4 layers275 × 240 mm
6 layers220 × 160 mm
Section
BennetLeff/temper1a breville control freak ++
- Size
- 220 × 160 mm
- Copper layers
- 6
- Thickness
- 1.6 mm
- Parts
- 91
- Nets
- 67
- Pads
- 268
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 6 (file 20211014)
- Created
- 11 Dec 2025
- Updated
- 30 Oct 2026
Overview
Section is an open-source printed circuit board by BennetLeff, from the BennetLeff/temper repository on GitHub. It is a 6-layer board of 220 × 160 mm with 91 parts on 67 nets.
It is built around the IRM-05-15, IRM-20-15 and AMC1311BDWVR, with the LM4040A25IDBZR, TLV3201AIDBVR(LX) and RC0603FR-0710KL among its other parts. Its parts include 34 capacitors, 31 resistors, 7 ICs, 6 transistors and 4 connectors.
Main components
12
IRM-05-15
DIP-4DIP-4 Power Module/Power Supply ROHSMWGlobal Sourcing Parts
IRM-20-15
DIP,52.4x27.2mm1 1.4A 15V 21W 84% 85VAC~305VAC AC-DC Short Circuit Protection DIP,52.4x27.2mm Power Module/Power Supply ROHSMWAC-DC Power Modules
AMC1311BDWVR
SOIC-8-300mil-55℃~+125℃ 1.5mV 3.5nA 3uV/℃ Transimpedance Amplifier SOIC-8-300mil Special Purpose Amplifiers ROHSTexas InstrumentsSpecial Purpose Amplifiers
LM4040A25IDBZR
SOT-23-40℃~+85℃@(Ta) 100ppm/℃ 15mA 2.5V 35uVrms 45uA 45uA Fixed Parallel ±0.1% SOT-23 Voltage Reference ROHSTexas InstrumentsVoltage Reference
TLV3201AIDBVR(LX)
SOT-23-5SOT-23-5 Comparators ROHSlingxingicComparators
RC0603FR-0710KL
UncategorisedUnknown maker942C12P22K-F
插件,D26.5xL34mm-55℃~+105℃ 220nF 430V、1.2kV ±10% 插件,D26.5xL34mm Polypropylene Film Capacitors (CBB) ROHSCornell Dubilier ElectronicsPolypropylene Film Capacitors (CBB)942C6W2P5K-F
插件,D32xL54mm-55℃~+105℃ 2.5uF 300V、600V ±10% 插件,D32xL54mm Polypropylene Film Capacitors (CBB) ROHSCornell Dubilier ElectronicsPolypropylene Film Capacitors (CBB)AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsDE1E3RA222MA4BP01F
插件,P=10mm2.2nF 440V X1,Y1 ±20% Plugin,P=10mm Safety Capacitors ROHSMurataSafety CapacitorsR463R410000M1M
插件,P=27.5mm-40℃~+110℃ 1uF 310V CQC、UL X2 Plugin,P=27.5mm Safety Capacitors ROHSKEMETSafety CapacitorsRC0603FR-07100KL
UncategorisedUnknown maker
README
README.mdTemper — ESP32-S3 Induction Cooker
Temper is a consumer induction cooker: a 120 V full-bridge power stage, isolated gate drive, sensing and protection units, and ESP32-S3 firmware with an 8-state transition-table machine and hardware-latched protection.
Implementation and qualification status lives with the evidence, not here: see zapote/CHECKS.md and each unit's acceptance record. Nothing has been qualified on hardware.
Layout
| Path | What it is |
|---|---|
zapote/ | Board validation workspace: Rust ERC/DRC/DFM, the five standalone units (RTD, current-sense, thermal-sense, interlock, gate-drive), the 120 V power stage, native KiCad adapters and fab-house profiles |
firmware/ | ESP32-S3 firmware, host tests, code generators and state-machine/invariant gates (firmware/tools/) |
components/, datasheets/ | Part documentation and datasheets |
docs/, skills/, output/ | Plans, evidence and history; product/PCB/mechanical review skills; mechanical and prototype outputs |
The legacy placer/router, the old production board (pcb/, elec/), datasets,
dashboards and their CI were removed on 2026-10-08. Everything is recoverable from
tag archive/temper-legacy-2026-10-08.
Check a board
export KICAD_CLI=/Applications/KiCad/KiCad.app/Contents/MacOS/kicad-cli
export KICAD_PYTHON=/Applications/KiCad/KiCad.app/Contents/Frameworks/Python.framework/Versions/3.9/Resources/Python.app/Contents/MacOS/Python
make -C zapote check-board BOARD=/abs/path/board.kicad_pcb PROFILE=fab-profiles/jlcpcb-2layer-2oz.jsonStackup, KiCad ERC/DRC (one finding per violation, with location and values) and
fab-house DFM against a vendor profile. make -C zapote help lists the unit,
layout and current checks.
Build and test
make zapote # zapote Rust suite
make firmware-test # firmware host tests
make bridge-python # build zapote_bridge (uv sync)See AGENTS.md for working rules and CONTRIBUTING.md for conventions.
Parts
91| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | C0603C104K5RACTU | Capacitor_SMD:C_0603_1608Metric | C7, C8, C11, C14, C15, C18, C25, C28, C29, C32, C33, C34 |
| 6 | GRM32ER71H106KA12L | Capacitor_SMD:C_1210_3225Metric | C9, C10, C16, C17, C24, C26 |
| 6 | RC0603FR-0710KL | Resistor_SMD:R_0603_1608Metric | R8, R11, R13, R16, R19, R21 |
| 4 | GRM31A5C3A102JW01D | Capacitor_SMD:C_1206_3216Metric | C12, C13, C19, C20 |
| 4 | IPW65R018CFD7 | Package_TO_SOT_THT:TO-247-3_Vertical | Q2, Q3, Q5, Q6 |
| 4 | RC1206FR-073R9L | Resistor_SMD:R_1206_3216Metric | R10, R12, R18, R20 |
| 4 | RC1206FR-07470KL | Resistor_SMD:R_1206_3216Metric | R22, R23, R24, R25 |
| 2 | 942C12P22K-F | temper:CDE_942C_D26.5_L34.0_Axial_ReviewOnly | C21, C22 |
| 2 | 942C6W2P5K-F | temper:CDE_942C_D32.0_L54.0_Axial_ReviewOnly | C5, C6 |
| 2 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1, Q4 |
| 2 | C0603C102J5GACTU | Capacitor_SMD:C_0603_1608Metric | C27, C31 |
| 2 | DE1E3RA222MA4BP01F | Capacitor_THT:C_Disc_D10.5mm_W5.0mm_P10.00mm | C3, C4 |
| 2 | R463R410000M1M | Capacitor_THT:C_Rect_L26.5mm_W10.5mm_P22.50mm_MKS4 | C1, C2 |
| 2 | RC0603FR-07100KL | Resistor_SMD:R_0603_1608Metric | R7, R15 |
| 2 | RC0603FR-071KL | Resistor_SMD:R_0603_1608Metric | R6, R14 |
| 2 | RC0603FR-0739KL | Resistor_SMD:R_0603_1608Metric | R9, R17 |
| 2 | RC1206FR-07120KL | Resistor_SMD:R_1206_3216Metric | R1, R2 |
| 2 | RC1206FR-07220KL | Resistor_SMD:R_1206_3216Metric | R3, R4 |
| 2 | RT0603BRD0710KL | Resistor_SMD:R_0603_1608Metric | R28, R29 |
| 2 | UCC21550BDWKR | lib:SOIC16W_Isolated | U1, U2 |
| 2 | UF4007-E3/54 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2 |
| 1 | 0326020.MXP | Fuse:Fuseholder_Clip-6.3x32mm_Littelfuse_102071_Inline_P34.70x7.60mm_D2.00mm_Horizontal | F1 |
| 1 | 0430451612 | Connector_Molex:Molex_Micro-Fit_3.0_43045-1612_2x08_P3.00mm_Vertical | J4 |
| 1 | 1711026 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | 1711039 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-3-3-5.08_1x03_P5.08mm_Horizontal | J1 |
| 1 | 942C12P1K-F | temper:CDE_942C_D19.0_L34.0_Axial_ReviewOnly | C23 |
| 1 | AMC1311BDWVR | Package_SO:SOIC-8_7.5x5.85mm_P1.27mm | U4 |
| 1 | B2P-VH(LF)(SN) | Connector_JST:JST_VH_B2P-VH_1x02_P3.96mm_Vertical | J3 |
| 1 | B82726S2203A020 | temper:B82726S2_ReviewOnly | L1 |
| 1 | C0603C101J5GACTU | Capacitor_SMD:C_0603_1608Metric | C30 |
| 1 | CST3015-100ED | temper:CST3015 | T1 |
| 1 | GBJ2510-F | temper:Diode_Bridge_GBJ2510 | BR1 |
| 1 | IRM-05-15 | Converter_ACDC:Converter_ACDC_MeanWell_IRM-05-xx_THT | PS2 |
| 1 | IRM-20-15 | Converter_ACDC:Converter_ACDC_MeanWell_IRM-20-xx_THT | PS1 |
| 1 | ISO7710FDWR | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U7 |
| 1 | LM4040A25IDBZR | Package_TO_SOT_SMD:SOT-23 | U5 |
| 1 | MC78L05ACHT1G | Package_TO_SOT_SMD:SOT-89-3 | U3 |
| 1 | RC0603FR-076K8L | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | RT0603BRD0710K5L | Resistor_SMD:R_0603_1608Metric | R30 |
| 1 | RT0603BRD0715K8L | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | RT0603BRD079K76L | Resistor_SMD:R_0603_1608Metric | R31 |
| 1 | TLV3201AIDBVR | Package_TO_SOT_SMD:SOT-23-5 | U6 |
| 1 | TMOV20RP175E | temper:TMOV20RP_ReviewOnly | RV1 |
| 1 | WSK2512R0010FEA | Resistor_SMD:R_Shunt_Vishay_WSK2512_6332Metric_T1.19mm | R5 |
Questions
How big is the Section PCB?
It measures 220 × 160 mm and has 6 copper layers, 1.6 mm thick.
What parts does the Section use?
91 parts, built around the IRM-05-15, IRM-20-15, AMC1311BDWVR and LM4040A25IDBZR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Section KiCad files?
From the BennetLeff/temper repository on GitHub, at the commit this page was made from: the board is zapote/power-stage-120v/native-01/section.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Section design in my own project?
Its repository states no licence, so its author keeps all rights: ask BennetLeff before reusing the design.
More from BennetLeff/temper
12- 6 layers164 × 234 mm
- 4 layers240 × 160 mm
- 4 layers60 × 60 mm
- 2 layers135 × 55 mm
- 2 layers100 × 45 mm
- 2 layers100 × 65 mm
- 2 layers60 × 35 mm
- 2 layers60 × 35 mm
- 2 layers80 × 83 mm
- 6 layers80 × 83 mm
- 2 layers100 × 80 mm
Similar boards
- 4 layers250 × 180 mm
Sic v3-power
FulongLi/AIPE-PCB-Agent
AIPE-PCB-Agent is the PCB design automation of the AIPE power-electronics ecosystem. Python generators turn a requirement file set (specification, insulation table, components, interfaces, floorplan and routing inputs)…
202 parts - 2 layers94.5 × 228 mm
- 2 layers45 × 55 mm
- 4 layers100 × 100 mm
FarmMesh Node
chinawrj/FarmMesh-Node
Developing an integrated hardware and software solution for farm-wide Mesh networking: RP2350B/ESP32-C5 nodes, firmware, network protocols, and Wi-Fi/BLE sensor access.
164 parts - 4 layers80 × 50 mm
USB POWER
ssmo-oss/UMI-Power-distribution
Three separate boards distribute a 12 V supply to the UMI system. D6 is the current prototype revision. It has not been physically qualified or approved for production.
38 parts - 4 layers65 × 75 mm
Microduck Power Regen R22
ldcyes/OpenDuck
已完成可编辑原理图、真实四层 PCB 和本地库。阶梯板面积 4510 mm²，比原 65×60 + 32×30 mm 两板总面积 4860 mm² 少 350 mm²（7.20%）。原 TDK 模块本体、四个安装孔和原 TDK 器件位置保留，回生电容采用原料号卧装，J1 因实际拔插通道冲突改为同系列 BM08 顶插。当前为工程候选，未制造，未完成热、回生瞬态、低电量或行走验收。
84 parts - 4 layers100 × 100 mm
Tankervision pdb
ikeefe12/tankervision-pdb
Four-layer KiCad power distribution board for the TankerVision robot: USB-C PD / barrel-jack input, supercapacitor-backed rail for clean Jetson shutdown, and four firmware-controlled protected output ports.
452 parts - 4 layers246.8 × 154.7 mm
Ac psu
johonkanen/ac_psu_kicad
test full kicad conversion of latest ac_psu hardware files done by claude. originally drawn in proteus
377 partsMIT