2 layers45.1 × 61 mm
Simple breadboard power
BhargaviS16/PCB
Working on PCB design projects using the KiCad EDA tool & EasyEDA tool
18 parts
2 layers132 × 92 mm
Project 2
BhargaviS16/PCBWorking on PCB design projects using the KiCad EDA tool & EasyEDA tool
- Size
- 132 × 92 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 33
- Pads
- 48
- Tracks, vias
- 72, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Apr 2025
- Updated
- 13 Jun 2025
Overview
Project 2 is an open-source printed circuit board by BhargaviS16, from the BhargaviS16/PCB repository on GitHub. It is a 2-layer board of 132 × 92 mm with 7 parts on 33 nets, routed with 72 tracks and 0 vias.
It is built around the ARDUINO UNO R3 and AMS1117-5.0. Its parts include 2 capacitors, 2 resistors, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ARDUINO UNO R3
Arduino UNO R3 Printed Circuit Board ModuleArduinoUncategorised
AMS1117-5.0
SOT-223-40℃~+125℃ 1 1.3V 15V 1A 5V 60dB Fixed Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2 |
| 2 | C | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1, C2 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
Questions
How big is the Project 2 PCB?
It measures 132 × 92 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Project 2 use?
7 parts, built around the ARDUINO UNO R3 and AMS1117-5.0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Project 2 KiCad files?
From the BhargaviS16/PCB repository on GitHub, at the commit this page was made from: the board is project_2/project_2.kicad_pcb and its schematic LED_TORCH/LED_Torch.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Project 2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask BhargaviS16 before reusing the design.
More from BhargaviS16/PCB
2- 2 layers125 × 31.5 mm
LED Torch
BhargaviS16/PCB
Working on PCB design projects using the KiCad EDA tool & EasyEDA tool
5 parts
Similar boards
- 2 layers142.2 × 125.7 mm
- 4 layers78 × 54.3 mm
- 2 layers68.8 × 53.6 mm
Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0 - 2 layers69.1 × 53.8 mm
Motor controller
AlanFord/self-balancing-stick
Dual Axis Reaction Wheel Inverted Pendulum
25 parts79MIT - 2 layers68.6 × 53.3 mm
Protogasm Board V2
Edging-Machines/Edging-Machines
This repository is intended to contain as much information as possible about building, designing, prototyping, and using automated edging machines.
14 parts67MIT - 2 layers53.8 × 69.6 mm
EVSE V2 2
PedroCNeves/AC_ChargingStation
A learning project to create an EV AC Charging station based on an Arduino Uno
32 parts50 - 2 layers113.7 × 61 mm
ArduTester SMD
jonsag/arduTester
An arduino component tester based on https://create.arduino.cc/projecthub/plouc68000/ardutester-v1-13-the-arduino-uno-transistor-tester-dbafb4
17 parts14 - 4 layers65.9 × 52.9 mm
