Skip to the content
2 layers68.8 × 49.5 mmWilliams coin door connector, the printed circuit board in 3D

Williams coin door connector

BinaryS010/williams_coin_door_connector

PCB to interface William's Bally Coin Door wiring harness with virtual pinball controller

Size
68.8 × 49.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
17
Pads
51
Tracks, vias
89, 0
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
4 Jan 2024
Updated
4 Jan 2024

Overview

Williams coin door connector is an open-source printed circuit board by BinaryS010, from the BinaryS010/williams_coin_door_connector repository on GitHub. It is a 2-layer board of 68.8 × 49.5 mm with 18 parts on 17 nets, routed with 89 tracks and 0 vias.

It is built around the LM317. Its parts include 4 resistors, 3 capacitors, 3 connectors, 2 diodes and 1 IC. It belongs with the interfaces and adapters boards of this library.

Main components

1

README

README.md

William's Bally Coin Door Interface PCB

Description

Simple PCB to interface William's Bally Coin Door wiring harness with virtual pinball controller (e.g. Pinscape etc).

Credits

Design is based on an original schematic/layout by Michael Roberts (www.mjrnet.org), but adapted to parts I had on hand.

Parts

18
QtyValueFootprintReferences
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_DIN965_PadH1, H2, H3, H4
21N4002Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1, D2
10.1uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC1
11.0uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC3
110uFCapacitor_THT:CP_Radial_D5.0mm_P2.00mmC2
1150RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2
120RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR4
1220RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3
1820RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1
1Conn_01x04TerminalBlock_RND:TerminalBlock_RND_205-00047_1x04_P5.00mm_HorizontalJ2
1Conn_01x09Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_VerticalJ1
1KK-156-13Connector_Molex:Molex_KK-396_A-41791-0013_1x13_P3.96mm_VerticalJ3
1LM317Package_TO_SOT_THT:TO-220-3_VerticalU1

The 17 most common of 18 parts.

Similar boards

  • 2 layers70 × 50 mmS88iso, the printed circuit board in 3D

    S88iso

    GBert/railroad

    git clone https://github.com/arendst/Tasmota.git cd Tasmota git tag pio run

    33 parts36
  • 2 layers100 × 35 mmTwo comparator effect, the printed circuit board in 3D

    Two comparator effect

    cyberboy666/two_comparator_effect

    analog video posterisation effect - adapted from a rob schafer design

    34 parts15GPL-3.0
  • 2 layersAlim10o, the printed circuit board in 3D

    Alim10o

    acmo0/PedalBoard-Power-Supply-Diy

    This is a description of pedalboard power supplies that I designed an made. I use this power supplies, they are fully working. Pay attention : they are made for 230VAC.

    110 parts14GPL-3.0
  • 2 layers32 × 42 mmNoahFC, the printed circuit board in 3D

    NoahFC

    zosko/NoahFC

    NoahFC - Atmega328 based Flight Controller

    52 parts12GPL-3.0
  • 2 layers300 × 90 mmPreamp, the printed circuit board in 3D

    Preamp

    profdc9/PrettyGoodPreamplifier

    A Pretty Good Preamplifier for Stereo and Subwoofer Use

    222 parts10
  • 2 layers120 × 50 mmAudioswitch, the printed circuit board in 3D

    Audioswitch

    zehome/autoaudioswitcher

    OSHW: Automatic audio input switcher based on audio activity

    80 parts10BSD-3-Clause
  • 2 layers30 × 128.5 mmKwantizer, the printed circuit board in 3D

    Kwantizer

    benjiaomodular/Kwantizer

    [WIP] An Arduino-based CV quantizer for Eurorack modular synthesizers

    32 parts7
  • 2 layers110 × 92.7 mmYaacwk, the printed circuit board in 3D

    Yaacwk

    federicobriata/iz1glg_yaacw_keyer

    YAACWK, Yet Another Arduino CW Keyer, the cheapest HW stuff compatible with K3ng keyer software ( https://github.com/k3ng/k3ng_cw_keyer ). This project contain Eagle project and library of YAACWK.

    87 parts7CC-BY-SA-4.0

Questions

How big is the Williams coin door connector PCB?

It measures 68.8 × 49.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Williams coin door connector use?

18 parts, built around the LM317. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Williams coin door connector KiCad files?

From the BinaryS010/williams_coin_door_connector repository on GitHub, at the commit this page was made from: the board is williams_coin_door_connector.kicad_pcb and its schematic williams_coin_door_connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Williams coin door connector design in my own project?

Its repository states no licence, so its author keeps all rights: ask BinaryS010 before reusing the design.