
SimonShield
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

Fluvius smart meter project
Esp32-dmsr is an open-source printed circuit board by binomaiheu, from the binomaiheu/fluvius-smart-meter repository on GitHub. It is a 2-layer board of 114.9 × 60 mm with 22 parts on 43 nets, routed with 86 tracks and 0 vias.
It is built around the BC547. Its parts include 6 resistors, 4 capacitors, 3 connectors, 2 ICs and 1 diode. It belongs with the ESP32 boards of this library.
This is my version of a readout board for the Belgian smart energy meter deployed by Fluvius. The device contains 2 ports which allow the interested hobbyist to read out the real time energy consumption every sectond P1 and the full 4kHz waveform via the S1 port. This repo is for my own education as I shamelessly copied and adapted the work of Matthijs Kooijman and Willem Aandwiel, see links below for the originals !
Below is a collection of references with the original material upon which I based this original project :
And a few links on github :
You can find a python decoder for the serial messages here :
The specs for the smart meter can be found here :
The Fluvius meter P1 port uses an RJ12 connector with the following pinout.
| pin | function |
|---|---|
| 1 | Power +5 V |
| 2 | Data Request |
| 3 | Data GND |
| 4 | n.c. |
| 5 | Data line |
| 6 | Power GND |
The protocol is serial TTL between 0 and 5 V, but with polarity reversed, meaning that 5V indicates a 0 and 0V indicates a 1.
The circuit in the kicad/ subfolder is essentially based on the work of Willem Aandewiel (https://opencircuit.nl/blog/Slimme-meter-uitlezer) with some modifications of my own whilst getting to know KiCad.
I'm using a Lolin D32 ESP board (https://www.wemos.cc/en/latest/d32/index.html) to readout & process the telegrams. For the footprint i installed the following library in KiCad :
This contains both the schematic as well as the footprint for the Lolin D32 board.
See :
For powering the esp32 I found this post on reddit : https://www.reddit.com/r/esp32/comments/bwgn1q/how_to_power_a_lolin_d32_externally_from_a_dc/, it presents 3 options (copy pasted):
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | , , , |
| 2 | 2.2 kOhm | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R2, R3 |
| 2 | 220 Ohm | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R4, R6 |
| 1 | 1 kOhm | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R1 |
| 1 | 1 µF | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C2 |
| 1 | 10 Ohm | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal | R5 |
| 1 | 1000 µF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 2.2 µF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C4 |
| 1 | 220 µF | Capacitor_THT:CP_Radial_D7.5mm_P2.50mm | C3 |
| 1 | 4N35 | Package_DIP:DIP-6_W7.62mm | U2 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | ESP32 Power | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J3 |
| 1 | LCD pin header | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J1 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | LM1085-3.3 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | LolinD32 | Paul's 3D Things:LolinD32 | M1 |
| 1 | RJ12 | Connector_RJ:RJ12_Amphenol_54601 | J2 |

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!



ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!

It measures 114.9 × 60 mm and has 2 copper layers, 1.6 mm thick.
22 parts, built around the BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the binomaiheu/fluvius-smart-meter repository on GitHub, at the commit this page was made from: the board is kicad/esp32-dmsr.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask binomaiheu before reusing the design.