2 layers
Flowcontrol
bl433/flow-control
Solenoid valve manager with variable input, master control, and flow rate feedback.
54 partsMIT
2 layers
Flowcontrol old
bl433/flow-controlSolenoid valve manager with variable input, master control, and flow rate feedback.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 29
- Nets
- 88
- Pads
- 158
- Tracks, vias
- 90, 14
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Sep 2024
- Updated
- 23 Dec 2024
Overview
Flowcontrol old is an open-source printed circuit board by bl433, from the bl433/flow-control repository on GitHub, published under the MIT licence. It is a 2-layer board with 29 parts on 88 nets, routed with 90 tracks and 14 vias.
It is built around the ATMEGA328-PU and XL1509-3.3. Its parts include 10 resistors, 6 switches, 4 ICs, 4 diodes and 2 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
XL1509-3.3
SOP-8-40℃~+125℃@(TJ) 1 150kHz 2A 2mA 3.3V 4.5V~40V Buck Buck Built-in Fixed No SOP-8 DC-DC Converters ROHSUMWDC-DC Converters
README
README.mdflow-control
Solenoid valve manager with PWM-styled energizing, master control, and possible flow rate feedback.
- Nozzle sizes are 3/4", meant for standard purpose garden hoses.
- Intended to be powered by a 12V 2A power supply.
- Solenoids are connected to the bottom of the valve manager through a 2-pin socket.
This repository is intended for the NJIT ECET-430 course.
Parts
29| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R2, R3 |
| 2 | 10kO | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R4, R5 |
| 2 | 1kO | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1, R6 |
| 2 | 220 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1LED_G1, R2LED_G1 |
| 2 | R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1LED_R1, R2LED_R1 |
| 1 | ATmega328-P | Package_DIP:DIP-28_W7.62mm | UC1 |
| 1 | SOL1_AND_2 SPLIT | Package_DIP:DIP-28_W7.62mm | U3 |
| 1 | SOL1_DELAY | Rotary_Encoder:RotaryEncoder_Alps_EC11E_Vertical_H20mm | SW4 |
| 1 | SOL1_DISP | Display_7Segment:CA56-12SRWA | U1 |
| 1 | SOL1_DURA | Rotary_Encoder:RotaryEncoder_Alps_EC11E_Vertical_H20mm | SW3 |
| 1 | SOL1_GRN | LED_THT:LED_Oval_W5.2mm_H3.8mm | D5 |
| 1 | SOL1_MASTER | Button_Switch_THT:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfile | SW9 |
| 1 | SOL1_NFET | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | SOL1_PORT | Connector_PinSocket_2.00mm:PinSocket_1x02_P2.00mm_Vertical | J3 |
| 1 | SOL1_RED | LED_THT:LED_Oval_W5.2mm_H3.8mm | D6 |
| 1 | SOL2_DELAY | Rotary_Encoder:RotaryEncoder_Alps_EC11E_Vertical_H20mm | SW6 |
| 1 | SOL2_DISP | Display_7Segment:CA56-12SRWA | U2 |
| 1 | SOL2_DURA | Rotary_Encoder:RotaryEncoder_Alps_EC11E_Vertical_H20mm | SW5 |
| 1 | SOL2_GRN | LED_THT:LED_Oval_W5.2mm_H3.8mm | D3 |
| 1 | SOL2_MASTER | Button_Switch_THT:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfile | SW10 |
| 1 | SOL2_NFET | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | SOL2_PORT | Connector_PinSocket_2.00mm:PinSocket_1x02_P2.00mm_Vertical | J2 |
| 1 | SOL2_RED | LED_THT:LED_Oval_W5.2mm_H3.8mm | D4 |
| 1 | XL1509-3.3 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
Questions
What parts does the Flowcontrol old use?
29 parts, built around the ATMEGA328-PU and XL1509-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flowcontrol old KiCad files?
From the bl433/flow-control repository on GitHub, at the commit this page was made from: the board is hardware/kicad/flowcontrol/flowcontrol_old.kicad_pcb and its schematic hardware/flowcontrol redo.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flowcontrol old design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from bl433/flow-control
1Similar boards
- 2 layers155 × 80 mm
- 2 layers263.5 × 63.5 mm
Tobor
evezor/tobor_v00
Tobor (robot spelled backwards), was built to be the most versatile open-source robotics system
124 parts126CERN-OHL-P-2.0 - 4 layers285.1 × 48.1 mm
Ayab esp32
AllYarnsAreBeautiful/ayab-hardware
Contains the schematics and layouts for the AYAB Arduino shield
246 parts50CC-BY-SA-4.0 - 2 layers99.1 × 55.4 mm
ESP32 Plotter Controller revB1 unrouted
MarkJB/ESP32_Plotter_Controller
An ESP32/TMC2130 based 2 axis controller designed for pen plotters
53 parts9MIT - 4 layers89 × 58 mm
HALMET
hatlabs/HALMET-hardware
Hat Labs Marine Engine & Tank interface hardware design files
227 parts8CC-BY-4.0 - 2 layers43 × 43 mm
- 4 layers54.6 × 99.3 mm
- 4 layers70.5 × 128.5 mm
Pulsephone main board
pulseopen/PulsePhone
An almost fully modular open source phone running off of the DART-MX8M-MINI SoM.
94 parts2GPL-3.0