Skip to the content
2 layers78.7 × 74.9 mmCentral panel, the printed circuit board in 3D

Spaceship-like control panel for kids, based on Arduino

Size
78.7 × 74.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
40
Nets
34
Pads
112
Tracks, vias
361, 21
Pours
1
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
11 Apr 2021
Updated
26 Nov 2021

Overview

Central panel is an open-source printed circuit board by bitsandpixels-io, from the bitsandpixels-io/kids-control-panel repository on GitHub, published under the MIT licence. It is a 2-layer board of 78.7 × 74.9 mm with 40 parts on 34 nets, routed with 361 tracks and 21 vias.

It is built around the TM1637. Its parts include 14 diodes, 6 resistors, 4 capacitors, 2 ICs and 2 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

kids-control-panel

This project is a spaceship-like control panel toy for kids (of all ages) allowing to:

  • display characters from the alphanumeric keypad on the 7-segment display
  • turn on LEDs in the 8x8 matrix when keys are pressed on the 4x4 keypad
  • display some patterns using the 4-color LED bar
  • use four tactile buttons to switch modes of operation for joystick and encoder:
    • control the LED bar
    • control the RGB LED's color
    • control LEDs on the 8x8 matrix

Repository contains FreeCAD designs for the casing (inteded for wood laser cutters), KiCAD schematics for the electronics part, and code for Arduino Uno R3 board.

Control panel The casing Schematic

Parts

40
QtyValueFootprintReferences
12LEDLED_SMD:LED_0603_1608MetricD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12
6TestPointTestPoint:TestPoint_Plated_Hole_D2.0mmTP1, TP2, TP3, TP4, TP5, TP6
4220Resistor_SMD:R_0603_1608MetricR1, R2, R3, R4
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
2100pFCapacitor_SMD:C_0603_1608MetricC1, C2
210kResistor_SMD:R_0603_1608MetricR5, R6
2SW_SPST_LEDConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalSW1, SW2
1100uFCapacitor_SMD:C_1206_3216MetricC3
110nFCapacitor_SMD:C_0603_1608MetricC4
1Arduino_ConnConnector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_HorizontalJ4
1CA56-12EWADisplay_7Segment:CA56-12EWAU1
1Conn_01x06Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_HorizontalJ1
1LED_EN_ALED_SMD:LED_Inolux_IN-PI554FCH_PLCC4_5.0x5.0mm_P3.2mmD13
1LED_EN_BLED_SMD:LED_Inolux_IN-PI554FCH_PLCC4_5.0x5.0mm_P3.2mmD14
1TM1637Package_SO:SOP-20_7.5x12.8mm_P1.27mmU2

More from bitsandpixels-io/kids-control-panel

1
  • 2 layers68 × 65 mmKids control panel, the printed circuit board in 3D

    Kids control panel

    bitsandpixels-io/kids-control-panel

    Spaceship-like control panel for kids, based on Arduino

    4 parts1MIT

Similar boards

  • 2 layersOBDGauge, the printed circuit board in 3D

    OBDGauge

    tealvince/OBDGauge

    A custom configurable gauge for K-line OBD interfaces

    25 parts8GPL-2.0
  • 2 layers50 × 110 mmOgham merged v1.0, the printed circuit board in 3D

    Ogham merged v1.0

    keeos-io/ogham

    Ogham — a dual-voice bytebeat synthesizer for Eurorack. Firmware (MIT) and hardware (CC BY-SA 4.0).

    109 parts3
  • 2 layers62 × 58 mmArdustat, the printed circuit board in 3D

    Ardustat

    SeryiBaran/ardustat

    Термостат на Arduino

    16 parts2
  • 2 layers67 × 54 mmMp3alarm, the printed circuit board in 3D

    Mp3alarm

    fehlfarbe/ESP32-Alarm-clock

    This is an ESP32 based alarm clock that plays mp3 files from SD, webstreams or even FM radio. You can configure multiple alarms and add new songs to your sd card with a simple webinterface.

    69 parts1MIT
  • 2 layers43.8 × 21 mm036INCH 5DIGIT, the printed circuit board in 3D

    036INCH 5DIGIT

    galopago/panel-mount-7-segment-display

    Open source 7 segment serially controlled led display that fits inside a generic 45x26mm panel mount plastic enclosure. Upgrade your function specific panel meter PCB with a new one controllable by your preferred MCU.

    10 parts1MIT
  • 2 layers97 × 23.7 mmHomegreen Node Basic, the printed circuit board in 3D

    Homegreen Node Basic

    pmalessa/homegreen-Node

    The system is based on an inexpensive node, which is able to control up to 3 pumps and can be powered by nearly any conventional powerbank.

    67 parts1
  • 2 layers72 × 47.5 mmUsb 7seg, the printed circuit board in 3D

    Usb 7seg

    realglobe-Inc/usb_7seg

    Mac, LinuxマシンにUSBで接続できて追加ドライバ不要で表示できる7セグLED

    8 parts1
  • 2 layers112 × 48 mmRc v1, the printed circuit board in 3D

    Rc v1

    davidlim4318/Baseball-Machine

    MAE 156 Capstone Project Code Files

    30 parts

Questions

How big is the Central panel PCB?

It measures 78.7 × 74.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Central panel use?

40 parts, built around the TM1637. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Central panel KiCad files?

From the bitsandpixels-io/kids-control-panel repository on GitHub, at the commit this page was made from: the board is cad/central-panel/central-panel.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Central panel design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).