Skip to the content
2 layers39.6 × 48 mmCat addon, the printed circuit board in 3D
Size
39.6 × 48 mm
Copper layers
2
Thickness
1.6 mm
Parts
8
Nets
9
Pads
20
Tracks, vias
21, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
2 Jun 2026
Updated
10 Aug 2026

Overview

Cat addon is an open-source printed circuit board by bi-zone, from the bi-zone/offzone-hw repository on GitHub. It is a 2-layer board of 39.6 × 48 mm with 8 parts on 9 nets, routed with 21 tracks and 0 vias.

Its parts include 3 resistors, 3 diodes and 2 connectors.

README

2025/terminal_addon/README.md

terminal_addon

Для заказа платы

  • Количество проводящих слоев: 2
  • Базовый материал (Core): FR4
  • Суммарная толщина платы, мм: 1.5
  • Толщина фольги, мкм: 18 или 35
  • Финишное покрытие площадок: HASL
  • Паяльная маска: чёрная
  • Маркировка обозначений: белая

Для сборки

  • 3 светодиода 1206 Белые
  • 3 резистора 1206 220 Ом
  • Резистор 1206 1 кОм
  • Резистор 1206 100 кОм
  • Конденсатор 1206 10 мкФ
  • Микросхема LMC555
  • Коннектор PLD-6

Подробнее в terminal_addon_BOM.html

Инструкция

  1. Припаиваем микросхему U1. Стрелка на плате указывает расположение первого пина. Первый пин на микросхеме отмечен жирной линией. Жирная линия должна быть возле надписи U1.
  2. Припаиваем резисторы номиналом вверх. Размещать их можно в любом порядке, они не имеют полярности. Главное расставить все по своим местам.
    • R1 - 1 кОм
    • R2 - 100 кОм
    • R3, R4, R5 - 220 Ом
  3. Припаиваем светодиоды линзой вниз, соблюдая полярность. Стрелка светодиода должна указывать на белую линию.
    • D1 - смотрит вниз
    • D2, D3 - смотрят вправо
  4. Припаиваем конденсатор C1.
  5. Припаиваем коннектор.

Parts

8
QtyValueFootprintReferences
3220Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R2, R3
3LED_REDLED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderD1, D2, D3
2Conn_02x02badgelife_sao_v169bis:Badgelife-Shitty-2x2J1, J2

More from bi-zone/offzone-hw

12
  • 2 layers64.4 × 34.5 mmBoat addon, the printed circuit board in 3D

    Boat addon

    bi-zone/offzone-hw

    12 parts13
  • 2 layers48.4 × 49.9 mmSeal addon, the printed circuit board in 3D

    Seal addon

    bi-zone/offzone-hw

    11 parts13
  • 2 layers41.5 × 47.8 mmMasks addon, the printed circuit board in 3D

    Masks addon

    bi-zone/offzone-hw

    10 parts13
  • 2 layers55.9 × 38.7 mmZil addon, the printed circuit board in 3D

    Zil addon

    bi-zone/offzone-hw

    9 parts13
  • 2 layers47.3 × 43.9 mmBear addon, the printed circuit board in 3D

    Bear addon

    bi-zone/offzone-hw

    7 parts13
  • 2 layers30.9 × 49.4 mmLamp addon, the printed circuit board in 3D

    Lamp addon

    bi-zone/offzone-hw

    6 parts13

Similar boards

  • 2 layers20.5 × 24.8 mmPi interface, the printed circuit board in 3D

    Pi interface

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    8 parts3.7k
  • 2 layers59.9 × 25.7 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    8 parts1kGPL-3.0
  • 2 layers52 × 12.6 mmUSB, the printed circuit board in 3D

    USB

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    8 parts960Apache-2.0
  • 2 layers87.5 × 48.5 mm7 input macropad, the printed circuit board in 3D

    7 input macropad

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    8 parts915
  • 2 layers36.2 × 63.1 mmPicoMemcard pico, the printed circuit board in 3D

    PicoMemcard pico

    dangiu/PicoMemcard

    Emulating PSX Memory Card (or controller) using a Raspberry Pi Pico

    8 parts694GPL-3.0
  • 2 layers36 × 10 mmPCB4-PWR BTN Rev.A, the printed circuit board in 3D

    PCB4-PWR BTN Rev.A

    OLIMEX/DIY-LAPTOP

    Do It Yourself Open Source Hardware and Software Modular Hacker's Friendly Laptop

    8 parts578Apache-2.0

Questions

How big is the Cat addon PCB?

It measures 39.6 × 48 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Cat addon use?

8 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Cat addon KiCad files?

From the bi-zone/offzone-hw repository on GitHub, at the commit this page was made from: the board is 2023/cat_addon/cat_addon.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Cat addon design in my own project?

Its repository states no licence, so its author keeps all rights: ask bi-zone before reusing the design.