
GaNyMOD Base
bentwire/GaNyMOD-Base
Single GaN half bridge and driver. Most basic GaNyMOD module: 0-30V, 0-20A(?), PE29102 Driver, EPC2102 GaN Half Bridge.
pSemiExtended
-40℃~+125℃ 2 2A 4A 5V 900ps 900ps Full-Bridge MOSFET - Gate Drivers ROHS
The PE29102A-X is a gate Driver made by pSemi with 16 pins. -40℃~+125℃ 2 2A 4A 5V 900ps 900ps Full-Bridge MOSFET - Gate Drivers ROHS.
PCBKit's library has its KiCad symbol (Driver_FET:PE29102, from KiCad's library) and its footprint (Package_CSP:pSemi_CSP-16_1.64x2.04mm_P0.4mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C2653808). 1 open-source board in 1 repository on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | HSGpd | Output |
| 2 | HSS | Passive |
| 3 | HSB | Input |
| 4 | NC | Not connected |
| 5 | RDLH | Passive |
| 6 | HSGpu | Output |
| 7 | EN | Input |
| 8 | IN | Input |
| 9 | LSGpu | Output |
| 10 | PHCTL | Input |
| 11 | GND | Power in |
| 12 | LSGpd | Output |
| 13 | LSS | Passive |
| 14 | LSB | Input |
| 15 | VDD | Power in |
| 16 | RDHL | Passive |

bentwire/GaNyMOD-Base
Single GaN half bridge and driver. Most basic GaNyMOD module: 0-30V, 0-20A(?), PE29102 Driver, EPC2102 GaN Half Bridge.
Yes. The symbol is Driver_FET:PE29102 and the footprint Package_CSP:pSemi_CSP-16_1.64x2.04mm_P0.4mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
pSemi publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C2653808, with 0 in stock; the sellers' links on this page open their listings.
1 board in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.