4 layers170 × 100 mm
Leviathan V1.3
MotorDynamicsLab/Leviathan
Leviathan Main Controller for Voron 2 / Trident 3D Printers
420 parts124GPL-3.0
4 layers99.1 × 53.3 mm
Teensy4 ramps
bilsef/Teensy4.1-RAMPS1A Teensy 4.1 to RAMPS adapter board
- Size
- 99.1 × 53.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 109
- Pads
- 212
- Tracks, vias
- 382, 52
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 16 Oct 2020
- Updated
- 17 Oct 2020
Overview
Teensy4 ramps is an open-source printed circuit board by bilsef, from the bilsef/Teensy4.1-RAMPS repository on GitHub. It is a 4-layer board of 99.1 × 53.3 mm with 18 parts on 109 nets, routed with 382 tracks and 52 vias.
It is built around the TEENSY 4.1, AOZ1280CI and BAT60AE6327. Its parts include 6 capacitors, 3 resistors, 3 connectors, 2 ICs and 2 diodes. It belongs with the AVR (ATmega, ATtiny) and NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
3
TEENSY 4.1
Development Boards & Kits - ARM ModuleSparkFun ElectronicsUncategorised
AOZ1280CI
SOT-23-6-40℃~+85℃ 1 1.2A 1.5MHz 1mA 3V~26V 800mV~26V Adjustable Buck Built-in No Overcurrent Protection、Cycle-by-cycle current limiting、Hiccup current limiting Step-down type SOT-23-6 DC-DC Converters ROHSAlpha & Omega SemiconductorDC-DC Converters
BAT60AE6327
SOD-323-55℃~+85℃ 1 Independent 10V 2.6mA@8V 370mV@1A 3A 5A SOD-323 Schottky Diodes ROHSInfineon TechnologiesSchottky Diodes
README
README.mdTeensy4.1-RAMPS
A Teensy 4.1 to RAMPS adapter board
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 49.9K | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 100uF, 35V | Capacitor_SMD:C_Elec_6.3x7.7 | C1 |
| 1 | 18pF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 1A SMA | Diode_SMD:D_SMA | D1 |
| 1 | 1uF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 22uF, 16V | Capacitor_SMD:CP_Elec_4x5.3 | C5 |
| 1 | 4.7uH | Inductor_SMD:L_Taiyo-Yuden_NR-50xx | L1 |
| 1 | 9.53K | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | AOZ1280 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
| 1 | Arduino_Mega2560_Shield | Arduino:Arduino_Mega2560_Shield | XA1 |
| 1 | BAT60AE6327 | Diode_SMD:D_SOD-323 | D2 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_Horizontal | J2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Teensy4.1 | Teensy:Teensy41 | U1 |
| 1 | USB_B_Mini | Connector_USB:USB_Mini-B_Lumberg_2486_01_Horizontal | J1 |
Similar boards
- 4 layers368.2 × 159.8 mm
- 2 layers149.9 × 86.4 mm
SensorBoard
aidangonzales/ECE-445M
This is a collection of all the labs that I did in ECE 445M- Real Time Operating Systems Lab.
76 parts - 6 layers90 × 153 mm
Blackpants
o7-machinehum/Blackpants
Open blackpants.kicadpro for the active A523 schematic and PCB. It replaces the A33 hierarchy and uses AXP717C + AXP323 with 2GB LPDDR4.
300 parts189MIT - 4 layers
- 4 layers89 × 61 mm
- 2 layers
- 2 layers20.7 × 20.4 mm
Wiilaserbar
con-f-use/Wiilaserbar
A driver board, case and holder for infrared lasers meant to replace the sensor bar of a Nintendo Wii.
24 parts1
Questions
How big is the Teensy4 ramps PCB?
It measures 99.1 × 53.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Teensy4 ramps use?
18 parts, built around the TEENSY 4.1, AOZ1280CI and BAT60AE6327. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Teensy4 ramps KiCad files?
From the bilsef/Teensy4.1-RAMPS repository on GitHub, at the commit this page was made from: the board is teensy4_ramps.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Teensy4 ramps design in my own project?
Its repository states no licence, so its author keeps all rights: ask bilsef before reusing the design.