
HVA
blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
PSC is an open-source printed circuit board by blue-wind-25, from the blue-wind-25/JxMake repository on GitHub. It is a 2-layer board of 94 × 75.7 mm with 79 parts on 63 nets, routed with 340 tracks and 68 vias.
It is built around the IRLML6402, BSS138 and SS24. Its parts include 30 resistors, 14 transistors, 10 diodes, 9 capacitors and 7 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

JxMake is primarily licensed under LGPL v3+.
Copies of the licenses for third-party libraries/components included in this repository are located in the 3rd_party_library_licenses directory. Please refer to individual sub-directories of the libraries/components for specific author credits and copyright headers.
JxMake is a Java-based cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.
Additionally, JxMake supports several features not typically found in other console-based build systems, including a simple built-in GUI, a serial console, a serial plotter, and integrated programmers for some commonly used MCUs. The JxMake repository also includes hardware schematics and PCB designs ranging from simple to moderately complex, covering generic GPIO, basic programmers, and various tools.
Building JxMake requires Java SDK 8 or later (note that Java SDK 8 is an LTS version).
This project is mirrored on both SourceForge and GitHub:
Please refer to the JxMake usage page (run it with the -h or --browse-docs option) for how to
use the program.
Please refer to docs/*.txt, test/*.jxm, and test/src/*/JxMakeFile for the scripting language
syntax and examples.
All preprocessed *.java files generated from their corresponding *.java.in files (and
optionally some *.java.inc files) are preprocessed using PCPP (3rd_party/tools/pcpp/pcmd.py)
and GNU sed.
Currently, JxMake's loadable libraries (build scripts) are primarily focused on embedded systems development. Future updates will enhance support for building desktop applications. However, please note that these libraries are quite basic, so you may prefer to create custom libraries tailored to your projects.
If you like this software (or part of this software), please consider donating to:
PayPal: aloysius.indrayanto@gmail.com
to support the software development.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R10, R11, R12, R14, R16, R17, R19, R20, R22, R23, R25, R26, R27, R28 +2 |
| 12 | IRLML6402 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12 |
| 8 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3, D4, D5, D6, D7, D8, D9, D10 |
| 7 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder | C1, C2, C3, C6, C7, C8, C9 |
| 6 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R15, R18, R21, R24 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R13 |
| 2 | 1R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R29, R30 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R9 |
| 2 | ATtiny44A/84A/441/841-SS | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1, U2 |
| 2 | AVR-ISP6 | Connector_IDC:IDC-Header_2x03_P2.54mm_Horizontal | J3, J5 |
| 2 | BSS138 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q13, Q14 |
| 2 | EN_ISP_V | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | Power_In_Out | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J2, J2R |
| 2 | Power_In_Out | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J1, J1R |
| 2 | RST | Button_Switch_SMD:SW_SPST_CK_RS282G05A3 | SW1, SW2 |
| 2 | SS24 | Diode_SMD:D_SMA_Handsoldering | D1, D2 |
| 1 | 1.5A | Resistor_SMD:R_4020_10251Metric_Pad1.65x5.30mm_HandSolder | F1 |
| 1 | Buck-Boost Attachment | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J4 |
| 1 | Bypass | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | Longer_Delay | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |

blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.

blue-wind-25/JxMake
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake.


jayanta525/dual-h-bridge
Dual H-Bridge Controller with IRF3205 and IR2104 MOSFET Driver, and with ATMega328P-AU PWM Controller

Alksndr55/mesh-repeater
Mesh Repeater v1 — одноплатный LoRa-репитер для MeshCore и Meshtastic, 90×100 мм. Упор на максимальное энергосбережение и работу в суровых сибирских зимах. Солнечный зарядник, Na-ion 1S / LTO 2S.



lachlanA/eagle-to-kicad
Eagle SCH/LIB to KiCad SCH/LIB ULP conversion script

Horizon-Avionics/Horizon-H1
Building a fully open-source flight computer for amateur rocketry!

It measures 94 × 75.7 mm and has 2 copper layers, 1.6 mm thick.
79 parts, built around the IRLML6402, BSS138 and SS24. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the blue-wind-25/JxMake repository on GitHub, at the commit this page was made from: the board is hardware/Tools/KiCad8/Power_Supply_Control/PSC.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask blue-wind-25 before reusing the design.