2 layers80 × 110 mm
NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
59 parts561CERN-OHL-S-2.0
2 layers22.6 × 34.6 mm
Piscine 0 0
BHTho/Electronics_PiscinePCB Design and Soldering Workshop
- Size
- 22.6 × 34.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 31
- Pads
- 90
- Tracks, vias
- 287, 6
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 Nov 2025
- Updated
- 26 Nov 2025
Overview
Piscine 0 0 is an open-source printed circuit board by BHTho, from the BHTho/Electronics_Piscine repository on GitHub. It is a 2-layer board of 22.6 × 34.6 mm with 18 parts on 31 nets, routed with 287 tracks and 6 vias.
It is built around the ATMEGA328P-AU. Its parts include 6 capacitors, 3 resistors, 3 connectors, 2 diodes and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Library:0603 | C1, C5, C6 |
| 2 | 10K | Library:0603 | R1, R3 |
| 2 | 12pF | Library:0603 | C2, C3 |
| 2 | ~ | Library:12pin_gpio | J1, J2 |
| 1 | 1uF | Library:0603 | C4 |
| 1 | 330 | Library:0603 | R2 |
| 1 | ATmega328P-A | Library:ATMEGA328P-AU | U1 |
| 1 | Green | Library:0603 | D2 |
| 1 | LOGO | Library:wizard_silk_screen | G*** |
| 1 | Red | Library:0603 | D1 |
| 1 | SW_Push | Library:TS_3225 | SW2 |
| 1 | ~ | Library:6pin_gpio | J3 |
| 1 | ~ | Library:crys_osc_smd3225_4 | Y1 |
Questions
How big is the Piscine 0 0 PCB?
It measures 22.6 × 34.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Piscine 0 0 use?
18 parts, built around the ATMEGA328P-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Piscine 0 0 KiCad files?
From the BHTho/Electronics_Piscine repository on GitHub, at the commit this page was made from: the board is projects/pisc_0_0/piscine_0_0.kicad_pcb and its schematic projects/pisc_0_0/piscine_0_0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Piscine 0 0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask BHTho before reusing the design.
Similar boards
- 2 layers50.5 × 128.5 mm
- 2 layers152 × 88 mm
RFBitBangSMT
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
271 parts222 - 2 layers50.2 × 31.2 mm
MCU Datalogger
futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.
31 parts138MIT - 2 layers34 × 46 mm
- 2 layers73 × 94 mm
Sportiduino base
sportiduino/sportiduino
Electronic timing system for orienteering and similar outdoor sports events on Arduino
119 parts78GPL-3.0 - 2 layers58.9 × 44.2 mm
OpenPSX2AmigaPadAdapter
SukkoPera/OpenPSX2AmigaPadAdapter
Playstation to Commodore Amiga/CD32 Controller Adapter
43 parts69 - 2 layers60 × 50 mm
Vx8 gps prototype v2.0
4x1md/vx8_gps
DIY GPS module for Yaesu VX-8DR/VX-8DE handheld transceiver.
56 parts66MIT