
README.mdmod_synth
Modular Synth
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100nf | Capacitor_THT:C_Disc_D9.0mm_W2.5mm_P5.00mm | C2, C3, C4, C5, C7, C8 |
| 2 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6, R7 |
| 2 | 10uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C9, C10 |
| 2 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 2 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R9 |
| 2 | 470k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R12 |
| 2 | 47k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R11 |
| 2 | 4k7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R13 |
| 2 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | Conn_01x05_Female | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J4, J5 |
| 2 | Conn_01x05_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J6, J7 |
| 1 | 100k (Decay) | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHoles | RV2 |
| 1 | 100nf to 1uf | Capacitor_THT:C_Disc_D9.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 10k (Freq) | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHoles | RV1 |
| 1 | 10uf - 100uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C6 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15 |
| 1 | 1m | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R10 |
| 1 | Conn_02x08_Odd_Even | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J3 |
| 1 | LED | LED_THT:LED_D5.0mm | D3 |
| 1 | LM358 | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U1 |
| 1 | Out | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J2 |
| 1 | SW_Push | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | Trigger | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1 |
| 1 | original 220 (4k7 or 10k) | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R14 |
More from bobbarnes1981/mod_synth
12- 2 layers141 × 109.2 mm

- 2 layers62.2 × 109.2 mm

- 2 layers62.2 × 109.2 mm

- 2 layers50.8 × 109.2 mm

- 2 layers81.9 × 109.2 mm

- 2 layers62.2 × 109.2 mm

- 2 layers41.9 × 109.2 mm

- 2 layers62.2 × 109.2 mm

- 2 layers62.2 × 109.2 mm

- 2 layers38.1 × 109.2 mm

- 2 layers41.3 × 109.2 mm

- 2 layers

Similar boards
- 2 layers132.1 × 45.7 mm

IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers76 × 100 mm

Vclfo10
EchelonForce/vclfo10
A Eurorack LFO design based on the Electric Druid VCLFO10 chip.
139 parts7 - 2 layers123.8 × 99.7 mm

- 2 layers206.2 × 138.1 mm

- 2 layers38 × 100 mm

Vca as3360-circuit
fledsbo/Modules
Eurorack module designs using KiCad — VCO, VCF, VCA, ADSR, and Daisy Seed
74 parts3 - 2 layers55 × 485 mm

- 2 layers100.6 × 50 mm

Display unit2
erdemcanaz/EE313-Term-project
Semanur and I are university students at METU EE, and we are lab partners at an analog laboratory course abbreviated as EE313. In this course, we do predetermined experiments on analog circuits (mainly amplifiers).
45 parts1 - 2 layers100 × 85 mm

Questions
How big is the Mod synth kick PCB?
It measures 41.9 × 109.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mod synth kick use?
41 parts, built around the LM358 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mod synth kick KiCad files?
From the bobbarnes1981/mod_synth repository on GitHub, at the commit this page was made from: the board is mod_synth_kick/schematic/mod_synth_kick.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mod synth kick design in my own project?
Its repository states no licence, so its author keeps all rights: ask bobbarnes1981 before reusing the design.