4 layers38.5 × 25 mm
6 layers32.8 × 43.7 mm
Stm32-breakout
benno1237/stm32-breakout- Size
- 32.8 × 43.7 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 72
- Pads
- 201
- Tracks, vias
- 390, 166
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 13 Mar 2026
- Updated
- 19 Mar 2026
Overview
Stm32-breakout is an open-source printed circuit board by benno1237, from the benno1237/stm32-breakout repository on GitHub. It is a 6-layer board of 32.8 × 43.7 mm with 27 parts on 72 nets, routed with 390 tracks and 166 vias.
It is built around the STM32G0B1RET6, XC6206P332MR-MS and TS-1088-AR02016. Its parts include 10 capacitors, 5 resistors, 4 connectors, 3 ICs and 2 diodes. It belongs with the interfaces and adapters boards and the STM32 boards of this library.
Main components
3
STM32G0B1RET6
LQFP-64(10x10)-40℃~+85℃ 1.7V~3.6V 144KB 32 Bit 512KB 60 64MHz ARM Cortex-M0+ Built-in+External FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
XC6206P332MR-MS
SOT-23-20℃~+85℃ 1 240mV@(50mA) 250mA 3.3V 30uVrms 50dB@(1kHz) 6.5V Fixed Positive Short Circuit Protection SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMSKSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TS-1088-AR02016
SMD,4x3mm-30℃~+80℃ 1.6N 100,000 cycles 12V 2mm 3.9mm 3mm 50mA Black Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD,4x3mm Tactile Switches ROHSXUNPUTactile Switches
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C7, C10 |
| 2 | 15pF | Capacitor_SMD:C_0603_1608Metric | C5, C6 |
| 2 | 1uF | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | Conn_02x16_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x16_P2.54mm_Vertical | J1, J2 |
| 2 | TS-1088-AR02016 | stm32_breakout:SW-SMD_L3.9-W3.0-P4.45 | S1, S2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 32.768kHz | stm32_breakout:CRYSTAL-SMD_L3.2-W1.5-1 | U1 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 600R @ 100MHz | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | NC | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | SRV05-4_C558418 | stm32_breakout:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | D2 |
| 1 | STM32G0B1RET6 | stm32_breakout:LQFP-64_L10.0-W10.0-P0.50-LS12.0-BL | U2 |
| 1 | TYPE-C 16PIN 2MD(073) | stm32_breakout:USB-C-SMD_TYPE-C-6PIN-2MD-073 | J3 |
| 1 | XC6206P332MR-MS | stm32_breakout:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | U3 |
| 1 | ~ | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J4 |
Similar boards
- 2 layers100 × 50 mm
PY32F071R1BU6 EB
f-zhuk/PY32F071R1BU6-Evaluation-board
Puya PY32F071R1BU6 evaluation board for small battery operated gadgets.
69 parts - 2 layers13 × 50 mm
- 2 layers63.8 × 44 mm
- 2 layers100 × 86 mm
InterfaceBoard
farlepet/keithley-615-printer-boards
Drop-in replacements for the buffer/printer boards for the Keithley 615 Electrometer
184 partsMIT - 4 layers66 × 88 mm
- 4 layers172.5 × 85 mm
- 4 layers90 × 70 mm
InclinationMeter
soldernerd/InclinationMeter
A battery-powered, Bluetooth-enabled precision electronic level instrument for machine tool geometry inspection and granite surface plate qualification.
118 parts
Questions
How big is the Stm32-breakout PCB?
It measures 32.8 × 43.7 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Stm32-breakout use?
27 parts, built around the STM32G0B1RET6, XC6206P332MR-MS and TS-1088-AR02016. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Stm32-breakout KiCad files?
From the benno1237/stm32-breakout repository on GitHub, at the commit this page was made from: the board is stm32_breakout.kicad_pcb and its schematic stm32_breakout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Stm32-breakout design in my own project?
Its repository states no licence, so its author keeps all rights: ask benno1237 before reusing the design.