4 layers91 × 53.1 mm
Nff pcb
o7-machinehum/flipper-blackhat
Linux based WiFi pentesting device for the Flipper Zero.
184 parts300
2 layers20.8 × 33 mm
OpenUSB2Serial
blark/OpenUSB2Serial2An open source USB to TTL serial adapter
- Size
- 20.8 × 33 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 23
- Pads
- 70
- Tracks, vias
- 125, 15
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 1 Jun 2020
- Updated
- 1 Jun 2020
Overview
OpenUSB2Serial is an open-source printed circuit board by blark, from the blark/OpenUSB2Serial repository on GitHub. It is a 2-layer board of 20.8 × 33 mm with 13 parts on 23 nets, routed with 125 tracks and 15 vias.
It is built around the CH340C. Its parts include 6 capacitors, 2 resistors, 2 ICs and 2 connectors. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdOpenUSB2Serial
An open source USB to serial adapter based on the cheap CH340C IC.
You can get 3 of these boards from Oshpark for $5.35.
BOM
The BOM is here all passives are 805.
Sourcing parts:
USB-C connector
CH340C
AZ1117-3.3
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C3 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C5 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | AZ1117-3.3 | Package_TO_SOT_SMD:SOT-223 | U2 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | SERIAL | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | VSEL | Jumper:SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm | JP1 |
Questions
How big is the OpenUSB2Serial PCB?
It measures 20.8 × 33 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OpenUSB2Serial use?
13 parts, built around the CH340C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OpenUSB2Serial KiCad files?
From the blark/OpenUSB2Serial repository on GitHub, at the commit this page was made from: the board is OpenUSB2Serial.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the OpenUSB2Serial design in my own project?
Its repository states no licence, so its author keeps all rights: ask blark before reusing the design.
Similar boards
- 2 layers66.8 × 34 mm
- 2 layers13.7 × 21.4 mm
- 2 layers192.4 × 50 mm
- 2 layers84.2 × 52 mm
- 4 layers43 × 49 mm
- 2 layers36 × 58 mm
Ups adaptor
aronreid/ups-to-esp32
Put a USB-only UPS on the network: an ESP32-S3 board and firmware that serves NUT on TCP 3493, with a web UI. No host computer, no Raspberry Pi.
38 parts130GPL-3.0 - 2 layers85 × 56 mm
