Skip to the content
PCBKitNew board
2 layersNibble++, the printed circuit board in 3D

A blinky smd soldering challenge

Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
24
Pads
69
Tracks, vias
233, 10
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
10 Nov 2018
Updated
20 Apr 2021

Overview

Nibble++ is an open-source printed circuit board by Binary-Kitchen, from the Binary-Kitchen/nibble_plusplus repository on GitHub. It is a 2-layer board with 22 parts on 24 nets, routed with 233 tracks and 10 vias.

It is built around the NE555 and CR202320F. Its parts include 7 resistors, 5 diodes, 3 capacitors, 2 ICs and 1 switch.

Main components

2

README

README.md

Nibble++

A simple PCB to test your SMD hand-soldering skills. Going down to sand grain sized 01005 SMD parts, this button is a challenge for experienced "soldiers" and those who want to become one.

Nibble++ front

Bill of Material

DesignatorPackageQuantityDesignation
BT1SMD Battery Holder1CR2023
C10805 SMD Capacitor1100n F
C20805 SMD Capacitor11µ F
C30805 SMD Capacitor1100n F
D10805 SMD LED1LED Red
D20603 SMD LED1LED Orange
D30402 SMD LED1LED Yellow
D40201 SMD LED1LED Green
D50201 SMD LED1LED Blue
R10805 SMD Resistor182 Ohm
R20603 SMD Resistor182 Ohm
R30402 SMD Resistor162 Ohm
R40201 SMD Resistor1330 Ohm
R501005 SMD Resistor133 Ohm
R6,R70805 SMD Resistor2100k Ohm
SW1SMD Switch1
U1SOIC-8 NE5551
U2SOP-16 CD40171

Manual

TBD LED Orientation on PCB

Idea

The Idea origins to Ken Olsen and his Attiny SMD Challenge. Many thanks to Ken Olsen for the idea and for opening up this great work to creative commons.

Name

The name Nibble++ origins from a simple nibble peg which has been developed one year earlier. A Nibble is a unit for the amount of 4 bits (https://en.wikipedia.org/wiki/Nibble). Because we are using five LEDs we incremented the value ;).

Copyright and Authorship

Parts

22
QtyValueFootprintReferences
2100k OhmResistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR6, R7
10201 LED Bluenibble++:LED_0201_0603Metric_hand_solderingD5
10201 LED Greennibble++:LED_0201_0603Metric_hand_solderingD4
10402 LED YellowLED_SMD:LED_0402_1005MetricD3
10603 LED Orangenibble++:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder_simple_drawingD2
10805 LED Rednibble++:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder_simple_drawingD1
1100 Ohmnibble++:R_0805_2012Metric_Pad1.15x1.40mm_HandSolderR1
1100 Ohmnibble++:R_0603_1608Metric_Pad1.05x0.95mm_HandSolderR2
1100 OhmResistor_SMD:R_0402_1005MetricR3
1100nCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC1
1100n FCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC3
1150 Ohmnibble++:R_0201_0603Metric_hand_solderingR4
11µ FCapacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolderC2
1200 Ohmnibble++:R_01005_0402Metric_hand_solderingR5
14017nibble++:SOP-16_4.4x10.4mm_P1.27mm_simple_drawingU2
1CR2023Battery:BatteryHolder_Keystone_1060_1x2032BT1
1NE555Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1
1Nibble++SMD-Challange:Nibble++G***
1SW_DPDT_x2nibble++:smd_switch_slideSW1
1kitchen_headSMD-Challange:kitchen_headG***

The 21 most common of 22 parts.

Questions

What parts does the Nibble++ use?

22 parts, built around the NE555 and CR202320F. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Nibble++ KiCad files?

From the Binary-Kitchen/nibble_plusplus repository on GitHub, at the commit this page was made from: the board is nibble++.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Nibble++ design in my own project?

Its repository states no licence, so its author keeps all rights: ask Binary-Kitchen before reusing the design.

Similar boards

  • 2 layers28.6 × 5.3 mmSMD Lauflicht 0805-0603 v1 1, the printed circuit board in 3D

    SMD Lauflicht 0805-0603 v1 1

    Binary-Kitchen/SMD_Lauflicht

    The running light is achieved by a circuit of a clockgenerator NE555 (U1) and two shift registers TI4017 (U2, U3). The NE555 uses the clock signal to shift one bit through both shift registers.

    55 partsCC0-1.0
  • 2 layers60 × 25 mmKeyFinderSMD, the printed circuit board in 3D

    KeyFinderSMD

    Binary-Kitchen/keyFinderSMD

    A simple small key-finder for your keys. If you whistle the key-finder beeps.

    23 parts
  • 2 layers56 × 30.4 mmSoc module, the printed circuit board in 3D

    Soc module

    inoa-io/satellite

    Satellite Hardware Project and Documentation

    19 parts2CERN-OHL-P-2.0
  • 2 layers297.2 × 180.3 mm8bit computer, the printed circuit board in 3D

    8bit computer

    vascofazza/8bit-cpu

    Schematics & code for my 74LS-based 8-bit MK1 CPU

    377 parts317MIT
  • 2 layers203.2 × 149.9 mm65C02 Computer, the printed circuit board in 3D

    65C02 Computer

    dbuchwald/6502

    DB6502: 65C02 based computer inspired by BE6502

    68 parts177MIT
  • 2 layersLM80C R6, the printed circuit board in 3D

    LM80C R6

    leomil72/LM80C

    A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO

    153 parts123GPL-3.0
  • 2 layers249.9 × 89.4 mmCSCvon8, the printed circuit board in 3D

    CSCvon8

    DoctorWkt/CSCvon8

    A crazy small 8-bit CPU built with only seventeen 7400-series chips.

    55 parts112GPL-3.0