2 layers134.9 × 48.5 mm
2 layers63.2 × 47.5 mm
CoolSWITCH Kicad
bluetiger9/CoolSWITCH8Wireless High Power Smart Switch
- Size
- 63.2 × 47.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 32
- Pads
- 212
- Tracks, vias
- 484, 26
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 22 Jan 2019
- Updated
- 1 Dec 2022
Overview
CoolSWITCH Kicad is an open-source printed circuit board by bluetiger9, from the bluetiger9/CoolSWITCH repository on GitHub, published under the MIT licence. It is a 2-layer board of 63.2 × 47.5 mm with 30 parts on 32 nets, routed with 484 tracks and 26 vias.
It is built around the IE1203S, 1EDI20I12MFXUMA1 and TLI4970D050T4XUMA1, with the IPT60R028G7 among its other parts. Its parts include 9 resistors, 7 connectors, 5 capacitors and 1 IC. It belongs with the ESP8266 boards of this library.
Main components
4IE1203S
SIP,11.7x6mm1 10.8V~13.2V 1W 1kV 3.3V 300mA 72% SIP,11.7x6mm Isolated Power Modules ROHSXP PowerIsolated Power Modules
1EDI20I12MFXUMA1
SOIC-8Gate DriversInfineon Technologies
TLI4970D050T4XUMA1
TISON-8(7x7)Overcurrent Protection、Bidirectional detection TISON-8(7x7) Current Sensors ROHSInfineon TechnologiesCurrent Sensors
IPT60R028G7
PG-HSOF-8HSOF-8 MOSFETs ROHSInfineon TechnologiesMOSFETs
README
README.mdCoolSWITCH
Project structure
- CoolSWITH-Kicad - Kicad project: schematics + PCB
- CoolSwitch - Arduino project
- Smashing-Dashboard - Smashing demo dashboard
- MQTT-Grafana - Grafana demo dashboard
- coolSwitchClient.py - secure HTTP client
License:
- code: MIT
- kicad design: CC BY-NC-SA
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10k | Resistor_SMD:R_0805_2012Metric | R4, R5, R6, R7, R8, R9, R10 |
| 3 | 100n | Capacitor_SMD:C_0805_2012Metric | C5, C8, C10 |
| 2 | 599V | Varistor:RV_Disc_D7mm_W5.1mm_P5mm | RV1, RV2 |
| 2 | IPT60R028G7 | CoolMosFootprintLib:Infineon_PG-HSOF-8-1_ThermalVias_fixed | CoolMOS1, CoolMOS2 |
| 1 | |||
| 1 | 100u | Capacitor_SMD:CP_Elec_6.3x5.4 | C9 |
| 1 | 1EDI20I12MFXUMA1 | CoolMosFootprintLib:SOIC127P600X175-8N | 1EDI |
| 1 | 1uF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 24 ohm (.5W) | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | 48 ohm (.5W) | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | CTRL_IN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Direct_Ctrl | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | ESP-12E_2 | CoolMosFootprintLib:ESP-12E_2 | U2 |
| 1 | IE1203S | CoolMosFootprintLib:IE1224S-H | PS1 |
| 1 | LOAD | CoolMosFootprintLib:TerminalBlock_bornier-2_P5.08mm | J5 |
| 1 | POWER | CoolMosFootprintLib:TerminalBlock_bornier-3_P5.08mm | J4 |
| 1 | PS_IN | CoolMosFootprintLib:MicroMatch-7-215079-4_1 | J8 |
| 1 | PS_OUT | CoolMosFootprintLib:MicroMatch-215464-4 | J7 |
| 1 | Prog | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
| 1 | TLI4970D050T4XUMA1 | CoolMosFootprintLib:PG-TISON-8-1 | TLI4970 |
Questions
How big is the CoolSWITCH Kicad PCB?
It measures 63.2 × 47.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CoolSWITCH Kicad use?
30 parts, built around the IE1203S, 1EDI20I12MFXUMA1, TLI4970D050T4XUMA1 and IPT60R028G7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CoolSWITCH Kicad KiCad files?
From the bluetiger9/CoolSWITCH repository on GitHub, at the commit this page was made from: the board is CoolSWITCH-Kicad/main-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CoolSWITCH Kicad design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from bluetiger9/CoolSWITCH
1Similar boards
- 2 layers52.2 × 52.2 mm
Base promicro
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
30 parts3kApache-2.0 - 2 layers40.6 × 15.2 mm
- 2 layers270 × 11 mm
Daylight
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
30 parts1.1kGPL-3.0 - 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
30 parts1kGPL-3.0 - 2 layers40.5 × 58 mm
Initial v
tenderlove/initial-v
It's a BMW shifter converted to a Bluetooth Keyboard that you use with Vim
30 parts1kApache-2.0 - 2 layers34.3 × 41.8 mm
MotionCubeViewAllForces
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
30 parts915 - 2 layers57.4 × 62 mm
- 2 layers52.1 × 46.8 mm
