Skip to the content
2 layers285.8 × 97.6 mmKB60, the printed circuit board in 3D

60% Low Profile Keyboard

Size
285.8 × 97.6 mm
Copper layers
2
Thickness
1.6 mm
Parts
143
Nets
88
Pads
520
Tracks, vias
632, 60
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
9 Dec 2025
Updated
27 Jan 2026

Overview

KB60 is an open-source printed circuit board by benson-z, from the benson-z/KB60 repository on GitHub, published under the MIT licence. It is a 2-layer board of 285.8 × 97.6 mm with 143 parts on 88 nets, routed with 632 tracks and 60 vias.

It is built around the 1N4148W and S2B-PH-SM4-TB. Its parts include 65 switches, 64 diodes, 1 IC and 1 connector. It belongs with the nRF52 and nRF5x boards of this library.

Main components

2

README

README.md

KB60

60% low-profile keyboard

Features

  • 2-layer PCB
  • Gateron KS33 Hot-swap Sockets
  • USB and Bluetooth Connectivity
  • ZMK Studio configurable keymap

BOM

Parts

143
QtyValueFootprintReferences
641N4148WDiode_SMD:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +48
64Gateron_LP_2.0Button_Switch_Keyboard:Gateron_LP_2.0SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +48
1S2B-PH-SM4-TBConnector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_HorizontalJ1
1SW_SPDTalpsalpine:SW_SSSS811101SW0
1SuperMini nRF52840Supermini:SuperMini_nRF52840_AH_USBupU1

The 131 most common of 143 parts.

Similar boards

  • 2 layers265.5 × 105.1 mmN42a7c, the printed circuit board in 3D

    N42a7c

    hatanoh/n40a8-pcb

    113 partsMIT
  • 6 layers69.7 × 76.7 mmAmulet controller, the printed circuit board in 3D

    Amulet controller

    EPFLXplore/XRE_LeggedRobot_HW

    PCB designs for Xplore Research's robot dog project

    414 parts348Apache-2.0
  • 6 layers84 × 50 mmSolar ribbit, the printed circuit board in 3D

    Solar ribbit

    Ribbit-Network/ribbit-network-frog-hardware

    The sensor for the world's largest crowdsourced network of open-source, low-cost, GHG Gas Detection Sensors.

    171 parts107MIT
  • 2 layers89 × 55.5 mmMintypcb, the printed circuit board in 3D

    Mintypcb

    jackw01/pi-tin

    Open source raspberry pi handheld retro gaming console

    129 parts75CERN-OHL-W-2.0
  • 4 layers36.5 × 69 mmStorm tracker, the printed circuit board in 3D

    Storm tracker

    solderable/storm-tracker-hardware

    Open-source-ready Storm Tracker hardware design, documentation, BOM, and manufacturing package

    102 parts58
  • 2 layers100.9 × 62.4 mmWnm mk 1 rev D, the printed circuit board in 3D

    Wnm mk 1 rev D

    Fabien-Chouteau/Wee-Noise-Maker

    Open source pocket synthesizer

    128 parts37GPL-3.0
  • 4 layers65 × 30 mmSoleil, the printed circuit board in 3D

    Soleil

    protolux-electronics/soleil_hardware

    Hardware design files for Soleil, an open source power management and sleep control board for Raspberry Pi

    81 parts22CERN-OHL-P-2.0
  • 2 layers61.5 × 25 mmMKRZero V5.0, the printed circuit board in 3D

    MKRZero V5.0

    hulkco/oshwi

    Upload "Oshwi" Badge for OshwDem 2017 a Coruña

    94 parts15

Questions

How big is the KB60 PCB?

It measures 285.8 × 97.6 mm and has 2 copper layers, 1.6 mm thick.

What parts does the KB60 use?

143 parts, built around the 1N4148W and S2B-PH-SM4-TB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the KB60 KiCad files?

From the benson-z/KB60 repository on GitHub, at the commit this page was made from: the board is pcb/kb.kicad_pcb and its schematic pcb/kb.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the KB60 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).