4 layers12.7 × 7.6 mm
Differential amp for breadboard
SK-Electronics-Consulting/electronics-widgets
Small, Custom Tools for Electronics
12 parts1
4 layers50 × 32 mm
GaNyMOD Base
bentwire/GaNyMOD-BaseSingle GaN half bridge and driver. Most basic GaNyMOD module: 0-30V, 0-20A(?), PE29102 Driver, EPC2102 GaN Half Bridge.
- Size
- 50 × 32 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 31
- Pads
- 216
- Tracks, vias
- 158, 57
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 26 May 2019
- Updated
- 29 May 2019
Overview
GaNyMOD Base is an open-source printed circuit board by bentwire, from the bentwire/GaNyMOD-Base repository on GitHub, published under the MIT licence. It is a 4-layer board of 50 × 32 mm with 30 parts on 31 nets, routed with 158 tracks and 57 vias.
It is built around the AD8216YRZ, PE29102A-X and TLV3541ID, with the BAT54AW, EPC2102 and MPMT10019001AT1 among its other parts. Its parts include 8 resistors, 6 capacitors, 3 ICs, 1 diode and 1 transistor.
Main components
6
AD8216YRZ
SOIC-8-40℃~+125℃ 0.5uV/√Hz@1kHz 1 15V/us 20uV/℃ 2mA 3MHz 4.5V~5.5V 5.5V 500uV 70dB 90dB Adjustable output common-mode voltage、High-side current sensing SOIC-8 Differential Amplifiers ROHSAnalog DevicesDifferential Amplifiers
PE29102A-X
--40℃~+125℃ 2 2A 4A 5V 900ps 900ps Full-Bridge MOSFET - Gate Drivers ROHSpSemiGate DriversTLV3541ID
SOIC-8-2.75V~-1.25V、1.25V~2.75V -40℃~+125℃ 1 100mA 150V/us 1pA 2.5V~5.5V 200MHz 2mV 3pA 4.5uV/℃ 5.2mA 7.5nV/√Hz@1MHz 80dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
BAT54AW
SOT-323(SC-70)1 Pair Common Anode 1V@100mA 200mA 2uA@25V 30V SOT-323(SC-70) Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
EPC2102
--40℃~+150℃ 1.3V 11pF 2 N-Channel 3.6mΩ 30A 500pF、610pF 60V 850pF 8nC E-mode N-Channel - GaN Transistors(GaN HEMT) ROHSEPCMOSFETs
MPMT10019001AT1
SOT-23100mW 1kΩ、9kΩ 2 3 ±0.1% ±25ppm/℃ SOT-23 Resistor Networks, Arrays ROHSVishay IntertechnologyResistor Networks & Arrays
README
README.mdGaNyMOD-Base
Most basic GaNyMOD module. Single GaN half bridge and driver: 0-30V, 0-20A(?), PE29102 Driver, EPC2102 GaN Half Bridge.
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4, H5, H6, H7 |
| 4 | 1R | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4 |
| 4 | 1uF 16V X5R | Capacitor_SMD:C_0402_1005Metric | C3, C4, C5, C6 |
| 2 | 100K | Potentiometer_SMD:Potentiometer_Bourns_3214G_Horizontal | RV1, RV2 |
| 2 | 10uF 50V X5R | Capacitor_SMD:C_1206_3216Metric | C1, C2 |
| 2 | 30K | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 1 | 0.010 Ohm | Resistor_SMD:R_2512_6332Metric | R7 |
| 1 | AD8216 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | BAT54AW | Package_TO_SOT_SMD:SOT-323_SC-70 | D1 |
| 1 | Conn_01x09_Male | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Horizontal | J2 |
| 1 | EPC2102 | GaNyMOD:EPC2102-FC | Q1 |
| 1 | MPMT10019001AT1 | Package_TO_SOT_SMD:SOT-23 | R8 |
| 1 | Net-Tie_2 | NetTie:NetTie-2_THT_Pad0.3mm | NT1 |
| 1 | PE29102 | Package_CSP:pSemi_CSP-16_1.64x2.04mm_P0.4mm | U1 |
| 1 | TLV3541 | Package_TO_SOT_SMD:TSOT-23-5 | U3 |
Questions
How big is the GaNyMOD Base PCB?
It measures 50 × 32 mm and has 4 copper layers, 1.6 mm thick.
What parts does the GaNyMOD Base use?
30 parts, built around the AD8216YRZ, PE29102A-X, TLV3541ID and BAT54AW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the GaNyMOD Base KiCad files?
From the bentwire/GaNyMOD-Base repository on GitHub, at the commit this page was made from: the board is GaNyMOD-Base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the GaNyMOD Base design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers125 × 70 mm
- 4 layers88.1 × 17.1 mm
Client pcb
nullcline/fuel_cell_monitor
[school] a sponsored capstone project to design a low-cost, scalable, voltage monitoring system that was capable of measuring a wide voltage range
23 parts - 2 layers24 × 18 mm
Usb2serial autovtg
znuh/usb2serial-autovtg
USB to serial converter with automatic target voltage detection, buffered IOs, 1.8V to 5V support and backflow current protection
38 parts9CC-BY-SA-4.0 - 2 layers88.9 × 50.8 mm
Core16 LB
ageppert/Core16-Interactive-Core-Memory
Weave 16 bits of core memory and LEDs to interact with using a magnetic wand
130 parts5 - 4 layers80 × 100 mm
Harp treadmill
AllenNeuralDynamics/harp.device.treadmill-driver
0326: a Harp-compatible device for controlling an instrumented mouse treadmill
173 parts4 - 8 layers90 × 65 mm
Digital board v1
es-ude/elasticai.hardware
Schematics and Board design for ElasticNodeHardware
261 parts4MIT - 2 layers85 × 85 mm
Core64c LB
ageppert/Core-64c-Compact-Interactive-Core-Memory-Badge
64 bits of core memory and LEDs to interact with directly using a magnetic wand.
162 parts1GPL-3.0