Skip to the content
2 layers67.3 × 86.4 mmBitraf hydroponics, the printed circuit board in 3D

Bitraf hydroponics

bitraf/bitraf-hydroponics1

TODO: Rearrange MOSFETs so they work as expected

Size
67.3 × 86.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
36
Nets
31
Pads
141
Tracks, vias
339, 2
Pours
2
Routed
Yes
KiCad
KiCad 4
Created
22 Sep 2016
Updated
9 Nov 2017

Overview

Bitraf hydroponics is an open-source printed circuit board by bitraf, from the bitraf/bitraf-hydroponics repository on GitHub, published under the MIT licence. It is a 2-layer board of 67.3 × 86.4 mm with 36 parts on 31 nets, routed with 339 tracks and 2 vias.

Its parts include 16 connectors, 4 capacitors, 4 resistors, 3 diodes and 3 transistors. It belongs with the home automation and IoT boards and the ESP8266 boards of this library.

README

board_1.1/README.md

TODO:

  • Rearrange MOSFETs so they work as expected

QUESTIONS:

  • Do we need the exra pins going to GND on rotary encoder and programing headers if we go for the jumper solution?

FEATURES:

  • Fuse for power ports?

DONE:

  • Added "0ohm" pull-up between VCC -> CH_PD
  • Added 10k pull-up between GPIO2 -> 3.3v
  • Added jumper connector to pull-down RESET and GPIO0 -> GND

Parts

36
QtyValueFootprintReferences
310kResistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3, R4, R5
3DDiodes_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2, D3
3Q_NMOS_GDSTO_SOT_Packages_THT:TO-220_VerticalQ1, Q2, Q3
2CCapacitors_THT:C_Disc_D3.0mm_W2.0mm_P2.50mmC2, C3
2CPCapacitors_THT:CP_Radial_D5.0mm_P2.50mmC1, C4
112V_PWRTerminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2polP1
15v_LDOTO_SOT_Packages_THT:TO-220_VerticalU2
1BREAKOUT_1-15Pin_Headers:Pin_Header_Straight_1x15_Pitch2.54mmP17
1BREAKOUT_16-30Pin_Headers:Pin_Header_Straight_1x15_Pitch2.54mmP18
1BUZZPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmP11
1I2C_1Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mmP2
1I2C_2Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mmP3
1I2C_3Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mmP4
1I2C_4Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mmP7
1LCDPin_Headers:Pin_Header_Straight_1x04_Pitch2.54mmP9
1LDRPin_Headers:Pin_Header_Straight_1x02_Pitch2.54mmP12
1MOS_OUT_1Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2polP14
1MOS_OUT_2Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2polP13
1MOS_OUT_3Terminal_Blocks:TerminalBlock_Pheonix_MKDS1.5-2polP15
1NodeMCU_1.0NodeMCU:NodeMCUU1
1RResistors_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
1ROT_BTNPin_Headers:Pin_Header_Straight_1x05_Pitch2.54mmP10
1Radio_433Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mmP8
1TEMP_HUMPin_Headers:Pin_Header_Straight_1x03_Pitch2.54mmP5

The 32 most common of 36 parts.

More from bitraf/bitraf-hydroponics

3
  • 2 layers100 × 50 mmBitraf hydroponics, the printed circuit board in 3D

    Bitraf hydroponics

    bitraf/bitraf-hydroponics

    TODO: Rearrange MOSFETs so they work as expected

    46 parts1MIT
  • 2 layers100 × 50 mmBitraf hydroponics, the printed circuit board in 3D

    Bitraf hydroponics

    bitraf/bitraf-hydroponics

    TODO: Rearrange MOSFETs so they work as expected

    44 parts1MIT
  • 2 layers67.3 × 86.4 mmBitraf hydroponics, the printed circuit board in 3D

    Bitraf hydroponics

    bitraf/bitraf-hydroponics

    TODO: Rearrange MOSFETs so they work as expected

    36 parts1MIT

Similar boards

  • 2 layers65 × 30 mmRgb to hdmi, the printed circuit board in 3D

    Rgb to hdmi

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    36 parts1kGPL-3.0
  • 2 layers55 × 70 mmArduino v1, the printed circuit board in 3D

    Arduino v1

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    36 parts915
  • 2 layers50.4 × 24.8 mmLEDboardRev3, the printed circuit board in 3D

    LEDboardRev3

    Architeuthis-Flux/Jumperless

    A jumperless breadboard

    36 parts914
  • 2 layers45.7 × 31.8 mmLEDx16 board, the printed circuit board in 3D

    LEDx16 board

    tardate/LittleArduinoProjects

    a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!

    36 parts803MIT
  • 2 layers32 × 24 mmEsp onelayer3, the printed circuit board in 3D

    Esp onelayer3

    cnlohr/colorchord

    Chromatic Sound to Light Conversion System

    36 parts712
  • 2 layers69 × 53.8 mmTUSS4470 shield, the printed circuit board in 3D

    TUSS4470 shield

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    36 parts530
  • 2 layers99.1 × 53.3 mmABSIS Mega, the printed circuit board in 3D

    ABSIS Mega

    jrsteensen/OpenHornet

    OpenHornet 1:1 F/A-18C Simulator Repository

    36 parts431
  • 2 layers16.1 × 119 mmConnectorL, the printed circuit board in 3D

    ConnectorL

    thpoll83/PolyKybd

    PolyKybd

    36 parts411CERN-OHL-W-2.0

Questions

How big is the Bitraf hydroponics PCB?

It measures 67.3 × 86.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Bitraf hydroponics use?

36 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Bitraf hydroponics KiCad files?

From the bitraf/bitraf-hydroponics repository on GitHub, at the commit this page was made from: the board is board_0.0.2/bitraf_hydroponics.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Bitraf hydroponics design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).