
Program counter
bmichini/nandirl
Real-life open hardware implementation of the nand2tetris “Hack” computer

Real-life open hardware implementation of the nand2tetris “Hack” computer
Alu is an open-source printed circuit board by bmichini, from the bmichini/nandirl repository on GitHub. It is a 4-layer board of 207 × 132.1 mm with 293 parts on 782 nets, routed with 7,793 tracks and 1,213 vias.
It is built around the SN74ALVC00D. Its parts include 166 ICs, 59 resistors, 57 diodes, 6 capacitors and 2 transistors.
Project documentation can be found at bmichini.github.io/nandirl
The hardware design files and software tools found in this repository are open source and released under the Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 166 | SN74ALVC00 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U1, U10, U11, U100, U101, U102, U103, U104, U105, U106, U107, U108, U109, U110, U111, U112 +150 |
| 57 | 1K | Resistor_SMD:R_1206_3216Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +41 |
| 57 | LED | LED_THT:LED_D5.0mm | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +41 |
| 3 | 100nF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C3, C4, C6 |
| 3 | 100uF | Capacitor_THT:CP_Radial_D8.0mm_P2.50mm | C1, C2, C5 |
| 2 | 5k | Resistor_SMD:R_1206_3216Metric | R58, R59 |
| 2 | Q_NPN_Darlington_BEC | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | DB25_Male | Connector_Dsub:DSUB-25_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J3 |
| 1 | DB37_Male | Connector_Dsub:DSUB-37_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J4 |
| 1 | LOGO | nandirl logo:logo_sm | G*** |

bmichini/nandirl
Real-life open hardware implementation of the nand2tetris “Hack” computer

bmichini/nandirl
Real-life open hardware implementation of the nand2tetris “Hack” computer

bmichini/nandirl
Real-life open hardware implementation of the nand2tetris “Hack” computer

bmichini/nandirl
Real-life open hardware implementation of the nand2tetris “Hack” computer

bmichini/nandirl
Real-life open hardware implementation of the nand2tetris “Hack” computer

bmichini/nandirl
Real-life open hardware implementation of the nand2tetris “Hack” computer

bmichini/nandirl
Real-life open hardware implementation of the nand2tetris “Hack” computer


xtech/hw-openmower-yardforce
This repository contains the design files for a custom mainboard specifically designed for converting YardForce mowers to OpenMower

andymartell/Prius-STM32-DC-Motor-Contoller
STM32 based DC Motor Controller using Prius Gen 3 hardware



Pgr18/CELL_Z_SPECT_hardware
Печатные платы для проекта клеточной импедансной спектроскопии

jrseti/roboclaw-cm4-dc-dish-controller
Satellite dish controller using a ROBOCLAW-2X15A-OEM controlled by a Raspberry Pi CM4 module. Powered by DC battery.

It measures 207 × 132.1 mm and has 4 copper layers, 1.6 mm thick.
293 parts, built around the SN74ALVC00D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bmichini/nandirl repository on GitHub, at the commit this page was made from: the board is hardware/alu/alu.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bmichini before reusing the design.