
Usb power board
bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.
Debug adapter is an open-source printed circuit board by bluesatunsw, from the bluesatunsw/owr repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 23.6 × 14 mm with 9 parts on 15 nets, routed with 45 tracks and 7 vias.
It belongs with the interfaces and adapters boards of this library.
A device which provides and monitors regulated rails for communications (passive 24V POE), computing (19V), cameras (12V) and lighting (5V) devices. It complies with the common device specification 2025-04.
Output to each rail can be switched.
The output current and voltage of each rail is monitored.
The 19V, 12V and 5V rails are generated by TPS54560 buck regulators (designs documented with Excel spreadsheets from TI). Each of these rails should be able to deliver 5A. A TPS61175 regulator is used to generate the 24V 1A POE rail.
The high current 5V and 12V rails replace the regular rails in the common device specification.
Power input for the CPH is provided via a male XT30 connector. The 19V and 12V rails are output to 2-pin JST VH headers, limited to 5A and 4A respectively. LED power is sent to four ARGB (WS2812) ports with a 3-pin JST PA header, limited to 1A each.
The board has a pair of RJ45 sockets, the Ethernet signal is passed between these ports with a POE power injected into one of the ports.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | TestPoint | TestPoint:TestPoint_Pad_D2.0mm | 3V3, GND, NRST, SWCLK, SWDIO, SWO |
| 1 | Conn_01x10 | Connector_JST:JST_SH_SM10B-SRSS-TB_1x10-1MP_P1.00mm_Horizontal | J3 |
| 1 | Conn_02x03_Odd_Even | Bluesat:IDC6 | J1 |
| 1 | Conn_02x05_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J2 |

bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.
bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.

bluesatunsw/owr
This repo includes all software necessary to operate the Test Rover Platform that is being designed and developed in the 502 project.



FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!



adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
It measures 23.6 × 14 mm and has 2 copper layers, 1.6 mm thick.
9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bluesatunsw/owr repository on GitHub, at the commit this page was made from: the board is src/debug_adapter_elec/debug_adapter.kicad_pcb and its schematic src/VH4_extender_elec/VH4_extender.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).