Skip to the content
2 layers84.5 × 76.5 mmBetter Hackpad, the printed circuit board in 3D

Better Hackpad

bhasan60/specter_v1

While I have a lot of experience with 3D modeling in Onshape, designing a custom 2-layer PCB from scratch in KiCad was a massive learning experience for me. It was fun though :)

Size
84.5 × 76.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
26
Nets
23
Pads
93
Tracks, vias
101, 3
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
22 Jun 2026
Updated
8 Jul 2026

Overview

Better Hackpad is an open-source printed circuit board by bhasan60, from the bhasan60/specter_v1 repository on GitHub. It is a 2-layer board of 84.5 × 76.5 mm with 26 parts on 23 nets, routed with 101 tracks and 3 vias.

Its parts include 10 switches, 9 diodes, 1 IC and 1 connector.

README

README.md

The Story Behind Specter V1

Welcome to the Specter V1! This is a custom 9-key macropad that I designed from the ground up. I wanted a dedicated board just for fun and maybe some custom shortcuts, but more importantly, I wanted to challenge myself to handle every single step of the hardware and software design process.

While I have a lot of experience with 3D modeling in Onshape, designing a custom 2-layer PCB from scratch in KiCad was a massive learning experience for me. It was fun though :)

Hardware & Features

  • The Brain: The whole board is powered by a Seeed Studio XIAO RP2040.
  • Inputs & Control: It features 9 mechanical switches and a tactile rotary encoder.
  • Display: I integrated a small OLED screen at the top to display certain GIFs or random stuff.
  • Custom PCB: The board is a custom 2-layer design. To give it a personal touch, I added a custom New York Knicks logo to the front silkscreen to rep my city!
  • Enclosure: The physical case is a custom two-part 3D-printed shell I modeled in Onshape. It is designed to fit snugly around the components and is secured together using M3 screws.
  • Firmware: The macropad is fully programmable using QMK.

Screenshots

Overall Hackpad:

image

Schematic:

image

PCB:

image image

Case:

image I plan on fitting the two parts of the case together by threading the M3 screws into them.

Bill of Materials (BOM)

  • 1x Seeed Studio XIAO RP2040
  • 9x Mechanical Switches
  • 9x 1N4148 Diodes
  • 1x Rotary Encoder (with push-button)
  • 1x OLED Display
  • 3D Printed Case (Top and Bottom)

Parts

26
QtyValueFootprintReferences
91N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D3, D4, D5, D6, D7, D8, D9
9SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9
1MOUDLE-SEEEDUINO-XIAOfootprints:XIAO-Generic-Hybrid-14P-2.54-21X17.8MMU1
1OLED DisplayOLED_128x32:SSD1306-0.91-OLED-4pin-128x32J1
1RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW10

The 21 most common of 26 parts.

Similar boards

  • 2 layers57.3 × 19 mm11ua, the printed circuit board in 3D

    11ua

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    26 parts990GPL-3.0
  • 2 layers98 × 59.5 mmMCP23017 PCB, the printed circuit board in 3D

    MCP23017 PCB

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    26 parts915
  • 2 layers142.9 × 98.5 mmCantor MX, the printed circuit board in 3D

    Cantor MX

    diepala/cantor

    Cantor keyboard, a 42 key diodeless split keyboard.

    26 parts756GPL-3.0
  • 2 layers103.8 × 50 mmGalagino pcb set, the printed circuit board in 3D

    Galagino pcb set

    harbaum/galagino

    A Galaga, Pac-Man and Donkey Kong arcade emulator for the ESP32

    26 parts558
  • 2 layers20.3 × 34.8 mmL0 ESP32, the printed circuit board in 3D

    L0 ESP32

    Luos-io/luos_engine

    Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

    26 parts546MIT
  • 2 layers40.6 × 50.8 mmWALTsm, the printed circuit board in 3D

    WALTsm

    google/walt

    A device for measuring latency of physical sensors and outputs on phones and computers

    26 parts474Apache-2.0
  • 2 layers158.5 × 75 mmDoj v2, the printed circuit board in 3D

    Doj v2

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    26 parts463

Questions

How big is the Better Hackpad PCB?

It measures 84.5 × 76.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Better Hackpad use?

26 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Better Hackpad KiCad files?

From the bhasan60/specter_v1 repository on GitHub, at the commit this page was made from: the board is pcb/Better_Hackpad.kicad_pcb and its schematic pcb/Better_Hackpad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Better Hackpad design in my own project?

Its repository states no licence, so its author keeps all rights: ask bhasan60 before reusing the design.