Skip to the content
2 layers46.4 × 37.7 mmAngelanddevil addon, the printed circuit board in 3D

Angelanddevil addon

bi-zone/offzone-hw13
Size
46.4 × 37.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
12
Pads
32
Tracks, vias
43, 0
Pours
30
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
2 Jun 2026
Updated
10 Aug 2026

Overview

Angelanddevil addon is an open-source printed circuit board by bi-zone, from the bi-zone/offzone-hw repository on GitHub. It is a 2-layer board of 46.4 × 37.7 mm with 13 parts on 12 nets, routed with 43 tracks and 0 vias.

Its parts include 4 resistors, 4 diodes, 2 capacitors, 2 transistors and 1 connector.

README

2025/terminal_addon/README.md

terminal_addon

Для заказа платы

  • Количество проводящих слоев: 2
  • Базовый материал (Core): FR4
  • Суммарная толщина платы, мм: 1.5
  • Толщина фольги, мкм: 18 или 35
  • Финишное покрытие площадок: HASL
  • Паяльная маска: чёрная
  • Маркировка обозначений: белая

Для сборки

  • 3 светодиода 1206 Белые
  • 3 резистора 1206 220 Ом
  • Резистор 1206 1 кОм
  • Резистор 1206 100 кОм
  • Конденсатор 1206 10 мкФ
  • Микросхема LMC555
  • Коннектор PLD-6

Подробнее в terminal_addon_BOM.html

Инструкция

  1. Припаиваем микросхему U1. Стрелка на плате указывает расположение первого пина. Первый пин на микросхеме отмечен жирной линией. Жирная линия должна быть возле надписи U1.
  2. Припаиваем резисторы номиналом вверх. Размещать их можно в любом порядке, они не имеют полярности. Главное расставить все по своим местам.
    • R1 - 1 кОм
    • R2 - 100 кОм
    • R3, R4, R5 - 220 Ом
  3. Припаиваем светодиоды линзой вниз, соблюдая полярность. Стрелка светодиода должна указывать на белую линию.
    • D1 - смотрит вниз
    • D2, D3 - смотрят вправо
  4. Припаиваем конденсатор C1.
  5. Припаиваем коннектор.

Parts

13
QtyValueFootprintReferences
222 uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1, C2
2220Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR2, R3
2300kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R4
2LED_REDDiode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolderD1, D2
2LED_WHITEDiode_SMD:D_1206_3216Metric_Pad1.42x1.75mm_HandSolderD3, D4
2Q_PNP_BECPackage_TO_SOT_SMD:SOT-23_HandsolderingQ1, Q2
1Conn_02x03badgelife_sao_v169bis:Badgelife-SAOv169-SAO-2x3J1

More from bi-zone/offzone-hw

12
  • 2 layers64.4 × 34.5 mmBoat addon, the printed circuit board in 3D

    Boat addon

    bi-zone/offzone-hw

    12 parts13
  • 2 layers48.4 × 49.9 mmSeal addon, the printed circuit board in 3D

    Seal addon

    bi-zone/offzone-hw

    11 parts13
  • 2 layers41.5 × 47.8 mmMasks addon, the printed circuit board in 3D

    Masks addon

    bi-zone/offzone-hw

    10 parts13
  • 2 layers55.9 × 38.7 mmZil addon, the printed circuit board in 3D

    Zil addon

    bi-zone/offzone-hw

    9 parts13
  • 2 layers39.6 × 48 mmCat addon, the printed circuit board in 3D

    Cat addon

    bi-zone/offzone-hw

    8 parts13
  • 2 layers47.3 × 43.9 mmBear addon, the printed circuit board in 3D

    Bear addon

    bi-zone/offzone-hw

    7 parts13
  • 2 layers30.9 × 49.4 mmLamp addon, the printed circuit board in 3D

    Lamp addon

    bi-zone/offzone-hw

    6 parts13

Similar boards

  • 2 layers40 × 20 mmUsb uart, the printed circuit board in 3D

    Usb uart

    earthtojake/text-to-cad

    Design physical products with AI

    13 parts26kMIT
  • 2 layers35 × 29 mmMagSpoofTC, the printed circuit board in 3D

    MagSpoofTC

    samyk/magspoof

    A portable device that can spoof/emulate any magnetic stripe, credit card or hotel card "wirelessly", even on standard magstripe (non-NFC/RFID) readers.

    13 parts4.2k
  • 2 layers20.6 × 23.6 mmAO-03 signal amplifier, the printed circuit board in 3D

    AO-03 signal amplifier

    fossasia/pslab-scripts

    Pocket Science Lab - Scripts for Sensor Experiments

    13 parts1.6kApache-2.0
  • 2 layers47 × 35.6 mmMX7-C-35PL C11, the printed circuit board in 3D

    MX7-C-35PL C11

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    13 parts1.2k
  • 2 layers95 × 95 mmCube batteryboard, the printed circuit board in 3D

    Cube batteryboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    13 parts1.1kGPL-3.0
  • 2 layers15.2 × 20.3 mmPt100stick, the printed circuit board in 3D

    Pt100stick

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    13 parts1.1kGPL-3.0
  • 2 layers53.9 × 23.2 mmBuffer, the printed circuit board in 3D

    Buffer

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    13 parts1kGPL-3.0

Questions

How big is the Angelanddevil addon PCB?

It measures 46.4 × 37.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Angelanddevil addon use?

13 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Angelanddevil addon KiCad files?

From the bi-zone/offzone-hw repository on GitHub, at the commit this page was made from: the board is 2025/angelanddevil_addon/angelanddevil_addon.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Angelanddevil addon design in my own project?

Its repository states no licence, so its author keeps all rights: ask bi-zone before reusing the design.