
IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

A non-invasive heart rate (pulse) monitor circuit designed with KiCad, utilizing an optical sensor and an operational amplifier.
Pulse sensor first is an open-source printed circuit board by bgmbzk, from the bgmbzk/pulse_sensor_pcb repository on GitHub. It is a 2-layer board with 10 parts on 11 nets, routed with 50 tracks and 0 vias.
It is built around the LM358. Its parts include 2 resistors, 2 diodes, 1 capacitor and 1 IC. It belongs with the sensors and measurement and audio and music boards of this library.

This project is my first electronic circuit design created using KiCad. I designed a finger pulse sensor based on the LM358 operational amplifier.
pulse_sensor.kicad_schpulse_sensor.kicad_pcbGerber.zip| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | 10ohm1, 470ohm1 |
| 1 | 1M | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R3 |
| 1 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 1 | 4.7uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1 |
| 1 | Battery_Cell | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BT1 |
| 1 | D_Photo_Filled | LED_THT:LED_D5.0mm | D3 |
| 1 | IR_LED | LED_THT:LED_D5.0mm | D1 |
| 1 | LED | LED_THT:LED_D5.0mm | gosterge_led1 |
| 1 | LM358 | Package_DIP:DIP-8_W7.62mm | U1 |

peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.

zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube

profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance


tvlad1234/pillScopePlus
Oscilloscope based around the STM32F401 Black Pill and a color LCD screen


starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console

10 parts, built around the LM358. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the bgmbzk/pulse_sensor_pcb repository on GitHub, at the commit this page was made from: the board is pulse_sensor_first.kicad_pcb and its schematic pulse_sensor_first.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask bgmbzk before reusing the design.