2 layers70.1 × 43.2 mm
Iaq device
nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality
19 parts396
2 layers44 × 27.4 mm
Pcb workshop simple
besi/pcb-workshop-simple- Size
- 44 × 27.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 6
- Nets
- 16
- Pads
- 34
- Tracks, vias
- 52, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 25 Feb 2023
- Updated
- 25 Feb 2023
Overview
Pcb workshop simple is an open-source printed circuit board by besi, from the besi/pcb-workshop-simple repository on GitHub. It is a 2-layer board of 44 × 27.4 mm with 6 parts on 16 nets, routed with 52 tracks and 0 vias.
It is built around the WEMOS D1 MINI. Its parts include 3 connectors, 1 resistor, 1 IC and 1 diode. It belongs with the ESP8266 boards of this library.
Main components
1Parts
6| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Connections | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J4 |
| 1 | I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | Neopixel | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | WeMos_D1_mini | Module:WEMOS_D1_mini_light | U2 |
Questions
How big is the Pcb workshop simple PCB?
It measures 44 × 27.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pcb workshop simple use?
6 parts, built around the WEMOS D1 MINI. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcb workshop simple KiCad files?
From the besi/pcb-workshop-simple repository on GitHub, at the commit this page was made from: the board is PCBWorkshopSimple.kicad_pcb and its schematic PCBWorkshopSimple.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcb workshop simple design in my own project?
Its repository states no licence, so its author keeps all rights: ask besi before reusing the design.
Similar boards
- 2 layers37.6 × 29.3 mm
Romulator programmer interface
bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems
5 parts160 - 2 layers32.1 × 40.8 mm
Power Monitor Version 1
alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)
8 parts122 - 2 layers91 × 49 mm
- 2 layers97.5 × 59.3 mm
Control Board
kholia/Easy-Digital-Beacons-v1
A simple and easy Arduino / Pi Pico / ESP8266-powered WSPR, FT8, and FT4 beacon system which uses NTP + DS3231 RTC for timing. Super extensible! Now comes with optional GPS support.
17 parts89 - 2 layers64.6 × 36.9 mm
Navien latest
htumanyan/navien
Navien water heater wire protocol for communication with NaviLink and other attached devices
30 parts65 - 2 layers49.5 × 30 mm
- 2 layers
