Skip to the content
2 layers70 × 35 mmSpeckle amp pcb rev2, the printed circuit board in 3D

Speckle amp pcb rev2

bitmorse/specklesensor1

A photodiode array for laser speckle sensing and vibrometry.

Size
70 × 35 mm
Copper layers
2
Thickness
1.6 mm
Parts
55
Nets
36
Pads
153
Tracks, vias
290, 464
Pours
10
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
9 Jan 2025
Updated
10 Jan 2025

Overview

Speckle amp pcb rev2 is an open-source printed circuit board by bitmorse, from the bitmorse/specklesensor repository on GitHub, published under the MIT licence. It is a 2-layer board of 70 × 35 mm with 55 parts on 36 nets, routed with 290 tracks and 464 vias.

It is built around the M50-3140545. Its parts include 21 resistors, 17 capacitors, 6 ICs, 3 connectors and 1 diode. It belongs with the audio and music boards of this library.

Main components

1

README

README.md

specklesensor

A photodiode array for laser speckle sensing and vibrometry.

Read the full paper here.

PCB Design

Spectral analysis of a 133 Hz surface vibration under different laser configurations. Top: Power spectral density showing the target frequency component. Bottom: SNR improvement with increasing number of active lasers:

Multilaser Spectrogram

RPI Camera Bench Setup

RPI Camera Bench Setup

Side by side comparison of the speckle pattern captured by a Raspberry Pi camera with one red laser

1 Red Laser

and three red lasers.

3 Red Lasers

Laser setups

Different Laser Setups produce different speckles

Hardware

The PCBs used for the experiments are in the hardware folder. The PCBs are designed using KiCad, an open source schematics and layout editor. The PCBs were manufactured by JLCPCB and hand assembled using hot air reflow.

  • speckle_pcb_rev1: The 3x3 photodiode array.
  • speckle_amp_pcb_rev1: The amplifier PCB for 3x3 array.

Careful attention must be paid to cleaning the PCBs after soldering, as any residue flux can lead to leakage currents and noise in the measurements.

Scripts

  • emulations: The script to process camera frames to CSV files for emulating the photodiode array. A notebook provides the signal processing.
  • waveshare: Scripts for testing the first ADC.
  • daqhat: Scripts for testing the second ADC and data from the multi-laser experiment.

Parts

55
QtyValueFootprintReferences
10100Mlib_fp:RESC3216X69NR1, R5, R6, R7, R8, R9, R10, R11, R12, R22
1010kResistor_SMD:R_0603_1608MetricR13, R14, R15, R16, R17, R18, R19, R20, R21, R24
1010nCapacitor_SMD:C_0603_1608MetricC11, C12, C13, C14, C15, C16, C17, C18, C19, C21
51uCapacitor_SMD:C_0603_1608MetricC22, C23, C24, C25, C26
5OPA2380AIDGKTG4lib_fp:SOP65P490X110-8NIC1, IC2, IC3, IC4, IC5
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_DIN965_PadH1, H2, H3, H4
3TestPointTestPoint:TestPoint_Pad_D1.0mmTP1, TP2, TP3
20.1uCapacitor_SMD:C_0603_1608MetricC1, C2
2M50-3140545lib_fp:M503140545J1, J2
1100kResistor_SMD:R_0603_1608MetricR4
1ADR130BUJZ-R2lib_fp:SOT95P280X100-6NIC6
1Conn_01x12_PinConnector_PinHeader_1.27mm:PinHeader_1x12_P1.27mm_HorizontalJ3
1D_Testlib_fp:VEMD2704D1

More from bitmorse/specklesensor

3
  • 2 layersBelice dot projector, the printed circuit board in 3D

    Belice dot projector

    bitmorse/specklesensor

    A photodiode array for laser speckle sensing and vibrometry.

    12 parts1MIT
  • 2 layers12.5 × 12.5 mmSpeckle pcb rev1, the printed circuit board in 3D

    Speckle pcb rev1

    bitmorse/specklesensor

    A photodiode array for laser speckle sensing and vibrometry.

    11 parts1MIT
  • 2 layersDot projector, the printed circuit board in 3D

    Dot projector

    bitmorse/specklesensor

    A photodiode array for laser speckle sensing and vibrometry.

    7 parts1MIT

Similar boards

  • 2 layers229.5 × 95.1 mmSweep high, the printed circuit board in 3D

    Sweep high

    davidphilipbarr/Sweep

    Sweep - a small promicro based keyboard inspired by the Ferris.

    55 parts2.1k
  • 2 layers370 × 11 mmDaylight Disco XXL, the printed circuit board in 3D

    Daylight Disco XXL

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    55 parts1.1kGPL-3.0
  • 2 layers370 × 10 mmE3NGLEDstick, the printed circuit board in 3D

    E3NGLEDstick

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    55 parts915
  • 2 layers139.3 × 94.8 mmFlake, the printed circuit board in 3D

    Flake

    lever-tech/flake

    An open-source, wireless, split ergonomic keyboard designed to be productive, healthy, and enjoyable. [formerly Anywhy Flake]

    55 parts531CERN-OHL-W-2.0
  • 2 layers237.5 × 102.9 mmMemory, the printed circuit board in 3D

    Memory

    jes/scamp-cpu

    A homebrew 16-bit CPU with a homebrew Unix-like-ish operating system.

    55 parts301Unlicense
  • 2 layers60.6 × 24.1 mmBlep hackerboard, the printed circuit board in 3D

    Blep hackerboard

    CRImier/MyKiCad

    My KiCad boards. Can't be bothered uploading individually anymore, so here you go.

    55 parts253GPL-3.0
  • 2 layers100 × 96.5 mmKeyboard ch552-36-lhs, the printed circuit board in 3D

    Keyboard ch552-36-lhs

    rgoulter/keyboard-labs

    Repo with my PCB designs and keyboard firmware

    55 parts236
  • 2 layers190.5 × 85.7 mmDissatisfaction30, the printed circuit board in 3D

    Dissatisfaction30

    dcpedit/dissatisfaction30

    To get the PCB manufactured, upload dissat-pcb.zip to JLCPCB, select your desired PCB color while keeping all the other default options, and place your order (minimum 5).

    55 parts147CC-BY-4.0

Questions

How big is the Speckle amp pcb rev2 PCB?

It measures 70 × 35 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Speckle amp pcb rev2 use?

55 parts, built around the M50-3140545. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Speckle amp pcb rev2 KiCad files?

From the bitmorse/specklesensor repository on GitHub, at the commit this page was made from: the board is hardware/speckle_amp_pcb_rev2/speckle_amp_pcb_rev2.kicad_pcb and its schematic hardware/belice_dot_projector/belice_dot_projector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Speckle amp pcb rev2 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).