

ACFR PCB
Rocket flight computers and data recorders.
- Size
- 26 × 46 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 60
- Nets
- 82
- Pads
- 295
- Tracks, vias
- 559, 95
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 7 Sep 2024
- Updated
- 26 Jan 2025
Overview
ACFR PCB is an open-source printed circuit board by besser435, from the besser435/Aerochungus repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 26 × 46 mm with 60 parts on 82 nets, routed with 559 tracks and 95 vias.
It is built around the ESP32-S3R8, W25Q128JVPIQ and BMP390, with the LIS3MDL, LSM6DSO32 and NCP187AMT330TAG among its other parts. Its parts include 18 capacitors, 17 resistors, 8 ICs, 4 connectors and 3 diodes. It belongs with the ESP32 boards of this library.
Main components
10ESP32-S3R8
QFN-56(7x7)-40℃~+65℃ -74.2dBm 150Mbps 18.5dBm 2.412GHz~2.484GHz 2.4GHz 283mA 3V~3.6V 88mA Bluetooth、WiFi DMA function SPI、USB、UART、I2C、I2S transceiver QFN-56(7x7) RF Transceiver ICs ROHSEspressif SystemsRF Transceiver ICsW25Q128JVPIQ
WSON-8-EP(5x6)-40℃~+85℃ 100,000 cycles 10uA 120ms@(32KB) 128Mbit 133MHz 2.7V~3.6V 20 Years Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection、Power lock protection SPI WSON-8-EP(5x6) NOR FLASH ROHSWinbond ElecNOR FLASHBMP390
LGA-10(2x2)-40℃~+85℃ 0.6pa/K 1.5uA 1.65V~3.6V 30Kpa~1.25bar 3pa 50pa I2C、SPI Integrated ADC and digital interface、Standby mode、On-chip temperature output Yes LGA-10(2x2) Pressure Sensors ROHSBosch SensortecPressure SensorsLIS3MDL
LGA-12(2x2)-40℃~+85℃ 1.9V~3.6V 16bit 1uA、40uA、270uA I2C、SPI ±1.6mT、±1.2mT、±8Gs、±4Gs ±1.6mT、±1.2mT、±8Gs、±4Gs LGA-12(2x2) 3D Magnetic Sensors ROHSSTMicroelectronics3D Magnetic SensorsLSM6DSO32
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 9KB Accelerometer Gyroscope SPI、I2C、MIPI I3C X,Y,Z X,Y,Z ±2000dps ±32g LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometersNCP187AMT330TAG
WDFN-6(2x2)-40℃~+125℃@(Tj) 1 1.2A 150mV@(1.2A) 15uVrms 3.3V 30uA 5.5V 75dB@(1kHz) Fixed Over Current Protection、Thermal shutdown、Enable control、Operation status indication、Built-in soft start Positive WDFN-6(2x2) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsDMP2045U-7
SOT-23-55℃~+150℃ 1 P-Channel 1V 20V 4.3A 6.8nC 634pF 66pF 800mW 90mΩ@1.8V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETsECS-400-8-36B-7KY-TR
SMD2520-4P-30℃~+85℃ 30Ω 40MHz 8pF ±10ppm ±7ppm SMD2520-4P Crystals ROHSECSCrystalsNXV55UNR
SOT-23-55℃~+150℃ 1 N-channel 1.9A 30V 31pF 352pF 36pF 480mW 66mΩ@4.5V 8.7nC@4.5V 900mV N-Channel SOT-23 MOSFETs ROHSNexperiaMOSFETsUSB4105-GF-A
SMD-40℃~+85℃ 1 12P 48V 5A Black Female Surface Mount, Right Angle Type-C USB 2.0 SMD USB Connectors ROHSGlobal Connector Technology (GCT)USB Connectors
README
README.mdAerochungus
Rocket flight computers and data recorders.
Parts
60| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C7, C10, C11, C12, C13, C16, C17 |
| 7 | 47k | Capacitor_SMD:C_0603_1608Metric | R8, R9, R10, R11, R12, R13, R14 |
| 4 | 1uF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C5, C15 |
| 3 | 10k | Capacitor_SMD:C_0603_1608Metric | R6, R7, R17 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C6, C18 |
| 2 | 5.1k | Capacitor_SMD:C_0603_1608Metric | R1, R2 |
| 2 | 6pF | Capacitor_SMD:C_0402_1005Metric | C8, C9 |
| 2 | M2.5_2.7mm | besser_footprints:M2.5_2.7mm_hole | H1, H2 |
| 2 | PTS636 SK25F | Button_Switch_SMD:SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS | SW1, SW2 |
| 2 | SS2040LL | Diode_SMD:D_SOD-123 | D2, D3 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2 |
| 2 | W25Q128JVPIQ | Package_SON:WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U3, U4 |
| 1 | 1.5F | besser_footprints:CP_Radial_D16.5mm_P12mm | C14 |
| 1 | 100k | Capacitor_SMD:C_0603_1608Metric | R5 |
| 1 | 10K | Capacitor_SMD:C_0603_1608Metric | R4 |
| 1 | 1k | Capacitor_SMD:C_0603_1608Metric | R15 |
| 1 | 5.1K | Capacitor_SMD:C_0603_1608Metric | R3 |
| 1 | 806o | Capacitor_SMD:C_0603_1608Metric | R16 |
| 1 | BMP390 | besser_footprints:10-WFLGA | U2 |
| 1 | Buzzer | besser_footprints:CMT-9504-87-SMT_BUZZER | BZ1 |
| 1 | DMP2045U-7 | Package_TO_SOT_SMD:SOT-23-3 | Q2 |
| 1 | ECS-400-8-36B-7KY | Crystal:Crystal_SMD_EuroQuartz_X22-4Pin_2.5x2.0mm | Y1 |
| 1 | ESP32-S3R8 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm | U1 |
| 1 | H3LIS331DLTR | besser_footprints:TLGA-16L | U6 |
| 1 | IN-PI22 | besser_footprints:IN-PI22TAT5R5G5B | D1 |
| 1 | JST-PH | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J4 |
| 1 | JST-SM04B-SRSS | besser_footprints:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | J3 |
| 1 | LIS3MDL | Package_LGA:LGA-12_2x2mm_P0.5mm | U7 |
| 1 | LSM6DSO32 | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U5 |
| 1 | Micro_SD_Card_Det1 | besser_footprints:GCT_MEM2061-01-188-00-A_REVA | J2 |
| 1 | NCP187AMT330TAG | besser_footprints:6-WDFN_2x2mm_EP | U8 |
| 1 | NXV55UNR | Package_TO_SOT_SMD:SOT-23-3 | Q1 |
| 1 | USB4105-GF-A | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
Similar boards
- 8 layers37 × 37 mm

- 2 layers200 × 100 mm

- 4 layers95 × 30 mm

- 2 layers200.5 × 206.6 mm

- 2 layers42 × 85 mm

Kasa remote
Paumanok/kasa-remote
An ESP32 based remote control device for manipulating and monitoring TPLink Kasa devices.
47 parts - 6 layers34 × 40 mm

ESPWatchS3
Ilikemining1/ESPWatchS3
ESP32-S3 based smartwatch with CrystalFontz 240x240 1.3in LCD.
126 parts2 - 8 layers60 × 70 mm

ESP32-S3 Small Camera
maxd-out83/ESP32-S3-Small-Camera-PCB-v2.4
Engineering PCB Design Project
91 parts - 4 layers54 × 30 mm

Questions
How big is the ACFR PCB PCB?
It measures 26 × 46 mm and has 4 copper layers, 1.61 mm thick.
What parts does the ACFR PCB use?
60 parts, built around the ESP32-S3R8, W25Q128JVPIQ, BMP390 and LIS3MDL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ACFR PCB KiCad files?
From the besser435/Aerochungus repository on GitHub, at the commit this page was made from: the board is AC-FR/ACFR-PCB/ACFR-PCB.kicad_pcb and its schematic AC-FR/ACFR-PCB/ACFR-PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ACFR PCB design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).