4 layers120 × 75 mm
Portapack h1
portapack-mayhem/mayhem-firmware
The firmware for the HackRF+PortaPack H1/H2/H4/H4M
111 parts5.5kGPL-3.0
2 layers48 × 24.8 mm
Xmos cpld
bfarago/xmos_cpld_sliceThis is a slice extender panel, which contains a small cpld, aimed to have configurable the bridge between the slot and the slice panel.
- Size
- 48 × 24.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 15
- Nets
- 90
- Pads
- 252
- Tracks, vias
- 1,300, 147
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 11 Sep 2016
- Updated
- 28 Feb 2019
Overview
Xmos cpld is an open-source printed circuit board by bfarago, from the bfarago/xmos_cpld_slice repository on GitHub, published under the LGPL-3.0 licence. It is a 2-layer board of 48 × 24.8 mm with 15 parts on 90 nets, routed with 1,300 tracks and 147 vias.
It is built around the 5M40ZE64C5N and NCP699SN18. Its parts include 5 capacitors, 2 ICs, 2 connectors and 2 switches. It belongs with the fPGA and programmable logic boards and the FPGA and CPLD boards of this library.
Main components
2
5M40ZE64C5N
EQFP-64(7x7)0℃~+85℃ 1.71V~1.89V 32 40 40 54 7.5ns In-system programming MAX V EQFP-64(7x7) Programmable Logic Device (CPLDs/FPGAs) ROHSIntel/AlteraProgrammable Logic Device (CPLDs/FPGAs)
NCP699SN18
TSOP-5-40℃~+85℃@(Ta) 1 1.8V 100uVrms 150mA 40uA 55dB@(120Hz) 690mV@(150mA) 6V Fixed Over Current Protection、Over Temperature Protection、Enable Positive TSOP-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdxmos_cpld_slice
This is a slice extender panel, which contains a small cpld, aimed to have configurable the bridge between the slot and the slice panel.
Parts
15| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100N | Capacitors_SMD:C_0603_HandSoldering | C3, C4, C5 |
| 3 | 33R | Resistors_SMD:R_Cat16-8 | RP1, RP2, RP3 |
| 2 | 2u2 | Capacitors_Tantalum_SMD:TantalC_SizeS_EIA-3216 | C1, C2 |
| 1 | 33R | Resistors_SMD:R_Cat16-4 | RP4 |
| 1 | 5M40ZE64 | Housings_QFP:LQFP-64_10x10mm_Pitch0.5mm | U1 |
| 1 | CONN_02X05 | Pin_Headers:Pin_Header_Straight_2x05 | P1 |
| 1 | NCP699SN18 | TO_SOT_Packages_SMD:SOT-23-5 | U2 |
| 1 | Pillar | confjmpblock:Pillar | P16 |
| 1 | SlicePcbCon | Connect:PCI-EXPRESS | S2 |
| 1 | SlicePcbCon | m:PCIe_36 | S1 |
Similar boards
- 4 layers120 × 75 mm
Portapack hackrf one
dronefpgabasedarchitecture-pizza/portapack
Portable software-defined radio add-on for HackRF Jawbreaker
92 parts7GPL-2.0 - 4 layers120 × 75 mm
- 2 layers96.5 × 96.5 mm
- 2 layers19 × 76 mm
Sub
google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards
15 parts3kApache-2.0 - 2 layers26.7 × 62.2 mm
Deniseadapter
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
15 parts1kGPL-3.0 - 2 layers100 × 44 mm
Videoslot
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
15 parts1k - 2 layers91 × 51 mm
BusinessCard
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
15 parts915
Questions
How big is the Xmos cpld PCB?
It measures 48 × 24.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Xmos cpld use?
15 parts, built around the 5M40ZE64C5N and NCP699SN18. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Xmos cpld KiCad files?
From the bfarago/xmos_cpld_slice repository on GitHub, at the commit this page was made from: the board is kicad/xmos_cpld.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Xmos cpld design in my own project?
Its repository publishes it under the LGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).